Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3224166016 Item: DIP24-1A66-16L Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Thermal Resistance Pull-In voltage Drop-Out voltage Contact data 66/1 Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Capacitance Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Connection pins Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" #$%"& ' ( )"%&% )" Start Value ! * $ ) +$" # "% "* Start Value RH <45 %, 200 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch , # # -. Conditions Min Typ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit , / epoxy resin CuFe tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz 2 2 3 wave sodering max. 5 sec. fully sealed Unit 0 0 1 1 1 Modifications in the sense of technical progress are reserved Designed at: 05.05.06 Designed by: KMUELLER Approval at: Last Change at: 03.11.08 Last Change by: THAUKE Approval at: 03.11.08 Approval by: Approval by: JHEYDER Version: 2