HITTITE HMC392LC4

HMC392LC4
v03.0409
LOW NOISE AMPLIFIERS - SMT
8
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Typical Applications
Features
The HMC392LC4 is ideal for:
Gain: 16 dB
• Point-to-Point Radios
Noise Figure: 2.5 dB
• VSAT
Single Supply Voltage: +5V
No External Matching Components Required
• LO Driver for HMC Mixers
• Military EW, ECM,
C3 I
50 Ohm Matched Input/Output
• Space
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC392LC4 is a GaAs MMIC Low Noise Amplifier
which operates between 3.5 and 7.0 GHz. Housed
in a leadless 4x4 mm SMT package, this amplifier
provides 16 dB of gain, 2.5 dB noise figure and 30
dBm IP3 from a +5V supply voltage. HMC392LC4
functions well as a low noise front end or as a driver
amplifier. The RF I/Os are DC blocked and matched to
50 Ohms for ease of use. The HMC392LC4 allows the
use of surface mount manufacturing techniques and
is suitable for high reliability military, industrial and
space applications.
Electrical Specifi cations, TA = +25° C, Vdd= 5V
Parameter
Min.
Frequency Range
Gain
13.5
Gain Variation Over Temperature
16
25
30
Typ.
Max.
3.5 - 7.0
12.5
0.025
Units
GHz
14.5
0.018
dB
0.025
12
18
13
Saturated Output Power (Psat)
8 - 84
Min.
15
Output Return Loss
Output Third Order Intercept (IP3)
Max.
16
0.018
Input Return Loss
Output Power for 1 dB Compression (P1dB)
Typ.
4.0 - 6.0
dB/ °C
dB
12
dB
12
16
dBm
20
dBm
23
30
dBm
20
Noise Figure
2.5
3.1
2.9
3.5
dB
Supply Current (Idd)
55
75
55
75
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC392LC4
v03.0409
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
20
10
17
S21
S11
S22
-10
-20
14
+25C
+85C
-40C
11
8
-30
5
2
3
4
5
6
7
8
9
3
4
FREQUENCY (GHz)
Input Return Loss vs. Temperature
7
8
0
+25C
+85C
-40C
+25C
+85C
-40C
-5
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
6
Output Return Loss vs. Temperature
0
-10
-15
-20
-10
-15
-20
-25
-25
3
4
5
6
7
8
3
4
FREQUENCY (GHz)
5
6
7
8
FREQUENCY (GHz)
Noise Figure vs. Temperature
Reverse Isolation vs. Temperature
5
0
+25C
+85C
-40C
-10
ISOLATION (dB)
4
NOISE FIGURE (dB)
5
FREQUENCY (GHz)
LOW NOISE AMPLIFIERS - SMT
20
0
8
Gain vs. Temperature
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
3
2
1
+25C
+85C
-40C
-20
-30
-40
-50
-60
0
3
4
5
6
FREQUENCY (GHz)
7
8
3
4
5
6
7
8
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 85
HMC392LC4
v03.0409
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Psat vs. Temperature
22
22
20
20
18
18
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature
16
14
16
+25C
+85C
-40C
14
+25C
+85C
-40C
12
12
10
10
3
4
5
6
7
8
3
4
5
FREQUENCY (GHz)
GAIN (dB), NOISE FIGURE (dB), P1dB (dBm)
30
28
26
+25C
+85C
-40C
22
20
3
4
5
7
6
7
8
20
16
Gain
Noise Figure
P1dB
12
8
4
0
4.5
4.7
5
5.2
VOLTAGE SUPPLY (V)
FREQUENCY (GHz)
Power Compression @ 5.5 GHz
Pout (dBm), GAIN (dB), PAE (%)
25
20
15
10
Pout
Gain
PAE
5
0
-11
-9
-7
-5
-3
-1
1
3
5
7
INPUT POWER (dBm)
8 - 86
8
Gain, Noise Figure & Power
vs. Supply Voltage @ 5.5 GHz
32
24
6
FREQUENCY (GHz)
Output IP3 vs. Temperature
IP3 (dBm)
LOW NOISE AMPLIFIERS - SMT
8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5.5
HMC392LC4
v03.0409
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Drain Bias Voltage (Vdd)
+7 Vdc
RF Input Power (RFIN)(Vdd = +5.0 Vdc)
+11 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 6.5 mW/°C above 85 °C)
0.42 W
Thermal Resistance
(channel to ground paddle)
155 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
+4.5
54
+5.0
55
+5.5
56
Note: Amplifi er will operate over full voltage ranges shown
above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
8
LOW NOISE AMPLIFIERS - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 87
HMC392LC4
v03.0409
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
LOW NOISE AMPLIFIERS - SMT
8
8 - 88
Pin Descriptions
Pin Number
Function
Description
1, 5 - 14,
18 - 20, 22 - 24
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
2, 4, 15, 17
GND
Package bottom has an exposed metal paddle that must
also be connected to RF/DC ground.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
16
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
21
Vdd
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1000pF, and 2.2 μF are required.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC392LC4
v03.0409
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
8
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 117490 [1]
Item
J1, J2
Description
SMA
J3 - J4
DC Pin
C1
100 pF capacitor, 0402 pkg.
C2
1,000 pF Capacitor, 0603 pkg.
C3
2.2μF Capacitor, Tantalum
U1
HMC392LC4 Amplifier
PCB [2]
117858 Evaluation PCB
[1] Reference this number when ordering complete evlaution PCB
[2] Circuit Board Material: Rogers 4350.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 89