This version: Mar. 1999 Semiconductor MSC23CV432D-xxBS8 4,194,304-word x 32-bit DYNAMIC RAM MODULE : FAST PAGE MODE TYPE DESCRIPTION The MSC23CV432D-xxBS8 is a fully decoded, 4,194,304-word x 32-bit CMOS dynamic random access memory module composed of eight 16Mb DRAMs (4Mx4) in TSOP packages mounted with eight decoupling capacitors on a 72-pin glass epoxy small outline package. This module supports any application where high density and large capacity of storage memory are required. FEATURES · 4,194,304-word x 32-bit organization · 72-pin Small Outline Dual In-line Memory module MSC23CV432D-xxBS8 : Gold tab · Single +3.3V supply ± 0.3V tolerance · Input : LVTTL compatible · Output : LVTTL compatible, 3-state · Refresh : 2048cycles/32ms · /CAS before /RAS refresh, hidden refresh, /RAS only refresh capability · Fast page mode capability · Multi-bit test mode capability · 11/11 Addressing (Row/Column) PRODUCT FAMILY tRAC tAA tCAC Cycle Time (Min.) MSC23CV432D-60BS8 60ns 30ns 15ns 110ns 2592mW MSC23CV432D-70BS8 70ns 35ns 20ns 130ns 2304mW Access Time (Max.) Family Power Dissipation Operating (Max.) Standby (Max.) 14.4mW Semiconductor MSC23CV432D MODULE OUTLINE (Unit : mm) MSC23CV432D-xxBS8 3.80Max. 25.4±0.13 3.18±0.13 5.5Min. 71 1 2.0±0.13 2.62Typ. *1 1.00±0.1 44.45±0.1 59.69±0.2 *1 The common size difference of the board width 19.78mm of its height is specified as ±0.2. The value above 19.78mm is specified as ±0.5. R2.0 1.0±0.1 17.78±0.13 1.8±0.1 0.25 Max. 72 2 3.25Typ. 2-φ1.8 3.03 44.45±0.1 51.66±0.1 R2.0 5.00 0.23 Min. 1.27±0.1 Semiconductor MSC23CV432D PIN CONFIGURATION Front Side Back Side Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name 1 VSS 37 DQ16 2 DQ0 38 DQ17 3 DQ1 39 VSS 4 DQ2 40 /CAS0 5 DQ3 41 /CAS2 6 DQ4 42 /CAS3 7 DQ5 43 /CAS1 8 DQ6 44 /RAS0 9 DQ7 45 NC 10 VCC 46 NC 11 PD1 47 /WE 12 A0 48 NC 13 A1 49 DQ18 14 A2 50 DQ19 15 A3 51 DQ20 16 A4 52 DQ21 17 A5 53 DQ22 18 A6 54 DQ23 19 A10 55 NC 20 NC 56 DQ24 21 DQ8 57 DQ25 22 DQ9 58 DQ26 23 DQ10 59 DQ27 24 DQ11 60 DQ28 25 DQ12 61 VCC 26 DQ13 62 DQ29 27 DQ14 63 DQ30 28 A7 64 DQ31 29 NC 65 NC 30 VCC 66 PD2 31 A8 67 PD3 32 A9 68 PD4 33 NC 69 PD5 34 /RAS2 70 PD6 35 DQ15 71 PD7 36 NC 72 VSS Presence Detect Pins Pin No. Pin Name -60 -70 11 PD1 NC NC 66 PD2 NC NC 67 PD3 VSS VSS 68 PD4 NC NC 69 PD5 NC VSS 70 PD6 NC NC 71 PD7 NC NC Semiconductor MSC23CV432D BLOCK DIAGRAM A0-A10 /RAS0 /CAS0 /WE /RAS2 /CAS2 A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC /CAS1 DQ0 DQ1 DQ2 DQ3 DQ DQ DQ DQ /OE VSS DQ4 DQ5 DQ6 DQ7 DQ DQ DQ DQ /OE VSS DQ8 DQ9 DQ10 DQ11 DQ DQ DQ DQ /OE VSS DQ12 DQ13 DQ14 DQ15 A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC /CAS3 VCC VSS DQ DQ DQ DQ /OE VSS C1-C8 DQ DQ DQ DQ /OE VSS DQ16 DQ17 DQ18 DQ19 DQ DQ DQ DQ /OE VSS DQ20 DQ21 DQ22 DQ23 DQ DQ DQ DQ /OE VSS DQ24 DQ25 DQ26 DQ27 DQ DQ DQ DQ /OE VSS DQ28 DQ29 DQ30 DQ31 Semiconductor MSC23CV432D ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Symbol Rating Unit VIN, VOUT -0.5 to +4.6 V Voltage on VCC Supply Relative to VSS VCC -0.5 to +4.6 V Short Circuit Output Current IOS 50 mA Power Dissipation