5-1-3 Unicolor surface mount ■1.6 × 0.8 Miniature Surface Mount LEDs SEC1005 Series Part Number SECU1605C-S SECU1205C-S SECU1805C-S SECU1905C-S * SECK1D05C-S SECT1D05C-S SECS1L05C-S SECK1L05C-S * SECT1E05C-S * SECK1E05C-S Emitting Color Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP Lens Color Deep red Red Amber Orange Green Pure green Aqua blue Aqua blue Blue Blue Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear 1.9 1.9 1.9 1.9 3.8 3.3 3.1 3.5 3.3 3.6 2.5 2.5 2.5 2.5 4.3 3.8 3.6 4.1 3.8 4.0 10 10 10 10 10 10 10 10 10 10 25 45 50 40 45 180 50 20 40 10 10 10 10 10 10 10 10 10 10 10 650 635 615 591 514 520 486 488 460 470 10 10 10 10 10 10 10 10 10 10 639 625 607 589 520 526 490 490 466 472 10 10 10 10 10 10 10 10 10 10 20 20 17 15 40 35 45 30 25 30 10 10 10 10 10 10 10 10 10 10 Chip Material AlGaInP AlGaInP AlGaInP AlGaInP GaN on Si InGaN InGaN GaN on Si InGaN GaN on Si *Mass production in preparation External Dimensions Directional Characteristics (representative example) (Unit: mm) Dimensional Tolerance: ±0.3 InGaN 0 -30 0 30 -60 -30 60 30 -60 60 0.55 0.35 (0.2) AlGaInP 0 -90 1.0 0.5 0 -30 -30 60 0.5 0 0 90 1.0 0.5 0.5 P.C.B. -90 1.0 Anode 30 -60 90 1.0 Cathode mark Resin 0 30 -60 -90 1.0 90 1.0 0.5 Cathode 1.2 1.0 0.5 1.6 -90 1.0 0.7 0.3 0.8 60 0.5 0 0.5 90 1.0 Product Mass: Approx. 0.001 g LEDs 249 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs