SHF1100SM thru SHF1103SM Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 1 AMP 50–300 Volts 35 nsec HYPER FAST RECTIFIER Part Number / Ordering Information 1/ SHF11 __ SM __ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ 2/ L Screening = None TX = TX Level TXV = TXV Level -S = S Level L Package SM = Surface Mount Round Tab Voltage 00 = 50 V 01 = 100 V 02 = 200 V 03 = 300 V Features: • • • • • • • • Hyper Fast Recovery: 35 nsec Max. PIV to 300 Volts Hermetically Sealed Surface Mount Package Void Free Construction For High Efficiency Applications Single Chip Construction Replaces for UES1104 Types TX, TXV, and S-Level Screening Available2/ Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SHF1100SM SHF1101SM SHF1102SM SHF1103SM Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25ºC) Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to End Tab Symbol Value Units VRRM Volts VR 50 100 200 300 Io 1 Amps IFSM 20 Amps Top & Tstg -65 to +175 ºC RθJE 28 ºC/W VRWM Notes: 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0115C SM DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 1 Adc, TA = 25ºC, 300 µs pulse) Instantaneous Forward Voltage Drop (IF = 5Adc, TA = -55ºC, 300 µs pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µs pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µs pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A, TA = 25ºC) SHF1100SM thru SHF1103SM Symbol Max Units VF 1.35 Vdc VF 1.5 Vdc IR 10 μA IR 1 mA CJ 20 pF trr 35 nsec Case Outline: Surface Mount Round Tab DIMENSIONS DIM A B C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0115C MIN .095” .190” .005” MAX .105” .210” .025” DOC