PD * 8 W Operating Temperature TOPR 0 to +70 °C Storage Temperature TSTG -40 to +125 °C Voltage on Any Pin Relative to VSS * Ta = 25°C Recommended Operating Conditions ( Ta = 0°C to +70°C ) Parameter Symbol Min. Typ. Max. Unit VCC 3.0 3.3 3.6 V VSS 0 0 0 V Input High Voltage VIH 2.0 - VCC+0.3 V Input Low Voltage VIL -0.3 - 0.8 V Power Supply Voltage Capacitance ( VCC = 3.3V ± 0.3V, Ta = 25°C, f = 1 MHz ) Parameter Symbol Typ. Max. Unit Input Capacitance (A0 - A10) CIN1 - 57 pF Input Capacitance (/WE) CIN2 - 65 pF Input Capacitance (/RAS0, /RAS2) CIN3 - 35 pF Input Capacitance (/CAS0- /CAS3) CIN4 - 20 pF I/O Capacitance (DQ0 - DQ31) CDQ - 16 pF Semiconductor MSC23CV432D DC Characteristics (VCC = 3.3V ± 0.3V, Ta = 0°C to +70°C ) -60 Parameter Symbol -70 Condition Unit Min. Max. Min. Max. Note Input Leakage Current ILI 0V ≤ VIN ≤ VCC+0.3V; All other pins not under test = 0V -80 80 -80 80 µA Output Leakage Current ILO DQ disable 0V ≤ VOUT ≤ VCC -10 10 -10 10 µA Output High Voltage VOH IOH = -2.0mA 2.4 VCC 2.4 VCC V Output Low Voltage VOL IOL = 2.0mA 0 0.4 0 0.4 V Average Power Supply Current (Operating) ICC1 /RAS, /CAS cycling, tRC = Min. - 720 - 640 mA 1, 2 /RAS, /CAS = VIH - 16 - 16 mA 1 /RAS, /CAS ≥ VCC -0.2V - 4 - 4 mA 1 Power supply current (Standby) ICC2 Average Power Supply Current (/RAS only refresh) ICC3 /RAS cycling, /CAS = VIH, tRC = Min. - 720 - 640 mA 1, 2 Average Power Supply Current (/CAS before /RAS refresh) ICC6 /RAS cycling, /CAS before /RAS - 720 - 640 mA 1, 2 Average Power Supply Current (Fast Page Mode) ICC7 /RAS = VIL, /CAS cycling, tPC = Min. - 560 - 520 mA 1, 3 Notes: 1. ICC Max. is specified as ICC for output open condition. 2. The address can be changed once or less while /RAS = VIL. 3. The address can be changed once or less while /CAS = VIH. Semiconductor MSC23CV432D AC Characteristics (1/2) (VCC = 3.3V ± 0.3V, Ta = 0°C to +70°C ) Note: 1, 2, 3, 9, 10 -60 Parameter -70 Symbol Unit Min. Max. Min. Max. Note Random Read or Write Cycle Time tRC 110 - 130 - ns Fast Page Mode Cycle Time tPC 40 - 45 - ns Access Time from /RAS tRAC - 60 - 70 ns 4, 5, 6 Access Time from /CAS tCAC - 15 - 20 ns 4, 5 Access Time from Column Address tAA - 30 - 35 ns 4, 6 Access Time from /CAS Precharge t CPA - 35 - 40 ns 4 Output Low Impedance Time from /CAS tCLZ 0 - 0 - ns 4 /CAS to Data Output Buffer Turn-off Delay Time tOFF 0 15 0 20 ns 7 Transition Time tT 3 50 3 50 ns 3 Refresh Period tREF - 32 - 32 ms /RAS Precharge Time tRP 40 - 50 - ns /RAS Pulse Width tRAS 60 10K 70 10K ns /RAS Pulse Width (Fast Page Mode) tRASP 60 100K 70 100K ns /RAS Hold Time tRSH 15 - 20 - ns /CAS Precharge Time (Fast Page Mode) tCP 10 - 10 - ns /CAS Pulse Width tCAS 15 10K 20 10K ns /CAS Hold Time tCSH 60 - 70 - ns /CAS to /RAS Precharge Time tCRP 5 - 5 - ns /RAS Hold Time from /CAS Precharge tRHCP 35 - 40 - ns /RAS to /CAS Delay Time tRCD 20 45 20 50 ns 5 /RAS to Column Address Delay Time tRAD 15 30 15 35 ns 6 Row Address Set-up Time tASR 0 - 0 - ns Row Address Hold Time tRAH 10 - 10 - ns Column Address Set-up Time tASC 0 - 0 - ns Column Address Hold Time tCAH 10 - 15 - ns Column Address to /RAS Lead Time tRAL 30 - 35 - ns Read Command Set-up Time tRCS 0 - 0 - ns Read Command Hold Time tRCH 0 - 0 - ns 8 Read Command Hold Time referenced to /RAS tRRH 0 - 0 - ns 8 Semiconductor MSC23CV432D AC Characteristics (2/2) (VCC = 3.3V ± 0.3V, Ta = 0°C to +70°C ) Note: 1, 2, 3, 9, 10 -60 Parameter -70 Symbol Unit Min. Max. Min. Max. Write Command Set-up Time tWCS 0 - 0 - ns Write Command Hold Time tWCH 10 - 15 - ns Write Command Pulse Width tWP 10 - 10 - ns Write Command to /RAS Lead Time tRWL 15 - 20 - ns Write Command to /CAS Lead Time tCWL 15 - 20 - ns Data-in Set-up Time tDS 0 - 0 - ns Data-in Hold Time tDH 10 - 15 - ns /CAS Active Delay Time from /RAS Precharge tRPC 5 - 5 - ns /RAS to /CAS Set-up Time (/CAS before /RAS) tCSR 10 - 10 - ns /RAS to /CAS Hold Time (/CAS before /RAS) tCHR 10 - 10 - ns /WE to /RAS Precharge Time (/CAS before /RAS) tWRP 10 - 10 - ns /WE Hold Time from /RAS (/CAS before /RAS) tWRH 10 - 10 - ns /RAS to /WE Set-up Time (Test Mode) tWTS 10 - 10 - ns /RAS to /WE Hold Time (Test Mode) tWTH 10 - 10 - ns Note Semiconductor MSC23CV432D Notes: 1. A start-up delay of 200µs is required after power-up, followed by a minimum of eight initialization cycles (/RAS only refresh or /CAS before /RAS refresh) before proper device operation is achieved. 2. The AC characteristics assumes tT = 5ns. 3. VIH(Min.) and VIL(Max.) are reference levels for measuring input timing signals. Transition time (tT) are measured between VIH and VIL. 4. This parameter is measured with a load circuit equivalent to 1TTL loads and 100pF. The output timing reference levels are VOH = 2.0V and VOL = 0.8V. 5. Operation within the tRCD(Max.) limit ensures that tRAC(Max.) can be met. tRCD(Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD(Max.) limit, then the access time is controlled by tCAC. 6. Operation within the tRAD(Max.) limit ensures that tRAC(Max.) can be met. tRAD(Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD(Max.) limit, then the access time is controlled by tAA. 7. tOFF(Max.) define the time at which the output achieves the open circuit condition and are not referenced to output voltage levels. 8. tRCH or tRRH must be satisfied for a read cycle. 9. The test mode is initiated by performing a /WE and /CAS before /RAS refresh cycle. This mode is latched and remains in effect until the exit cycle is generated. The test mode specified in this data sheet is a 4-bit parallel test function. In a test mode CA0 and CA1 is not used. In a read cycle, if all internal bits are equal, the DQ pin will indicate a high level. If any internal bits are not equal, the DQ pin will indicate a low level. The test mode is cleared and the memory device returned to its normal operating state by performing a /RAS only refresh cycle or a /CAS before /RAS refresh cycle. 10. In a test mode read cycle, the value of access time parameters is delayed for 5ns for the specified value. These parameters should be specified in test mode cycle by adding the above value to the specified value in this data sheet.