PROTEC PA2536DN-T7

95060
ANALOG PRODUCTS DIVISION
PA2535/2536
0.35Ω Dual SPDT Analog Switch
Features






Description
Low Voltage Operation
Low On-Resistance Ron = 0.35Ω @ 2.7 V
−69 dB OIRR @ 2.7 V, 100 kHz
DFN-10 Package
ESD Protection >2000 V
Latch-Up Current >300 mA (JESD 78)
The PA2535/PA2536 are 0.35Ω dual SPDT analog switches
designed for low voltage applications.
The PA2535/PA2536 has on-resistance matching (less than
0.05Ω @ 2.7 V) and flatness (less than 0.2Ω @ 2.7 V) that is
guaranteed, over the entire voltage range. Additionally, low
logic thresholds make the PA2535/PA2536 an ideal interface
to low voltage DSP control signals.
Benefits





Reduced Power Consumption
High Accuracy
Reduce Board Space
1.8-V Logic Compatible
High Bandwidth
The PA2535/PA2536 has fast switching speed with breakbefore-make guaranteed. In the On condition, all switching
elements conduct equally in both directions. Off-isolation and
crosstalk is −69 dB @ 100 kHz.
The PA2535/PA2536 is built on ProTek Analog's highdensity low voltage CMOS process. An epitaxial layer is built in
to prevent latchup.
Applications


The PA2535/PA2536 contains the additional benefit of
2,000 Volt ESD protections.
Cellular Phones
Speaker Headset Switching Audio and
Video Signal Routing
PCMCIA Cards
Battery Operated Systems
Relay Replacement
USB1.1




