Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3305190051 Item: SIL05-1C90-51L Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 90 Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning C Rhodium not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive !" # $ % ! % Start Value & % ' & Start Value RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ( Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 Typ Max ) Unit ( * mineral-filled epoxy FeNi-alloy tinned Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz - . wave soldering max. 5 sec. Unit + + , , fully sealed Modifications in the sense of technical progress are reserved Designed at: Last Change at: 20.01.09 Designed by: Last Change by: THAUKE Approval at: Approval at: 20.01.09 Approval by: Approval by: JHEYDER Version: 1