05238 EM6D-100L Only One Name Means ProTek’Tion™ EMI FILTER/TVS ARRAY APPLICATIONS ✔ Cellular Phones ✔ Color LCD Display Panel ✔ Notebooks ✔ Personal Digital Assistant (PDA) ✔ Ground Positioning System (GPS) ✔ SMART Cards IEC COMPATIBILITY (EN61000-4) DFN-12 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ EMI Filtering/TVS Low Pass Filters ✔ > 25db Attenuation from 800MHz to 3GHz ✔ Protects Up to Six(6) Data Lines ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ DFN-12 Package ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION For Each Line I/On 1 2 3 4 5 6 8 7 100 Ohm I/On GND 10pF 10pF GND 12 11 10 9 BOTTOM VIEW Note: I/O connected from pins 1-12, 2-11, 3-10, 4-9, 5-8 and 6-7. 05238.R3 1/06 1 www.protekdevices.com EM6D-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -40°C to 85°C °C TSTG -55°C to 150°C °C DC Power Per Resistor P 400 mW Typical Resistance @ ± 20% R 100 OHMS Soldering Temperature for 10 seconds TL 265°C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER EM6D-100L DEVICE MARKING M6D 10L RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CUT-OFF FREQUENCY CAPACITANCE PER LINE (50 OHMS I/O) (See Note 1) ZERO BIAS VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fc MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 150 20 Note 1: 32pF @ 0V, 1MHz, ±20% tolerance. FIGURE 1 INSERTION LOSS 0 -5 Gain (dB) -10 2.5 Volts -15 -20 -25 0 Volts -30 -35 0.1 1 10 100 1000 10000 Frequency (MHz) 05238.R3 1/06 2 www.protekdevices.com EM6D-100L GRAPHS FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Normalized Resistance 1.100 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature °C 60 80 100 FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) 1.6 Cj - Capacitance (Normalized) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05238.R3 1/06 3 www.protekdevices.com EM6D-100L PACKAGE OUTLINE & DIMENSIONS PACKAGE DIMENSIONS PACKAGE OUTLINE MILLIMETERS D E Pin 1 Reference TOP VIEW A3 A3 L MAX MIN A A1 A3 b D E E2 E3 E4 e L 0.77 0.00 0.178 0.20 2.95 1.35 0.30 1.98 2.08 0.46 0.20 0.84 0.05 0.228 0.30 3.10 1.45 0.40 2.24 2.34 0.56 0.28 0.030 0.00 0.007 0.008 0.116 0.053 0.012 0.078 0.082 0.018 0.008 MAX 0.033 0.002 0.009 0.012 0.122 0.057 0.016 0.088 0.092 0.022 0.011 A1 TAPE & REEL ORDERING NOMENCLATURE e 1 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reel - 5,000 pieces per 8mm tape, i.e., EM6D-100L-T7. 3. Suffix-T13 = 13 Inch Reel - 15,000 pieces per 8mm tape, i.e., EM6D-100L-T13. 4. Suffix- LF = Lead-Free, Pure Tin Plating, i.e., EM6D-100L-LF-T7. 6 E3 E4 12 E2 7 b MIN NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. A SIDE VIEW INCHES DIM BOTTOM VIEW Outline & Dimensions: Rev 1 - 9/05, 06058 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”)/330mm(13”) 8mm A0 B0 K0 D E F W P0 P2 P 1.60± 0.10 3.25± 0.10 0.95 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05238.R3 1/06 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com