DB101 THRU DB107 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:1.0A FEATURE DB Ideal for printed circuit board Reliable low cost construction utilizing molded plastic Technique Surge overload rating:50 A peak UL recognized file # E-107371 MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.0A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance Operating Temperature Range Storage and Operation Junction Temperature Vrrm Vrms Vdc DB 101 50 35 50 DB 102 100 70 100 DB 103 200 140 200 DB 104 400 280 400 DB 105 600 420 600 DB 106 800 560 800 DB 107 1000 700 1000 V V V If(av) 1.0 A Ifsm 50.0 A Vf 1.1 V 10.0 500.0 25.0 -55 to +125 -55 to +150 µA µA Ir Cj Tj Tstg Pf °C °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 volt Rev.A5 units www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DB101 THRU DB107 1 1 Rev.A5 www.gulfsemi.com