Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3312175371 Item: SIL12-1A75-71Q Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 75 Contact-form Contact-material Contact rating Switching voltage (<31 AT) Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (20-30 AT) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning A Rhodium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value & % ' Start Value $ % !"! % ! & RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( )* Conditions Min Typ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit ( + mineral filled epoxy FeNi alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz / /0 wave soldering max. 5 sec. . Unit , , - fully sealed Modifications in the sense of technical progress are reserved Designed at: 08.03.04 Designed by: SCHELLHORN Approval at: 31.10.08 Approval by: KOLBRICH Last Change at: 20.07.09 Last Change by: KSCHIELENSKI Approval at: 20.07.09 Approval by: KOLBRICH Version: 3