CC2564-BlueBridge www.ti.com SWRS129 – OCTOBER 2012 Bluetooth® 4.0 Low Energy Embedded Dual Mode Module from Stonestreet One and BlueRadio - BR-LE4.0-D2 FEATURES 1 • 23 • • • • • • • • • • • • Three Types of Models: With or Without RF Chip Antenna, or U.FL Connector FCC, IC, CE, RoHS, and Bluetooth® Ver 4.0 Compliant ISM 2.4GHz Band Module. Code Space in Texas Instruments MSP430 for Client Applications (100 kB Flash, 4 kB RAM) Baseband is TI Dual Mode CC2564 UART, SPI Data Interface (2-wire or 4-wire with CTS, RTS) Analog, RTC, Battery Monitor, Temperature Sensor, Watchdog Timer Includes Integrated Software Stack, Profiles, and AT Modem Like Commands Embedded Bluetopia® Bluetooth Stack Protocols and Profiles Include: SPP, GAP, GATT, SMP, ATT, L2CAP, BATT, and so on Combines the Standard BR, EDR Offering with Additional Support for Bluetooth Low Energy UART Baud Rate Speeds: 9600 bps up to 1 Mbps +500 Meter (1640 Feet) Est. Distance Line of Sight (LOS) with Chip Antenna Running SPP Software Adjustable Transmit Power from Short to Long Range Applications (Class1, 2, and 3) Low Power Consumption (24 mA TX, 18 mA RX, 0.1 mA Idle Mode, and 0.2 µA Deep Sleep Timer) Small-form Factor SMT Radio Modem that Requires NO External Components • • Operating Temperature Range: -40°C to approximately 85ºC. Secure and Robust Communication Link with Billions of Unique Codes – FHSS (Frequency Hopping Spread Spectrum) – 24 bit CRC Error Correction for Ensured Packet Delivery – AES-128 Bit Encryption Using CCM for Encryption and Authentication of Packets APPLICATIONS • • • • • • • • • • • • • • • Human Interface Devices – Keyboard, Mouse, Remote Control Sports and Leisure Equipment Mobile Phone Accessories Remote Control for Computers, MP3 Player Consumer Electronics Remote Monitoring and Control Health Care and Medical Smart Grid Automated Meter Reading (AMR) Home, Building Automation Machine-to-Machine (M2M) Wireless Sensor Networks Wireless Alarms and Security Lighting and HVAC Control Proximity and out of Range Detection DESCRIPTION BlueBridge BR-LE4.0-D2 is a standalone Dual mode intelligent module solution and requires no external stack or external components. Custom client applications can be written directly onto the BlueBridge smart ready module, which supports both analog and digital peripherals, eliminating the need for a second costly microprocessor. It comes in three types of models with/without RF chip antenna, or U.FL connector and is an FCC, IC, CE, RoHS, and Bluetooth® Ver 4.0 compliant ISM 2.4 GHz band module. 1 2 3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2012, Texas Instruments Incorporated CC2564-BlueBridge SWRS129 – OCTOBER 2012 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. DESCRIPTION CONTINUED More information on the product can be found on BlueRadio’s website: • Product Overview: – http://www.blueradios.com/hardware_LE4.0-D2.htm – http://www.stonestreetone.com/dualmodemodule.cfm • Data sheet: http://www.stonestreetone.com/pdf/BR-LE4.0-D2A.pdf More information on TI’s wireless platform solutions for Bluetooth can be found on TI's Wireless Connectivity Wiki (www.ti.com/connectivitywiki). 2 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CC2564-BlueBridge IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated