5-1-3 Unicolor surface mount ■3.0 × 1.5 Surface Mount LEDs (Inner Lens Type) SEC1003 Series Part Number SEC1603C SEC1203C SEC1803C SEC1903C SEC1703C SEC1403C SEC1403E-TG SEC1503C SECU1703C SECU1403C-S SECU1403C-TG SECS1203C SECS1803C SECS1903C Lens Color Emitting Color High luminosity red Red Amber Orange Yellow Green Deep green Pure green Yellow High Green luminosity Green Red Ultrahigh luminosity Amber Orange Water clear Water clear Water clear Water clear Water clear Water clear Transparent green Water clear Water clear Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.7 2.2 10 35 20 660 10 642 10 30 10 1.9 2.5 10 15 20 630 10 620 10 35 10 1.9 2.5 10 20 20 610 10 605 10 35 10 1.9 2.5 10 15 20 587 10 590 10 33 10 2.0 2.5 10 35 20 570 10 571 10 30 10 2.0 2.5 10 33 20 560 10 567 10 20 10 2.0 2.5 10 15 20 558 10 564 10 20 10 2.0 2.5 10 10 20 555 10 559 10 20 10 2.1 2.5 20 70 20 572 20 571 20 15 20 2.1 2.5 20 40 20 562 20 562 20 12 20 2.1 2.5 20 75 20 564 20 564 20 12 20 1.9 2.5 20 100 20 635 20 625 20 15 20 1.9 2.5 3 10 3 615 3 607 20 15 3 1.9 2.5 20 70 20 590 20 590 20 15 20 External Dimensions Directional Characteristics (representative example) Chip Material GaAlAs GaAsP GaAsP GaAsP GaP GaP GaP GaP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP (Unit: mm) Dimensional Tolerance: ±0.3 0° 30° 90° 100% Cathode mark 1.4 0.9 50 0 50 90° 100% Cathode (0.5) 1.3 1.6 1.7 Lens ø1.0 2.0 60° 3.0 60° 1.5 0.6 30° Resin P.C.B. Anode Product Mass: Approx. 0.008 g 254 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs