SUT465N Dual NPN+PNP complementary Bipolar transistor Descriptions • Complex type bipolar transistor Features • Reduce quantity of parts and mounting cost • High collector power dissipation : PC=300mW(Max.) • 2 NPN+PNP Chips in SOT-26 PKG Package : SOT-26 Ordering Information Type NO. Marking Package Code SUT465N 5N◇□ SOT-26 ◇: Hfe rank, □ : Year & Week Code PIN Assignment & Description Pin Description 1 Emitter 2 2 Base 2 3 Collector 1 4 Emitter 1 5 Base 1 6 Collector 2 [Pin Assignment] Absolute Maximum Ratings [Tr1, Tr2] Characteristic Symbol Ratings Tr1 Tr2 Unit Collector-Base voltage VCBO 75 -60 V Collector-Emitter voltage VCEO 40 -40 V Emitter-Base voltage VEBO 5 -5 V IC 600 -600 mA(DC) ICP* 1.2 -1.2 A(AC) Collector current Collector power dissipation PC** 300 mW Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C * : Single pulse, tp= 300 ㎲ ** : Total rating(Each terminal mounted on a recommended solder land) KSD-T5P006-001 1 SUT465N Electrical Characteristics [ Tr1 ] Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=10μA, IE=0 75 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 40 - - V Emitter-Base breakdown voltage BVEBO IE=10μA, IC=0 5 - - V Collector cut-off current ICBO VCB=75V, IE=0 - - 20 nA DC current gain hFE VCE=10V, IC=10mA 100 - - - - - 0.4 V 250 - - MHz VCB=10V, IE=0, f=1MHz - - 8 pF VCC=30Vdc, VBE(off)=0.5Vdc, IC=150mAdc, IB1=15mAdc - - 10 ns - - 25 ns - - 225 ns - - 60 ns Collector-Emitter saturation voltage VCE(sat) Transition frequency VCE=20V, IC=20mA, f=100MHz fT Collector output capacitance Cob Delay time td Rise time tr Storage time ts Fall Time tf IC=150mA, IB=15mA VCC=30Vdc,IC=150mAdc, IB1=IB2=15mAdc Electrical Characteristics [ Tr2 ] Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10μA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -40 - - V Emitter-Base breakdown voltage BVEBO IE=-10μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-40V, IE=0 - - -20 nA DC current gain hFE VCE=-10V, IC=-10mA 100 - - - Collector-Emitter saturation voltage Transition frequency VCE(sat) IC=-150mA, IB=-15mA - - -0.4 V fT VCE=-5.0V, IC=-20mA, f=100MHz 200 - - MHz - - 8 pF - - 45 ns - - 10 ns - - 40 ns - - 100 ns - - 80 ns - - 30 ns Collector output capacitance Cob Turn-on time ton VCC=-30Vdc,IC=-150mAdc, IB1=-15mAdc Delay time td Rise time tr Turn-off time toff Storage time ts Fall time tf VCB=-10V, IE=0, f=1MHz VCC=-6.0Vdc,IC=-150mAdc, IB1=IB2=-15mAdc KSD-T5P006-001 2 SUT465N Electrical Characteristic Curves [ Tr1 ] Fig. 1 PC-Ta ㎽ Fig. 2 hFE-IC Fig. 3 VCE(sat)-IC Fig. 4 Cob-VCB [ Tr2 ] Fig. 5 hFE-IC Fig. 6 VCE(sat)-IC KSD-T5P006-001 3 SUT465N Electrical Characteristic Curves Fig. 7 Cob-VCB KSD-T5P006-001 4 SUT465N SOT-26 Outline Dimension(mm) ※ Recommend PCB solder land [Unit: mm] KSD-T5P006-001 5 SUT465N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5P006-001 6