PM-15 15W Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Ultra-miniature size, light weight Cooling by free air convection Isolation class ANSI/AAMI ES60601-1/IEC60601-1/EN60601-1 medical safety approved No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability 3 years warranty SPECIFICATION MODEL DC VOLTAGE OUTPUT INPUT PM-15-24 24V 3.5A 3A 1.25A 1A 0.63A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A RATED POWER 11.55W 15W 15W 15W 15.12W 80mVp-p 150mVp-p 150mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.35A/115VAC 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 76% 78% 79% 81% 0.2A/230VAC COLD START 30A/115VAC 50A/230VAC OVERLOAD Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 13.8 ~ 16.2V 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off o/p voltage, clamping by zener diode 17.25 ~ 20.25V 27.6 ~ 32.4V -20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved I/P-O/P:4KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A DIMENSION 75*53*22.7mm (L*W*H) 0.14Kg; 120pcs/17.8Kg/0.97CUFT PACKING NOTE PM-15-15 15V 0 ~ 3.5A WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE OTHERS PM-15-12 12V CURRENT RANGE WORKING TEMP. (Note 4) PM-15-5 5V RATED CURRENT PROTECTION EMC PM-15-3.3 3.3V 499.7Khrs min. MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:PM-15-SPEC 2012-02-20 PM-15 15W Output Switching Power Supply Mechanical Specification Case No. 950A Unit:inch(mm) 0.256"(6.5mm) 2.09"(53mm) 0.256" (6.5mm) 2.441"(62mm) 0.89"(22.7mm) 0.041"(1.05mm) 0.788"(20mm) AC/N 2.95"(75mm) series AC/L BOTTOM VIEW 0.138" (3.5 1mm) -V +V 0.906" (23.01mm) 0.59" (15mm) Block Diagram fosc : 67KHz RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING PWM CONTROL Derating Curve +V -V DETECTION CIRCUIT Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:PM-15-SPEC 2012-02-20