5-1-1 Unicolor lamps ■5mm Pitch Lead 3φ Lens LEDs SEL5021 Series (available as Direct Mount) Forward Voltage Part Number Emitting Color SEL5221S SEL5821A SEL5921A SEL5721C SEL5421E SEL5521C Red Amber Orange Yellow Green Pure green Transparent red Transparent orange Transparent orange Water clear Transparent green Water clear TYP 1.9 1.9 1.9 2.0 2.0 2.0 Luminous Intensity Peak Wavelength Conditions IF (mA) VF (V) Lens Color MAX 2.5 2.5 2.5 2.5 2.5 2.5 10 10 10 10 10 10 Iv Conditions (mcd) IF (mA) TYP 35 20 60 20 60 20 90 20 95 20 35 20 λP (nm) TYP 630 610 587 570 560 555 Conditions IF (mA) 10 10 10 10 10 10 Dominant Wavelength Spectrum Half Bandwidth λd Conditions (nm) IF (mA) TYP 620 10 605 10 590 10 571 10 567 10 559 10 ∆λ (nm) TYP 35 35 33 30 20 20 10 10 10 10 10 10 GaAsP GaAsP GaAsP GaP GaP GaP External Dimensions Directional Characteristics (representative example) Chip Material Conditions IF (mA) (Unit: mm) Cathode mark Resin burr 0.3max Resin heap 0.8max Dimensional Tolerance: ±0.3 0° 30° 30° 5.8±0.5 0° 30° 30° 3.9 6.0±0.2 3.2±0.2 ø3.0 ±0.2 0 50 90° 100% 90° 100% 60° 50 0 50 90° 100% (5.0) 1.4 0.5±0.1 Cathode 50 60° 3.6 90° 100% 60° 1.0min 60° 23.0min 0.65max 0.5+0.1 6.2 Product Mass: Approx. 0.23 g 242 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs