HITTITE HMC641

HMC641
v01.0108
SWITCHES - CHIP
4
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
Typical Applications
Features
The HMC641 is ideal for:
Broadband Performance: DC - 18 GHz
• Telecom Infrastructure
High Isolation: 42 dB @ 12 GHz
• Microwave Radio & VSAT
Low Insertion Loss: 2.1 dB @ 12 GHz
• Military & Space Hybrids
Integrated 2:4 TTL Decoder
• Test Instrumentation
Small Size: 1.92 x 1.60 x 0.10 mm
Functional Diagram
General Description
The HMC641 is a broadband non-reflective GaAs
PHEMT SP4T switch chip. Covering DC to 18 GHz,
this switch offers high isolation and low insertion
loss and extends the frequency coverage of Hittite’s
SP4T switch product line. This switch also includes
an on board binary decoder circuit which reduces
the number of required logic control lines to two. The
switch operates using a negative control voltage of
0/-5V, and requires a fixed Vss bias of -5V. All data
is tested with the chip in a 50 Ohm test fixture connected via one 3.0 x 0.5 mil gold ribbon of minimal
length on each RF port.
Electrical Specifi cations, TA = +25° C, With 0/-5V Control, Vss= -5V, 50 Ohm System
Parameter
Frequency
Typ.
Max.
Units
1.8
2.8
2.1
3.1
dB
dB
Insertion Loss
Isolation (RFC to RF1 - RF4)
DC - 12 GHz
DC - 18 GHz
39
37
42
40
dB
dB
DC - 12 GHz
DC - 18 GHz
12
11
15
14
dB
dB
Return Loss
“On State”
Return Loss
“Off State”
DC - 18 GHz
12
15
dB
Input Power for 1 dB Compression
2.05- 18 GHz
21
24
dBm
Input Third Order Intercept
(Two-Tone Input Power= +14 dBm Each Tone)
0.05 - 18 GHz
37
40
dBm
14
95
ns
ns
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
4 - 38
Min.
DC - 12 GHz
DC - 18 GHz
DC - 18GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC641
v01.0108
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
Insertion Loss vs. Temperature
Isolation
0
-10
-1
ISOLATION (dB)
-2
-3
+25 C
+85 C
- 55 C
-4
RF1
RF2
RF3
RF4
-20
-30
-40
4
-50
-60
-5
-70
0
2
4
6
8
10
12
14
16
18
20
0
2
4
6
8
FREQUENCY (GHz)
Return Loss
12
14
16
18
20
16
18
1 dB Input Compression Point
28
INPUT COMPRESSION POINT (dBm)
0
RFC
RF1,2,3,4 On
RF1,2,3,4 Off
-5
-10
-15
-20
-25
26
24
22
20
18
0
2
4
6
8
10
12
14
16
18
20
0
2
4
6
FREQUENCY (GHz)
8
10
12
14
FREQUENCY (GHz)
Input Third Order Intercept
Point @ +14 dBm Tone Power
50
45
40
IP3 (dBm)
RETURN LOSS (dB)
10
FREQUENCY (GHz)
SWITCHES - CHIP
INSERTION LOSS (dB)
0
35
30
25
20
15
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4 - 39
HMC641
v01.0108
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
IP3 vs. Input Tone Power @ 12 GHz
44
44
42
42
40
40
IP3 (dBm)
4
IP3 (dBm)
IP3 vs. Input Tone Power @ 500 MHz
38
SWITCHES - CHIP
36
36
34
34
0
2
4
6
8
10
12
14
0
2
4
6
POWER (dBm)
8
10
12
14
POWER (dBm)
Absolute Maximum Ratings
Bias Voltage Range (Vss)
-7 Vdc
Control Voltage Range (A & B)
Vss -0.5V to +1 Vdc
Channel Temperature
150 °C
Thermal Resistance
Channel to die bottom (Insertion Loss Path)
188 °C/W
Thermal Resistance
Channel to die bottom (Terminated Path)
222 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
Maximum Input Power
+24 dBm
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
4 - 40
38
Truth Table
Control Input
Signal Path State
A
B
RFC to:
High
High
RF1
Low
High
RF2
High
Low
RF3
Low
Low
RF4
Bias Voltage & Current
Vss Range= -5.0 Vdc ±10%
Vss
(Vdc)
Iss (Typ)
(mA)
Iss (Max)
(mA)
-5
3
6
TTL/CMOS Control Voltages
State
Bias Condition
Low
-3V to 0 Vdc @ 60 uA Typ.
High
-5 to -4.2 Vdc @ 5 uA Typ.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC641
v01.0108
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
Outline Drawing
SWITCHES - CHIP
4
Die Packaging Information [1]
NOTES:
1. DIMENSIONS IN INCHES [MILLIMETERS].
2. DIE THICKNESS IS 0.004”.
Standard
Alternate
WP-18 (Waffle Pack)
[2]
[1] Refer to the “Packaging Information” section for die
packaging dimensions.
[2] For alternate packaging information contact Hittite
Microwave Corporation.
3. TYPICAL BOND PAD IS 0.004” SQUARE.
4. TYPICAL BOND PAD SPACING IS 0.006” CENTER TO CENTER.
5. BOND PAD METALLIZATION: GOLD.
6. BACKSIDE METALLIZATION: GOLD.
7. BACKSIDE METAL IS GROUND.
8. NO CONNECTION REQUIRED FOR UNLABELED BOND PADS.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4 - 41
HMC641
v01.0108
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
Pad Descriptions
Pad Number
SWITCHES - CHIP
4
Function
Description
1, 2, 3, 7, 8
RFC, RF1, RF2,
RF3, RF4
These pads are DC coupled and matched to
50 Ohms. Blocking capacitors are required if
RF line potential is not equal to 0V.
4
CTLA
See Truth Table and Control Voltage Table.
5
CTLB
See Truth Table and Control Voltage Table.
6
Vss
Supply Voltage -5.0 Vdc ± 10%.
Die Bottom
GND
Die Bottom must be connected to RF/DC ground.
Interface Schematic
TTL Interface Circuit
Note:
Control inputs A and B can be driven directly with TTL logic with -5 Volts
applied to the HCT logic gates Vee pin and to Vss Pad of the RF Switch.
4 - 42
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC641
v01.0108
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 18 GHz
Assembly Diagram
SWITCHES - CHIP
4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4 - 43