POWER FACTOR CORRECTION INDUCTORS P192 SERIES • PCB mounted PFC inductor with Aux winding • Ultra low audio noise design • Ultra low heat dissipation design • Switching Frequency: >45KHz • Input: 85Vac - 265Vac, 43Hz - 63Hz • Operating Temperature: -40°C to +100°C • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Idc (A) Rdc (3-4) (Ω MAX) Rdc (9-10) (Aux) (Ω MAX) Turns Ratio Pri:Aux (±2%) Dimension P192- L (3-4) (Pri) (μH ±10%) 501-2 500 2.5 0.20 0.18 5:1 A 401-3 400 3.0 0.20 0.18 5:1 A 301-4 300 4.0 0.20 0.18 5:1 A 601-2 600 2.5 0.20 0.18 5:1 B 501-3 500 3.0 0.15 0.25 5:1 B 401-4 400 4.0 0.15 0.25 5:1 B 301-5 300 5.5 0.15 0.30 5:1 B Note: 1. Inductance test @ 100KHz, 0.1Vrms 2. Idc: 10% roll off max from initial inductance value 3. Hipot: 1500Vrms, 5S, 1 mA, Pri to Aux DIMENSIONS (mm) DIMENSION A SCHEMATIC DIMENSION B Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]