In a space saving DFN-10 lead (Pb)-free package, the
PA2535/PA2536 are high performance, low Ron switches for
battery powered applications.
No lead (Pb) is used in the manufacturing process either
inside the device/package or on the external terminations.
As a committed partner to the community and the
environment, ProTek Analog manufactures this product with
the lead (Pb)-free device terminations.
PA2535
V+
10
1
NO1
For analog switching products manufactured in DFN
packages, the lead (Pb)-free "LF" suffix is being used as a
designator. Lead (Pb)-free DFN products purchased at any
time will have either a nickel-palladium-gold device termination
or a 100% matte tin device termination.
COM2
IN2
COM1
IN1
NC1
NO2
NC2
5
6
GND
10
NC2
The different lead (Pb)-free materials are interchangeable and
meet all JEDEC standards for reflow and MSL rating.
PA2536
1
V+
NC1
COM2
COM1
IN2
IN1
NO2
NO1
5
6
GND
Ordering Information
Truth Table
Logic
NC1 and NC2
NO1 and NO2
0
ON
OFF
1
OFF
ON
Temp Range Package
-40 to +80°C
DFN-10
Part Number
PA2535DN-T7 PA2535DN-T13
PA2536DN-T7 PA2536DN-T13
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
1
ANALOG PRODUCTS DIVISION
Absolute Maximum Ratings
Reference to Ground
V+……………………………………………….-0.3 to +6.0V
IN, COM, NC, NO…………………….....-0.3 to (V+ +0.3V)
Continuous Current (NO, NC, COM)………….…...300mA
PA2535/2536
0.35Ω Dual SPDT Analog Switch
Peak Current………………………………………….500mA
(Pulsed at 1mS, 10% Duty Cycle)
Storage Temperature (D Suffix)………………-65 to 150°C
ESD per Method 3015.7………………………………> 2KV
Power Dissipation……………………………1191mWATT
NOTES
a. Signals on NC, NO, COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered to PC Board.
c. Derate 4.0 mW/°C above 70 °C
d. Derate 14.9 mW/°C above 70 °C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability
.
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
2
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
Specification V+ = 3.0V Test Conditions unless otherwise specified:
Parameter
Symbol
V+ = 3.0V±10%, VIN = 0.4 V or 2.0V
Test Conditions
Temp
Min
Typ
Max
Unit
VCC
V
Analog Switch
Full
VNO,VNC,
VCOM
Analog Signal Range
On-Resistance
Room
Full
RON
RON Matching
∆RON
RON Flatness
RON(FLAT)
IOFF(NO) or
IOFF(NC)
Switch Off Leakage
Current
ICOM(OFF)
Channel On
Leakage Current
ICOM(ON)
0.0
0.35
VCC = 2.7V, VCOM = 0.9V- 1.5V
INO , INC = 50mA,
0.05
0.09
V+ = 3.3 V,
VNO, VNC= 1.0 V/3.0 V, VCOM = 3.0 V/1.0 V
V+ = 3.3 V, VNO, VNC = VCOM = 1.0V/3.0 V
0.5
0.6
Ω
0.2
Room
Full
-1
-10
-1
-10
Room
Full
-1
-10
-1
-10
Room
Full
-1
-10
-1
-10
2.0
nA
Digital Control
Input High Voltage
VINH
Full
Input Low Voltage
VINL
Full
Input Capacitance
Cin
Full
Input Current
IINL or IINH
VIN = 0 or V+
Full
0.5
10
1
V
pF
1
µA
Dynamic Characteristics
Turn On Time
tON
Turn Off Time
tOFF
Break Before Make
Time
tBBM
Charge Injection
QINJ
Off Isolation
OIRR
Crosstalk
XTALK
NO, NC OFF
Capacitance
CNO(off)
CNC(off)
Chanel On
Capacitance
CON
VNO or VNC = 2.0 V, RL = 300 , CL = 35 pF
Room
Full
52
82
90
Room
Full
43
73
78
Room
Full
CL = 1 nF, VGEN = 0 V, RGEN = 0 
1
Room
pC
-69
RL = 50 , CL = 5 pF, f = 1 MHz
dB
Room
-69
Room
VIN = 0 or V+, f = 1 MHz
6
21
Room
nS
145
pF
Room
406
Power Supply
Supply Range
V+
1.8
5.5
V
1.0
µA
VIN = 0 or V+
Supply Current
I+
0.01
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
3
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
TYPICAL CHARACTERISTICS (25 °C UNLESS NOTED)
rON vs. VCOMand Supply Voltage
rON vs. Analog Voltage and Temperature (NC1)
0.7
0.8
T = 25C
0.5
V+ = 2.0 V
0.4
V+ = 2.7 V
V+ = 3.0 V
0.3
V+ = 3.3 V
0.2
0.1
0.0
0.0
V+ = 3.0 V
IS = 100 mA
0.7
IA = 100 mA
V+ = 1.8 V
r ON – On-Resistance (Ω )
r ON – On-Resistance (Ω )
0.6
0.6
0.5
85C
−40C
0.4
25C
0.3
0.2
0.1
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.0
0.0
4.0
0.5
1.0
VCOM− Analog Voltage (V)
2.5
3.0
100 mA
10 mA
V+ = 3.0 V
VIN = 0 V
I+ – Supply Current (A)
I+ – Supply Current (nA)
2.0
Supply Current vs. Input Switching Frequency
Supply Current vs. Temperature
100000
10000
1.5
VCOM− Analog Voltage (V)
1000
