Europe: +49 / 7733 9487 0 | Email: [email protected] USA: +1 / 508 539 0002 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Coil Data at 20 °C Item No.: 3224175013 Item: DIP24-1A75-13L Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 75 Contact-form Contact-material Contact rating Switching voltage (<31 AT) Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (20-30 AT) Operate time incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning A Rhodium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ Start Value % & "#" & RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz ' () Conditions Min RH <45%, 100 V test voltage according to IEC 255-5 Typ Max epoxy resin Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz . . / max. 5 sec Unit ' * Unit + + , , , fully sealed Modifications in the sense of technical progress are reserved Designed at: 12.09.07 Designed by: THAUKE Approval at: Last Change at: 13.09.07 Last Change by: RRIPPL Approval at: 13.09.07 Approval by: Approval by: RRIPPL Version: 1