SSDI SAM50FA_1

SAM50FA
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
0.5 Amp
5000 VOLTS
150 nsec
HIGH VOLTAGE
RECTIFIER
Part Number / Ordering Information 1/
SAM 50
⏐
⏐
⏐
⏐
⏐
⏐
⏐
⏐
⏐
⏐
FA
_ _ __
⏐
⏐
⏐
⏐
⏐
⏐
⏐
L
⏐
⏐
⏐
⏐
L
L Screening
2/
= None
TX = TX Level
TXV = TXV Level
S = S Level
Package
___ = Axial
SMS = Surface Mount Square Tab
Recovery Time
F = Fast Recovery
L Voltage
50 = 5000
FEATURES:
•
•
•
•
•
•
Ultra Fast and Fast Recovery: 150 nsec
Maximum
Hermetically Sealed Surface Mount Package
Void Free Construction
Metallurgically Bonded
175°C Maximum Operating Temperature
TX, TXV, and Space Level Screening Available2/
Maximum Ratings
Symbol
Value
Units
Peak Inverse Voltage
PIV
5000
Volts
Average Rectified Forward Current
25ºC
100ºC
Io
500
300
mA
Maximum Reverse Current
25ºC
100ºC
IR
3.0
15
μA
VF
13
Volts
Maximum Surge Current 1 Cycle
IFSM
25
Amps
Maximum Reverse Recovery Time
trr
150
nsec
CJ
10
pf
RθJL/ RθJE
18
°C/W
Maximum Forward Voltage
@ IF = 500 mA
Maximum Junction Capacitance
(fT = 1MHz @ 100 Volts)
Typical Thermal Impedance (L=3/8”)
1/ For Ordering Information, Price, and Availability – Contact Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Operating and testing over 10,000 V/inch may require encapsulation or
immersion in a suitable dielectric material.
4/ Max. forward voltage measured with instantaneous forward pulse of
300µsec minimum.
5/ Max. lead/end tab temp. for soldering is 250°C, 3/8”from the case for 5 sec
maximum.
6/ Operating and storage temperature: -65°C to +175°C.
7/ Reverse Recovery Test Conditions: IF=.5A, IR=1mA, IRR=.25A, TA=25°C.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
Axial Leaded
DATA SHEET #: RV0033C
SMS
DOC
SAM50FA
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
PACKAGE OUTLINE:
D
Axial
B
DIMENSIONS
D
ØC
ØA
DIM
MIN
MAX
A
---
.300”
B
---
.425”
C
.047”
.05”
D
1.10”
---
Surface Mount Square Tab
DIMENSIONS
DIM
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
MIN
MAX
A
.170”
.205”
B
.290”
.450”
C
.020”
.035”
D
.002”
---
DATA SHEET #: RV0033C
DOC