QUAD COMPLIMENTARY TRANSISTORS MHQ6002 • High Speed Saturated Switching • Hermetic Ceramic Dual In Line Package. • Ideally suited for High Speed Switching and General Purpose Applications • Screening Options Available ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD TJ Tstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Continuous Collector Current TA = 25°C Total Power Dissipation at Derate Above 25°C Junction Temperature Range Storage Temperature Range Per Device Total Package 60V 30V 5V 500mA 650mW 1.9W 3.71mW/°C 10.86mW/°C -65 to +200°C -65 to +200°C THERMAL PROPERTIES (Each Device) Symbol Parameters Max. Units RθJA Thermal Resistance, Junction To Ambient 269.2 °C/W Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: [email protected] Website: http://www.semelab-tt.com Document Number 9205 Issue 1 Page 1 of 3 QUAD COMPLIMENTARY TRANSISTORS MHQ6002 ELECTRICAL CHARACTERISTICS (Each Device, TA = 25°C unless otherwise stated) Symbols Parameters Test Conditions IC = 10mA IB = 0 30 IC = 10µA IE = 0 60 V(BR)EBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage IE = 10µA IC = 0 5 ICBO Collector Cut-Off Current VCB = 50V IE = 0 20 IEBO Emitter Cut-Off Current VEB = 3V IC = 0 30 IC = 150mA IB = 15mA 0.4 IC = 300mA IB = 30mA 1.4 IC = 150mA IB = 15mA 1.3 IC = 300mA IB = 30mA 2 IC = 1.0mA VCE = 10V 25 IC = 10mA VCE = 10V 35 IC = 150mA VCE = 10V 40 IC = 300mA VCE = 10V 20 IC = 50mA VCE = 20V (1) V(BR)CEO V(BR)CBO (1) VCE(sat) VBE(sat) hFE (1) (1) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Forward-current transfer ratio Min. Typ Max. Units V nA V DYNAMIC CHARACTERISTICS fT Transition Frequency Cobo Output Capacitance VCB = -10V IE = 0 f = 1.0MHz Cibo Input Capacitance ton Turn-On Time toff 300 MHz f = 100MHz VEB = -2V IC = 0 f = 1.0MHz Turn-Off Time IC = -150mA VCC = -30V IB1 = -15mA IC = -150mA VCC = -30V IB1 = - IB2 = -15mA NPN 6 PNP 4.5 NPN 20 PNP 17 pF 30 ns 225 Notes (1) Pulse Width ≤ 300us, δ ≤ 2% Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: [email protected] Website: http://www.semelab-tt.com Document Number 9205 Issue 1 Page 2 of 3 QUAD COMPLIMENTARY TRANSISTORS MHQ6002 MECHANICAL DATA Dimensions in inches 14 1 NPN PNP 13 12 2 3 11 10 9 8 4 5 6 7 Pin 1 Pin 2 Pin 3 - Collector 1 Base 1 Emitter 1 Pin 14 Pin 13 Pin 12 - Collector 4 Base 4 Emitter 4 Pin 4 - No Connection Pin 11 - No Connection Pin 5 Pin 6 Pin 7 - Emitter 2 Base 2 Collector 2 Pin 10 Pin 9 Pin 8 - Emitter 3 Base 3 Collector 3 Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: [email protected] Website: http://www.semelab-tt.com Document Number 9205 Issue 1 Page 3 of 3