Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2116615064 Item: KSK-1E66/1-BV15064 Magnetic properties Conditions Min Typ Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Environmental data Remarks 1. Shock Vibration Ambient temperature Storage temperature Soldering temperature Min Typ Max Unit 66/1 E - bistable NO Rhodium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ ! !$ Start Value & $ ' ! & Start Value % RH <45 %, 200 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ( % Conditions Min 1/2 sine wave duration 11ms from 10 - 2000 Hz wave soldering max. 5 sec. Typ Max Unit magnetic latching cont. with internal AlNiCo magn. ) % ) ,% + * , + * Conditions General data Unit KMS-21 Conditions Contact data 66/1 Max Min Remarks 3. Remarks 4. Typ Max Unit Do not mount around ferromagnetic materials. Do not cut or bend the switch leads. Modifications in the sense of technical progress are reserved Designed at: 05.09.08 Designed by: WKOVACS Approval at: Last Change at: 19.11.09 Last Change by: WKOVACS Approval at: 07.01.09 Approval by: Approval by: TFRITSCHI Version: 03