Industrial Panel PC with 15 in. LCD NI PPC-2115 NEW! • 1 GHz Intel Celeron M processor • 40 GB hard drive and 512 MB RAM • Fanless cooling for NI programmable automation controllers (PACs) • 15 in. XGA TFT color LCD • Thin 2.5 in. depth to save panel space • Gigabit and fast Ethernet support Mounting and Certification • 0 to 50 °C operating range • NEMA4/IP65-compliant front panel • Panel-mount brackets included Overview Rugged Industrial Design The National Instruments PPC-2115 is a fanless industrial panel PC (PPC) with a built-in touch screen. The NI PPC-2115 offers a thin 2.5 in. display to save panel space and a 1 GHz Celeron M processor with a rugged 15 in. TFT color LCD display for large human machine interface (HMI) applications. Combine the NI LabVIEW Datalogging and Supervisory Control (DSC) Module with the PPC-2115 to deploy LabVIEW front panels. The PPC-2115 offers fanless cooling over a 0 to 50 °C operating temperature range. The reduced depth of the PPC-2115 saves limited rack and panel space on the plant floor while providing 15 in. of touch screen control for large HMI applications. The PPC-2115 touch screen display features tempered antireflective glass that is coated to minimize scratching. NEMA4/IP65 compliance ensures that the unit meets hose-down requirements. The PPC-2115 features extended shock, vibration, and temperature ratings plus global safety standards and agency certifications. Touch Screen and Display Specifications The PPC-2115 offers a high-quality 15 in. thin film transistor (TFT) display with a touch screen. See Table 2 for key display and touch screen specifications. Display Contrast ratio Luminance Maximum colors LCD Maximum resolution Touch Screen resolution PPC-2115 15 in. XGA TFT LCD 500:1 350 cd/m2 262 k 1024 x 768 1024 x 1024 COM3 LAN1 LAN2 USB PS/2 (RS232) COM4 (RS232/ 422/485) COM1 (RS232) The PPC-2115 delivers a wide range of connectivity options as shown in Table 2. The locations for the different connectivity options are shown in Figure 1. Connectivity PPC-2015 PPC-2115 NI Hardware PCI slots 2 – M Series, S Series, R Series, E Series Parrallel ports 1 1 Printers RS232/422/485 1/1 2/1 Compact FieldPoint and CompactRIO (RS232) PCMCIA Type II 2 1 DAQCard-60xxE Hi-Speed USB 5 2 NI CompactDAQ and USB DAQ Ethernet 10/100 1 1 Compact FieldPoint, CompactRIO, PXI/CompactPCI Gigabit Ethernet, – 1 Compact FieldPoint, CompactRIO, PXI/CompactPCI 10/100/1000 Table 1. PPC-2015 and PPC-2115 Display Comparison Parallel Port Panel PC Connectivity Options VGA PS/2 CompactFlash 2 – 1 1 Table 2. Connectivity Options for NI Panel PCs Figure 1. Bottom View of PPC-2115 Showing Connectivity Options Mouse and keyboard Removable data-logging memory Industrial Panel PC with 15 in. LCD By using open industry standards such as PCI, USB, and Ethernet, the PPC-2115 and NI control hardware combined with LabVIEW graphical system design software provide the following: • A single environment for HMI and logic • A complete solution for machine control from a single vendor • Tight integration of hardware and software system components • Device- and enterprise-level connectivity HMI with Industrial Distributed I/O With LabVIEW and LabVIEW DSC, you can create a SCADA system using NI Compact FieldPoint distributed I/O and CompactRIO embedded control and data acquisition. Ethernet and Serial HMI for LabVIEW DSC Ethernet and Serial Use LabVIEW DSC to quickly create custom graphical user interfaces and deploy them to the 15 in. panel PC. Figure 4. Panel PC Connects Using Ethernet to Compact FieldPoint and CompactRIO Figure 2. Panel PC with LabVIEW DSC HMI and Panel PC Controller for NI CompactDAQ Add up to two USB data acquisition devices to the PPC-2115 to create an industrial data acquisition application using LabVIEW and the National Instruments DAQ platform. USB Figure 3. PPC-2115 Panel PC Offers Two USB Ports for Connectivity to NI USB Data Acquisition Hardware Including NI CompactDAQ Ordering Information NI PPC-2115 with Windows XP ............................................779862-01 Accessories NI LabVIEW DSC Module ..................................................778311W-09 NI LabVIEW DSC, Run-Time ..............................................778312W-03 BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/hmi. BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 2 Industrial Panel PC with 15 in. LCD Safety Specifications This product is designed to meet the requirements of the following standards of safety for information technology equipment: System Hardware Display................................................. 15 in. XGA TFT color LCD with touch screen CPU .................................................... 1 GHz Intel Celeron M Memory ............................................... 512 MB RAM Storage................................................ 40 GB HDD LCD Maximum resolution........................... Maximum colors ................................. Pixel pitch (W x H, mm) ...................... Viewing angle ..................................... Luminance (cd/m2) .............................. Contrast ratio ...................................... Backlight.............................................. Backlight lifetime................................ 1024 x 768 (XGA) 256,000 0.3075 x 0.3075 120 deg 350 500:1 2 CCFL 50,000 h Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use: • EN 55024, CISPR 24 EMC requirements • EN 55022, CISPR 22 Emissions; Class A • CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A Note: For EMC compliance, operate this device according to product documentation. Connectivity Parallel port......................................... 1 Serial ports.......................................... 2 x RS232 (COM1 and COM3) and RS232/RS422/RS485 (COM4) Ethernet............................................... LAN 1 (10/100BaseT) LAN2 (10/100/1000BaseT) Mouse and keyboard .......................... 1 PS/2 port USB .................................................... 2 Hi-Speed USB ports Removable storage ............................. 1 CompactFlash slot PCMCIA ............................................... 1 slot Audio ................................................... 3 audio ports: 1 microphone, 1 line in, and 1 line out Touch Screen Touch screen type ............................... Base glass construction...................... Resolution ........................................... Light transmission............................... Power rating........................................ Durability............................................. • IEC 60950-1, EN 60950-1 • UL 60950-1, CSA 60950-1 CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: • 2006/95/EC; Low-Voltage Directive (safety) • 2004/108/EEC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Environmental Management Resistive Tempered glass 1024 x 1024 75% typical 3.3 to 5 V 100 million touches Power Input voltage ....................................... 18 to 32 VDC (the fuse becomes an open circuit if input exceeds 33 VDC) Typical ................................................. 24 VDC, 2.0 A Environment Operating temperature ....................... 0 to 50 °C (32 to 122 °F) Storage temperature........................... -20 to 60 °C (-4 to 140 °F) Humidity .............................................. 40 °C @ 10 to 95% relative humidity (noncondensing) Vibration.............................................. 1 grms (5 to 500 Hz) Maximum altitude............................... 2,000 m Pollution degree.................................. 2 National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial not only to the environment but also to NI customers. For additional environmental information, refer to the NI and the Environment Web page at ni.com/environment. This page contains the environmental regulations and directives with which NI complies, as well as any other environmental information not included in this document. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) 3 NI Services and Support NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. ni.com • 800 813 3693 National Instruments • [email protected] Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. *351515A-01* 351515A-01 2007-9138-161-101-D © 2007 National Instruments Corporation. All rights reserved. CompactRIO, DAQCard, FieldPoint, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI CompactDAQ, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments.