PANDUIT D-101-31-ND

CUSTOMER DRAWING
Product
Name
D-101-31
L
max
17.25
(0.680)
Product Dimensions
øA
øB
min
min
4.55
5.00
(0.180)
(0.200)
Cable Dimensions
øE
øG
min
max
2.5
4.55
(0.100)
(0.180)
øD
max
5.00
(0.200)
J0.5
(J0.02)
7
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue.
APPLICATION
1. This part is designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the
dimensional criteria listed, having nickel plated copper shields.
2. Install using TE approved convection or infrared tools in accordance with TE assembly procedure RCPS-100-70.
3. Assemblies will meet requirements of TE specification RT-1404 and National Aerospace Standard NAS-1747.
4. Temperature range: -55C to +150C.
For best results, prepare the cable as shown:
TITLE:
SOLDERSLEEVE SHIELD
TERMINATOR
Unless otherwise specified dimensions are in
millimeters.[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
PREPARED BY:
ANGLES: N/A
ROUGHNESS
IN MICRON
CAGE CODE:
Raychem
Devices
Tyco Electronics Corporation reserves
the right to amend this drawing at any
time. Users should evaluate the
suitability of the product for their
application.
ECO NUMBER:
DOCUMENT NO.:
D-101-31
REV:
DATE:
C
SCALE:
YNGUYEN
06090
ECO-11-011935
© 2009-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
June 9, 2011
SIZE:
NTS
A
SHEET:
1 of 1