5-1-3 Unicolor surface mount ■1.6 × 0.8 Miniature Surface Mount LEDs SEC1007 Series Part Number Emitting Color SECS1B07C Light amber Yellow * SECU1707C Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 45 10 600 10 596 10 15 10 2.2 2.5 10 15 10 572 10 571 10 15 10 Lens Color Water clear Water clear Chip Material AlGaInP AlGaInP *Mass production in preparation External Dimensions Directional Characteristics (representative example) (Unit: mm) Dimensional Tolerance: ±0.3 InGaN 0 -30 0 30 -60 -30 60 30 -60 60 0.7 ±0.1 0.5 0.8 90 1.0 0.5 -90 1.0 0.5 0 90 1.0 0.5 0.3 0 AlGaInP 0 -30 -60 -90 1.0 -30 60 0.5 0 0.5 -90 1.0 P.C.B. 30 -60 90 1.0 Cathode Cathode mark Resin 0 30 0.7 1.2 1.0 0.5 1.6 -90 1.0 (0.2) Anode 60 0.5 0 0.5 90 1.0 Product Mass: Approx. 0.013 g 250 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs