5-1-4 Bicolor surface mount ■3.0 × 2.5 Surface Mount LEDs with Two Elements (Inner Lens Type) SEC2004 Series Part Number SEC2764C SEC2484C SEC2494C SEC2774C SEC2554C Emitting Color A: High luminosity red B: Yellow A: Amber B: Green A: Orange B: Green A: Yellow B: Yellow A: Pure green B: Pure green Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.7 2.2 10 50 20 660 10 642 10 30 10 2.0 2.5 10 50 20 570 10 571 10 30 10 1.9 2.5 10 20 20 610 10 605 10 35 10 2.0 2.5 10 30 20 560 10 567 10 20 10 1.9 2.5 10 20 20 587 10 590 10 33 10 2.0 2.5 10 30 20 560 10 567 10 20 10 2.0 2.5 10 50 20 570 10 571 10 30 10 2.0 2.5 10 50 20 570 10 571 10 30 10 2.0 2.5 10 10 20 555 10 559 10 20 10 2.0 2.5 10 10 20 555 10 559 10 20 10 Lens Color Water clear Water clear Water clear Water clear Water clear External Dimensions Directional Characteristics (representative example) Chip Material GaAlAs GaP GaAsP GaP GaAsP GaP GaP GaP GaP GaP (Unit: mm) Dimensional Tolerance: ±0.3 0° 30° 1.4±0.1 Cathode (0.5) 0.9 0.6±0.1 mark Cathode 0.9 1.0 1.5 60° 2.0 60° 3.0 1.0 30° 2.5 1.5 Anode Lens 0.8 Resin P.C.B. 1.8 90° 100% 50 0 50 90° 100% Internal Circuit Drawing B A Product Mass: Approx. 0.013 g 256 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs