Advanced Information PE84140 Ultra-High Linearity Broadband Quad MOSFET Array Product Description The PE84140 is an ultra-high linearity, passive broadband Quad MOSFET array with high dynamic range performance capable of operation beyond 6.0 GHz. This quad array operates with differential signals at all ports (RF, LO, IF), allowing mixers to be built that use LO powers from -7 dBm to +20 dBm. Typical applications range from frequency up/down-conversion to phase detection for Cellular/PCS Base Stations, Wireless Broadband Communications and STB/Cable modems. Features • Ultimate Quad MOSFET array • Ultra-high linearity, broadband performance beyond 6.0 GHz • Ideal for mixer applications • Up/down conversion • Low conversion loss • High LO Isolation • Optimized for stringent military applications The PE84140 is optimized for stringent military applications. Fabricated in Peregrine’s patented UTSi® (Ultra Thin Silicon) CMOS technology, the PE84140offers excellent RF performance with the economy and integration of conventional CMOS. Figure 1. Functional Schematic Diagram Figure 2. Package Type 3.05 2.85 LO IF 8-lead MSOP 5.05 4.75 RF Table 1. AC and DC Electrical Specifications @ +25 °C Symbol Characteristics 1 Min DC Typ Max Units FTYP Operating Frequency Range VDS Drain-Source Voltage 6.0 GHz 330 mV VDS Match Drain-Source Voltage Match VT Threshold Voltage 20 mV -100 mV R DS Drain-Source ‘ON’ Resistance 8.25 Ω Test Conditions VGS = +3V, IDS = 40 mA VDS = 0.1V; per ASTM F617-00 VGS = +3V, IDS = 40 mA Note 1: Typical untested operating frequency range of Quad MOSFET transistors. PEREGRINE SEMICONDUCTOR CORP. | http://www.peregrine-semi.com Copyright Peregrine Semiconductor Corp. 2003 Page 1 of 5 PE84140 Product Specification Figure 3. Pin Configuration LOM 1 LOP 2 Electrostatic Discharge (ESD) Precautions 8 RFM 7 RFP This MOSFET device has minimally protected inputs and is highly susceptible to ESD damage. When handling this UTSi device, observe the same precautions that you would use with other ESDsensitive devices. PE84140 GND 3 6 GND IFP 4 5 IFM Latch-Up Avoidance Unlike conventional CMOS devices, UTSi CMOS devices are immune to latch-up. Table 2. Pin Descriptions Device Description Pin No. Pin Name 1 LOM LO Input Connection (Gate) 2 LOP LO Input Connection (Gate) 3 GND Ground Connection Description 4 IFP IF Output Connection (Drain) 5 IFM IF Output Connection (Drain) 6 GND Ground Connection 7 RFP RF Input Connection (Source) 8 RFM RF Input Connection (Source) The PE84140 passive broadband Quad MOSFET array is designed for use in up-conversion and down-conversion applications for high performance systems. The PE84140 is an ideal mixer core for a wide range of mixer products, including module level solutions that incorporate baluns or other singleended matching structures enabling three-port operation. Table 3. Absolute Maximum Ratings Symbol Parameter/Conditions Min Max Units TST Storage temperature range -65 150 °C TOP Operating temperature range -55 125 °C VDC + AC Maximum DC plus peak AC voltage across DrainSource ±3.3 V VDC+AC Maximum DC plus peak AC voltage across GateDrain or Gate-Source ±4.2 V ESD Sensitive Device 250 V VESD Copyright Peregrine Semiconductor Corp. 2003 Page 2 of 5 The performance level of this passive mixer is made possible by the very high linearity afforded by Peregrine’s UTSi CMOS process. File No. 70/0127~00A | UTSi CMOS RFIC SOLUTIONS PE84140 Product Specification Figure 4. Typical Schematic PEREGRINE SEMICONDUCTOR CORP. | http://www.peregrine-semi.com Copyright Peregrine Semiconductor Corp. 2003 Page 3 of 5 PE84140 Product Specification Figure 5. Package Drawing 8-lead MSOP TOP VIEW 0.65BSC .525BSC 8 7 6 12o REF 5 R 0.90 MIN 2.45±0.10 2X R 0.90 MIN GAGE PLANE 3.00±0.10 0.25 0o 6o 12o REF 0.55 ±0.15 0.51±0.13 -B- 0.51±0.13 1 2 3 4 0.95 BSC .25 A B C -C- 2.95±0.10 0.86±0.08 2.95±0.10 1.10 MAX -A0.10 A 0.33+0.07 -0.08 0.08 A B C 3.00±0.10 4.90±0.15 0.10±0.05 3.00±0.10 FRONT VIEW SIDE VIEW Table 4. Ordering Information Order Code Part Marking Description PE84140-08MSOP-50A Package 84140-01 84140 84140-02 84140 PE84140-08MSOP-2000C 8-lead MSOP 2000 units / T&R 84140-00 PE84140-EK PE84140-08MSOP-EK Evaluation Kit 1 / Box Copyright Peregrine Semiconductor Corp. 2003 Page 4 of 5 8-lead MSOP Shipping Method File No. 70/0127~00A 50 units / Tube | UTSi CMOS RFIC SOLUTIONS PE84140 Product Specification Sales Offices United States Japan Peregrine Semiconductor Corp. Peregrine Semiconductor K.K. 6175 Nancy Ridge Drive San Diego, CA 92121 Tel 1-858-455-0660 Fax 1-858-455-0770 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: 03-3507-5755 Fax: 03-3507-5601 Europe Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel 33-1-47-41-91-73 Fax 33-1-47-41-91-73 For a list of representatives in your area, please refer to our Web site at: http://www.peregrine-semi.com Data Sheet Identification Advance Information The information in this data sheet is believed to be reliable. However, The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising Product Specification out of the use of its products in such applications. The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a PCN (Product Change Notice). Peregrine products are protected under one or more of the following U.S. patents: 6,090,648; 6,057,555; 5,973,382; 5,973,363; 5,930,638; 5,920,233; 5,895,957; 5,883,396; 5,864,162; 5,863,823; 5,861,336; 5,663,570; 5,610,790; 5,600,169; 5,596,205; 5,572,040; 5,492,857; 5,416,043. Other patents are pending. Peregrine, the Peregrine logotype, Peregrine Semiconductor Corp., and UTSi are registered trademarks of Peregrine Semiconductor Corporation. Copyright © 2003 Peregrine Semiconductor Corp. All rights reserved. PEREGRINE SEMICONDUCTOR CORP. | http://www.peregrine-semi.com Copyright Peregrine Semiconductor Corp. 2003 Page 5 of 5