Subassembly Single Phase AC Controller Subassemblies PSW1C206 IRMS = 230 A VRRM= 800-1800 V Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 1900 VRRM VDRM (V) 800 1200 1400 1600 1800 Type PSW1C 206/08 PSW1C 206/12 PSW1C 206/14 PSW1C 206/16 PSW1C 206/18 Symbol Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C; 50-400 Hz (per single controller) 230 A 180 A 105 A ∫ i dt 2 (di/dt)cr Maximum Ratings TC = 85 °C; 180° sine TVJ = 45 °C t = 10 ms (50 Hz), sine 2250 A VR = 0 t = 8.3 ms (60 Hz), sine 2400 A TVJ = 125 °C t = 10 ms (50 Hz), sine 2000 A VR = 0 t = 8.3 ms (60 Hz), sine 2150 A TVJ = 45 °C t = 10 ms (50 Hz), sine 25300 A²s VR = 0 t = 8.3 ms (60 Hz), sine 23900 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 20000 A²s VR = 0 19100 A²s 150 A/µs t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 250 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.45 A non repetitive,IT = ITAVM 500 A/µs diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM PGM 1000 V/µs TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W Features • • • Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • Solid state relays Advantages • • • • Space and weight savings Improved temperature and power cycling capability High power density Small and light weight RGK= ∞, method 1 (linear voltage rise) PGAVM VRGM TVJ TVJM Tstg Weight tP=300µs 0.5 typ. W 10 V -40... + 125 125 °C °C -40... + 125 18 °C g Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 Subassembly Symbol Test Conditions Characteristic Value ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ 5 mA IT = 300 A, ≤ 1.5 V 0.8 V TVJ = 25 °C For power-loss calculations only 2.4 mΩ TVJ= 25°C ≤ 1.5 V TVJ=-40°C ≤ 1.6 V TVJ= 25°C ≤ 150 mA TVJ=-40°C ≤ 200 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs 0.26 0.13 50 K/W K/W m/s² VD=6V IGT VD=6V VGD IGD IL TVJ= 25°C, tP=10µs IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs RthJC a per thyristor; DC per module Max. allowable acceleration Package style and outline 2 5 ,8 Dimensions in mm (1mm = 0.0394“) 2 0 ,3 2 5 ,8 32 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20