SUT290 Dual NPN-PNP complementary Bipolar transistor Features • Low VCE(sat)=0.5V (Typ.) • Simplified circuit design • Reduced component count Applications • Push-Pull or Totem-Pole configuration • MOSFET and IGBT gate driving • Motor, relay and solenoid driving SOP-8 Internal schematic diagram Description The SUT290 is a Hybrid dual NPN-PNP complementary power bipolar transistor manufactured by using the latest low voltage planar technology. The SUT290 is housed in dual island SOP-8 package with separated terminals for higher assembly flexibility, specifically recommended to be used in Push-Pull or Totem Pole configuration as post IGBTs and MOSFETs driver. Ordering Information Type NO. Marking Package Code SUT290 SUT290 SOP-8 Absolute Maximum Ratings Characteristic (Ta=25°C) Symbol Rating Tr1 Tr2 Unit Collector-base voltage VCBO 40 -40 V Collector-emitter voltage VCEO 32 -32 V Emitter-base voltage VEBO 5 -5 V Collector current IC 2 -2 A Power dissipation PD※ Junction temperature Storage temperature range 2 W/TOTAL 1.4 W/ELEMENT TJ 150 °C Tstg -55~150 °C ※: When mounted on 40x40x0.8 ㎜ ceramic substrate KSD-T7F006-001 1 SUT290 Electrical Characteristics [Tr1] Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO IC=50uA, IE=0 40 - - V Collector-emitter breakdown voltage BVCEO IC=1mA, IB=0 32 - - V Emitter-base breakdown voltage BVEBO IC=50uA, IC=0 5 - - V Collector cut-off current ICBO VCB=20V, IE=0 - - 1 μA Emitter cut-off current IEBO VEB=4V, IC=0 - - 1 μA DC current gain hFE VCE=3V, IC=0.5A 120 - 320 - Collector-emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) IC=2A, IB=200mA - 0.5 0.8 V fT VCE=5V, IC=10mA - 100 - MHz VCB=10V, IE=0, f=1MHz - 30 - pF Cob Electrical Characteristics [Tr2] Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO IC=-50uA, IE=0 -40 - - V Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -32 - - V Emitter-base breakdown voltage BVEBO IC=-50uA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-20V, IE=0 - - -1 μA Emitter cut-off current IEBO VEB=-4V, IC=0 - - -1 μA DC current gain hFE VCE=-3V, IC=-0.1A 120 - 320 - Collector-emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) IC=-2A, IB=-200mA - -0.5 -0.8 V fT VCE=-5V, IC=-500mA - 150 - MHz VCB=-10V, IE=0, f=1MHz - 50 - pF Cob KSD-T7F006-001 2 SUT290 Electrical Characteristic Curves [TR1] Fig. 2 IC - VBE ㎃ Fig. 1 hFE - IC ㎃ Fig. 3 I C - VCE Fig. 4 VCE(sat) - IC ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ KSD-T7F006-001 3 SUT290 Electrical Characteristic Curves [TR2] Fig. 1 hFE - IC ㎃ Fig. 2 IC - VBE ㎃ Fig. 3IC - VCE Fig. 4 VCE(sat) - IC ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ ㎃ KSD-T7F006-001 4 SUT290 Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-T7F006-001 5 SUT290 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T7F006-001 6