100
V+ = 3 V
1 mA
100 A
10 A
1 A
100 nA
10 nA
10
1 nA
10
100
1K
Temperature ( C)
100 K
1M
10 M
Input Switching Frequency (Hz)
Leakage Current vs. Temperature
Leakage vs. Analog Voltage
10000
300
250
V+ = 3.0 V
INO(off) , INC(off)
ICOM(on)
150
Leakage Current (pA)
100
V+ = 3.0 V
200
ICOM(on)
ICOM(off)
1000
Leakage Current (pA)
10 K
INO(off) , INC(off)
50
0
−50
−100
ICOM(off)
−200
−250
1
−60
−40
−20
0
20
40
Temperature (ºc)
60
80
100
−300
0.0
0.5
1.0
1.5
2.0
Analog Voltage (V)
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
2.5
3.0
4
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
Insertion Loss, Off-Isolation
Crosstalk vs. Frequency
Switching Time vs. Temperature
100
10
tON V+ = 2 V
80
−10
Loss, OIRR, X TALK (dB)
t ON / t OFF – Switching Time (ns)
90
70
60
tON V+ = 3 V
50
tOFF V+ = 3 V
40
30
tOFF V+ = 2 V
Loss
OIRR
−30
−50
V+ = 3.0 V
RL= 50
−70
20
10
0
−60
−90
−40
−20
0
20
40
60
80
100
1M
100 K
10 M
Switching Threshold vs. Supply Voltage
300
250
1.75
200
Q – Charge Injection (pC)
– Switching Threshold (V)
1G
Charge Injection vs. Analog Voltage
2.00
1.50
1.25
1.00
0.75
0.50
150
100
50
0
V+ = 2.0 V
V+ = 3.0 V
−50
−100
−150
−200
0.25
0.00
0
100 M
Frequency (Hz)
Temperature ( C)
−250
1
2
3
4
5
6
−300
0.0
V+ − Supply Voltage (V)
0.5
1.0
1.5
2.0
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
2.5
3.0
VCOM− Analog Voltage (V)
5
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
Test Circuits
V+
+3V
Logic
Input
V+
NO or NC
Switch
Input
0V
Switch Output
COM
VOUT
RL
300
GND
0.9 x VOUT
Switch
Output
IN
Logic
Input
tr < 5 ns
tf < 5 ns
50%
CL
35 pF
0V
tON
0V
Logic "1" = Switch On
Logic input waveforms inverted for switches that have
the opposite logic sense.
CL (includes fixture and stray capacitance)
VOUT = VCOM
tOFF
RL
R L + R ON
Figure 1. Switching Time
V+
Logic
Input
V+
tr <5 ns
tf <5 ns
0V
COM
NO
VNO
3V
VO
NC
VNC
RL
300
IN
CL
35 pF
VNC = VNO
Switch
Output
GND
90%
VO
0V
tD
tD
CL (includes fixture and stray capacitance)
Figure 2. Break-Before-Make Interval
V+
Rgen
+
COM
IN
Vgen
VOUT
V+
NC or NO
VOUT
CL
3V
VOUT
IN
On
Off
On
GND
Q = VOUT x CL
IN depends on switch configuration: input polarity
determined by sense of switch.
Figure 3. Charge Injection
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
6
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
V+
10 nF
V+
COM
IN
COM
0V, 2.4 V
NC or NO
RL
VNC/ NO
Off Isolation = 20 log V
COM
GND
Analyzer
Figure 4. Off-Isolation
V+
10 nF
V+
COM
Meter
0 V, 2.4 V
IN
NC or NO
GND
HP4192A
Impedance
Analyzer
or Equivalent
f = 1 MHz
Figure 5. Channel Off/On Capacitance
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
7
PA2535/2536
0.35Ω Dual SPDT Analog Switch
ANALOG PRODUCTS DIVISION
Package Outline and Dimensions DFN-10
Dim
L1
p
P1
P1
P2
P3
L1
L2
L3
p
G1
G2
L2
G2
P2
MILLIMETERS
MIN
TYP
MAX
2.95
3.00
3.05
2.95
3.00
3.05
0.80
0.85
0.85
0.23
0.25
0.27
0.35
0.40
0.45
0.02
0.02
0.02
0.50
0.50
0.50
2.35
2.40
2.45
1.65
1.75
1.75
G1
TOP VIEW
BOTTOM VIEW
0.30mm
L3 P3
0.50mm
0.60mm
SIDE VIEW
1.85mm
2.74mm
2.60mm
Recommended Land Pattern
Tape and Reel Specifications
Reel Dia
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
178 (7”)
3.00±0.10
3.00±0.10
1.13±0.10
1.50±0.10
1.75±0.10
5.50±0.05
12.00±0.30
4.00±0.10
2.00±0.05
8.00±0.10
0.25
330(13”)
3.00±0.10
3.00±0.10
1.13±0.10
1.50±0.10
1.75±0.10
5.50±0.05
12.00±0.30
4.00±0.10
2.00±0.05
8.00±0.10
0.25
t
P0
P2
D
10 Pitches Cumulative
Tolerance on Tape± 0.2
E
Pin 1
indicated
by Dot
Top cover tape
A0
B0
W
PA
2535
DN
PA
2535
DN
K0
F
P
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
8
ANALOG PRODUCTS DIVISION
PA2535/2536
0.35Ω Dual SPDT Analog Switch
Typical Application
VDD
NC1
RS232
Transceiver
COM1
NO1
Digital
Base Band
IN1
NC2
USB
USB
Transceiver
COM2
Connector
UART
NO2
IN2
DUAL SPDT
Sharing of Interfaces
GND
Life Support Policy
PROTEK ANALOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF
PROTEK DEVICES.
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 414--5141
www.protekanalog.com
95060 Rev.2. 10/10
NOT FOR USE IN LIFE SUPPORT SYSTEMS
9