DF005S THRU DF10S SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:1.0A FEATURE DFS For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating:50 A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.0A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance Operating Temperature Range Storage and Operating Junction Temperature Vrrm Vrms Vdc DF 005S 50 35 50 DF 01S 100 70 100 DF 02S 200 140 200 DF 04S 400 280 400 DF 06S 600 420 600 DF 08S 800 560 800 DF 10S 1000 700 1000 V V V If(av) 1.0 A Ifsm 50.0 A Vf 1.1 V 10.0 500.0 25.0 -55 to +125 -55 to +150 µA mA Ir Cj Tj Tstg Pf °C °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 volt Rev.4 units www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DF005S THRU DF10S 1 Rev.4 www.gulfsemi.com