SUT483J Epitaxial planar NPN/PNP silicon transistor Description • Complex type bipolar transistor Feature • Small package save PCB area • Reduce quantity of parts and mounting cost • Both 2SA1980 chip and 2SC5343 chip in SOT-363 package Package : SOT-363 Ordering Information Type NO. Marking Package Code 3X □ SUT483J SOT-363 ① ② ①Device Code ②Year&Week Code Equivalent circuit & PIN Connections • Equivalent Circuit 3 2 Tr2 4 5 1 Tr1 PIN Connections 1. 2. 3. 4. 5. 6. Emitter 1 Base 1 Collector 2 Emitter 2 Base 2 Collector 1 6 Absolute Maximum Ratings [Tr1, Tr2] Characteristic (Ta=25°C) Symbol Rating Tr1 Tr2 Unit Collector-base voltage VCBO 60 -50 V Collector-emitter voltage VCEO 50 -50 V Emitter-base voltage VEBO 5 -5 V IC 150 -150 mA Collector current Collector power dissipation Junction temperature Storage temperature range PC※ 200 mW TJ 150 °C Tstg -55~150 °C ※: Total rating KSD-T5S001-002 1 SUT483J Electrical Characteristics [ Tr1 ] (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=1mA, IB=0 50 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA DC current gain hFE VCE=6V, IC=2mA 120 - 400 - IC=100mA, IB=10mA - - 0.25 V VCE=6V, IC=2mA - 0.65 - V VCE=10V, IC=10mA - 200 - MHz VCB=10V, IE=0, f=1MHz - 2 - pF Collector-emitter saturation voltage VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance Cob Test Condition Min. Typ. Max. Electrical Characteristics [ Tr2 ] Unit (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -0.1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 μA DC current gain hFE VCE=-6V, IC=-2mA 120 - 400 - IC=-100mA, IB=-10mA - - -0.3 V VCE=-6V, IC=-2mA - -0.65 - V VCE=-10V, IC=-10mA - 200 - MHz VCB=-10V, IE=0, f=1MHz - 4 - pF Collector-emitter saturation voltage VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance Cob Test Condition KSD-T5S001-002 Min. Typ. Max. Unit 2 SUT483J Electrical Characteristic Curves [ Tr1 ] Fig. 1 IC -VBE Fig. 2 IC -VCE ㎂ Fig. 3 hFE-IC Fig. 4 VCE(sat)-IC [ Tr2 ] Fig. 1 IC -VBE Fig. 2 IC -VCE ㎂ KSD-T5S001-002 3 SUT483J Electrical Characteristic Curves Fig. 3 hFE-IC Fig. 4 VCE(sat)-IC KSD-T5S001-002 4 SUT483J Outline Dimension ※ Recommend PCB solder land KSD-T5S001-002 [Unit: mm] 5 SUT483J The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5S001-002 6