PRELIMINARY PLL650-08 Network LAN Clock Source FEATURES • • Full CMOS output swing with 40-mA output drive capability. 25-mA output drive at TTL level. Advanced, low power, sub-micron CMOS processes. 25MHz fundamental crystal or clock input. 1 output fixed at 100MHz , 1 output fixed at 125MHz . Zero PPM synthesis error in all clocks. Ideal for Network switches. 3.3V operation. Available in 8-Pin 150mil SOIC. XIN 1 XOUT 2 GND 3 VDD 4 PLL 650-08 • • • • • • PIN CONFIGURATION 8 VDD 7 100MHz 6 GND 5 125MHz DESCRIPTIONS The PLL 650-08 is a low cost, low jitter, and high performance clock synthesizer. With PhaseLink’s proprietary analog Phase Locked Loop techniques, the chip accepts 25MHz crystal, and produces multiple output clocks for networking chips, and ASICs. BLOCK DIAGRAM 100MHz XIN XOUT XTAL OSC Control Logic 125MHz 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 Rev 07/15/02 Page 1 PRELIMINARY PLL650-08 Network LAN Clock Source PIN DESCRIPTIONS Name Number Type Description XIN 1 I 25MHz fundamental crystal input (20pF C L parallel resonant). C L have been integrated into the chip. No external C L capacitor is required. XOUT 2 O Crystal connection pin. 125MHz 5 O 125MHz output. 100MHz 7 O 100MHz output. VDD 4,8 P 3.3V power supply GND 3,6 P Ground. 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 Rev 07/15/02 Page 2 PRELIMINARY PLL650-08 Network LAN Clock Source Electrical Specifications 1. Absolute Maximum Ratings PARAMETERS SYMBOL MIN. MAX. UNITS V CC - 0.5 7 V Input Voltage Range VI - 0.5 V CC + 0.5 V Output Voltage Range VO - 0.5 V CC + 0.5 V 260 °C -65 150 °C 0 70 °C Supply Voltage Range Soldering Temperature Storage Temperature TS Ambient Operating Temperature Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. 2. AC Specification PARAMETERS CONDITIONS MIN. TYP. MAX. UNITS 10 25 27 MHz Input Frequency Output Rise Time 0.8V to 2.0V with no load 1.5 ns Output Fall Time 2.0V to 0.8V with no load 1.5 ns Duty Cycle At VDD/2 55 % Max. Absolute Jitter Short term Max. Jitter, cycle to cycle 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 45 50 ±150 ps 80 ps Rev 07/15/02 Page 3 PRELIMINARY PLL650-08 Network LAN Clock Source 3. DC Specification PARAMETERS SYMBOL CONDITIONS MIN. TYP. Operating Voltage VDD 3.13 Input High Voltage V IH VDD/2 Input Low Voltage V IL VDD/2 Input High Voltage V IH For all normal input Input Low Voltage V IL For all normal input Output High Voltage V OH I OH = -25mA Output Low Voltage V OL I OL = 25mA Output High Voltage At CMOS Level V OH I OH = -8mA Operating Supply Current I DD No Load Short-circuit Current IS Nominal output current* I out CMOS output level Nominal output current* I out TTL output level MAX. UNITS 3.47 V V VDD/2 - 1 2 V V 0.8 2.4 V V 0.4 VDD-0.4 V V 35 mA ±100 mA 35 40 mA 20 25 mA 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 Rev 07/15/02 Page 4 PRELIMINARY PLL650-08 Network LAN Clock Source PACKAGE INFORMATION 8 PIN Narrow SOIC ( mm ) SOIC E Symbol Min. Max. A 1.35 1.75 A1 0.10 0.25 B 0.33 0.51 C 0.19 0.25 D 9.80 10.00 E 3.80 4.00 H 5.80 6.20 L 0.40 e 1.27 1.27 BSC H D A A1 C e B L ORDERING INFORMATION For part ordering, please contact our Sales Department: 47745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991 PART NUMBER The order number for this device is a combination of the following: Device number, Package type and Operating temperature range PLL650-08 S C PART NUMBER TEMPERATURATURE C=COMMERCIAL M=MILITARY I=INDUSTRAL PACKAGE TYPE S=SOIC PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation. 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 Re v 07/15/02 Page 5