Solid State Devices, Inc. Designer`s Data Sheet SSR20150CTG thru

SSR20150CTG thru SSR20200CTG
and
SSR20150CTS.5 thru SSR20200CTS.5
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
20 AMP
HERMETIC SURFACE MOUNT
CENTERTAP SCHOTTKY RECTIFIER
Part Number / Ordering Information1/
SSR20 __ __ __ __
│ │ │ └ Screening2/
│ │ │
__ = Not Screened
│ │ │
TX = TX Level
│ │ │
TXV = TXV Level
│ │ │
S = S Level
│ │ └ Package
G = Cerpack
│ │
S.5 = SMD.5
│ │
│ │
│ └ Configuration
CT = Centertap
│
└ Voltage
150 = 150 V
200 = 200 V
150 - 200 VOLTS
FEATURES:
 Extremely small footprint
 Extremely low forward voltage drop
 Low reverse leakage
 Hermetically sealed surface mount package
 Guard ring for overvoltage protection
 175ºC operating junction temperature
 TX, TXV, and S level screening available consult factory
MAXIMUM RATINGS3/
Peak Repetitive Reverse and
DC Blocking Voltage
SSR20150CT
SSR20200CT
Average Rectified Forward Current
(Resistive load, 60 Hz, sine wave, TA = 25ºC, per leg)
Peak Surge Current
(8.3 ms pulse, half sine wave superimposed on IO, allow junction to reach
equilibrium between pulses, TA = 25ºC; per leg)
Operating & Storage Temperature
Maximum Thermal Resistance
(Junction to Case, per leg)
NOTES:
Cerpack
SMD.5
Symbol
Value
Units
VRRM
VRWM
VR
150
200
Volts
IO
10
Amps
IFSM
100
Amps
TOP & Tstg
-65 to +200
RθJC
2
CERPACK (G)
o
o
C
C/W
SMD.5 (S.5)
1/ For ordering information, price, and availability - contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on
request.
3/ Unless otherwise specified, all electrical characteristics @25ºC.
(dime used for size reference)
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0071B
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SSR20150CTG thru SSR20200CTG
and
SSR20150CTS.5 thru SSR20200CTS.5
ELECTRICAL CHARACTERISTICS (per leg)3/
Instantaneous Forward Voltage Drop
(TA=25ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=-55ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=125ºC, 300sec pulse)
Symbol
IF = 1 A
IF = 3 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 3 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 3 A
IF = 5 A
IF = 10 A
VF1
VF2
VF3
VF4
VF5
VF6
VF7
VF8
VF9
VF10
VF11
VF12
Min
-
-
-
Typ
Max
0.64
0.75
0.81
0.91
0.68
0.84
0.91
1.05
0.48
0.59
0.65
0.76
0.7
0.9
1.0
0.55
0.75
0.86
Units
VDC
VDC
VDC
Reverse Leakage Current
(Rated VR, TA = 25ºC, 300sec pulse minimum)
IR1
-
0.4
10
A
Reverse Leakage Current
(Rated VR, TA = 100ºC, 300sec pulse minimum)
IR2
-
0.5
-
mA
Reverse Leakage Current
(Rated VR, TA = 125ºC, 300sec pulse minimum)
IR3
-
0.8
5
mA
CJ
-
185
135
175
pF
Junction Capacitance
(f = 1MHz, TA = 25ºC)
VR = 5V
VR = 10V
Package Outline:
CERPACK
PIN OUT:
PIN 1: ANODE 1
PIN 2: ANODE 2
TAB: CATHODE
Note: For optimal
performance, connect
anode terminals
together.
Bottom View
Package Outline:
SMD.5
PIN OUT:
PIN 1: CATHODE
PIN 2: ANODE 1
PIN 3: ANODE 2
Note: For optimal
performance, connect
anode terminals
together.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0071B
DOC