SDR60U080N thru SDR60U120N and SDR60U080P thru SDR60U120P Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information SDR60 __ __ __ __ │ │ │ │ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ │ │ │ └ │ │ │ │ └ └ 60 AMP Low VF Ultra Fast Recovery Rectifier 1/ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level 800 -1200 Volts 50 nsec Package Type N = TO-258 P = TO-259 Features: • • • • • • • • • • Voltage/Family 080 = 800V 090 = 900V 100 = 1000V 110 = 1100V 120 = 1200V Recovery Time U = Ultra Fast Ultra Fast Recovery: 45 nsec typical High Surge Rating Low Reverse Leakage Current Low Forward Voltage Drop Low Junction Capacitance Hermetically Sealed Package Gold Eutectic Die Attach available Ultrasonic Aluminum Wire Bonds Ceramic Seals for improved hermeticity available TX, TXV, Space Level Screening Available Consult 2/ Factory. Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) SDR60U080 SDR60U090 SDR60U100 SDR60U110 SDR60U120 3/4/ Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Allow Junction to Reach Equilibrium Between Pulses, TA = 25ºC) 3/4/ Operating & Storage Temperature Maximum Thermal Resistance Junction to End Tab3/ Symbol Value Units VRRM Volts VR 800 900 1000 1100 1200 Io 60 Amps IFSM 500 Amps Top & Tstg -65 to +200 ºC RθJE 0.75 ºC/W VRWM TO-258 (N) TO-259 (P) 1/ For ordering information, price, operating curves, and availability - Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Pins 2 & 3 connected. 4/ Limited by wirebonding NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0144A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SDR60U080N thru SDR60U120N and SDR60U080P thru SDR60U120P Electrical Characteristics Instantaneous Forward Voltage Drop (TA = 25ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop (TA = -55ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop (TA = 125ºC, 300 μsec pulse) Symbol IF = 20Adc IF = 50Adc IF = 100Adc IF = 20Adc IF = 50Adc IF = 100Adc IF = 20Adc IF = 50Adc IF = 100Adc Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Typ Max 1.7 1.85 1.98 1.75 1.85 1.98 1.14 1.45 1.7 1.9 2.0 2.5 -2.1 -1.4 1.7 -- IR1 75 500 μA IR2 5 20 50 -150 -- mA CJ 200 175 -300 pF trr1 trr2 trr3 IRM3 trr4 IRM4 45 150 75 5 150 10 50 ------ nsec nsec nsec A nsec A VF1 VF2 VF3 Reverse Leakage Current (Rated VR, TA = 100ºC, 300 μsec pulse minimum) (Rated VR, TA = 125ºC, 300 μsec pulse minimum) (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Junction Capacitance (VR = 5 Vdc, TA = 25ºC, f = 1MHz) (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A) (IF = 500 mA, IR = 1A, IRR = 0.25A) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) Case Outline: TO-258 TA = 25ºC TA = 100ºC TA = 25ºC TA = 25ºC TA = 100ºC TA = 100ºC Units Volts Volts Volts Case Outline: TO-259 Note 1: Pin 2&3 connected together NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0144A DOC