Double Balanced Mixer Communications Band Model MC5xSMx-7 Model MC5xSMx-14 RF 3.5 to 15.0 GHz Electrical Specifications: (1) Specifications Conditions RF (GHz) 3.7-14.5 3.7-14.5 3.5-15.0 Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: 3.5-15.0 LO (GHz) 3.7-14.5 3.7-14.5 3.5-15.0 IF (MHz) DC-500 DC-2000 DC-4000 Min 26 dB 21 dB 3.5-15.0 3.5-15.0 Input 1 dB Compression Point: 3.5-15.0 3.5-15.0 DC-2000 DC-4000 DC-4000 Input Third Order Intercept Point: 3.5-15.0 3.5-15.0 DC-4000 LO Power: (4) 3.5-15.0 3.5-15.0 DC-4000 Typical 5.0 dB 5.5 dB 7.5 dB Max 7.0 dB 8.5 dB 9.5 dB 35 dB 30 dB 23 dB +20 dB +14 dB +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +13 dBm +18 dBm Model MC5xSMx-7 Model MC5xSMx-14 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +13 dBm 7 = +18 dBm MC53 MC54 MC56 MC57 MC53 MC54 MC56 MC57 MC53 MC54 MC56 MC57 D = No Cover H = With Cover Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application note M112, for aid in selecting the outline and for mounting and installation information. MC5xSMD-7 MC5xSMH-7 Outline: SMMD3A: AS SHOWN SMMD3B: RF & LO REVERSED MC5xSMx-7: AS SHOWN MC5xSMx-14: RF & LO REVERSED Typical Performance at 25˚C Outline: SMMH3A: AS SHOWN SMMH3B: RF & LO REVERSED All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 Rev. 7/10/07 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001