U830 WF WFU Silicon N-Channel MOSFET Features ■ 4.5A,500V,RDS(on)(Max 1.5Ω)@VGS=10V ■ Ultra-low Gate Charge(Typical 32nC) ■ Fast Switching Capability ■ 100%Avalanche Tested ■ Maximum Junction Temperature Range(150℃) General Description This Power MOSFET is produced using Winsemi ’s advanced planar stripe, DMOS technology. This latest technology has been especially designed to minimize on-state resistance, have a high rugged avalanche characteristics. This devices is specially well suited for high efficiency switch model power supplies, power factor correction and half bridge and full bridge resonant topology line a electronic lamp ballast. Absolute Maximum Ratings Symbol VDSS Parameter Value Units Drain Source Voltage 500 V Continuous Drain Current(@Tc=25℃) 4.5 A Continuous Drain Current(@Tc=100℃) 2.9 A 18 A ±30 V 300 mJ ID IDM Drain Current Pulsed (Note1) VGS Gate to Source Voltage EAS Single Pulsed Avalanche Energy EAR Repetitive Avalanche Energy (Note 1) 7.5 mJ dv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 V/ns 48 W 0.38 W/℃ -55~150 ℃ 300 ℃ (Note 2) Total Power Dissipation(@Tc=25℃) PD Derating Factor above 25℃ TJ, Tstg TL Junction and Storage Temperature Channel Temperature Thermal Characteristics Symbol Parameter Value Min Typ Max Units RQJC Thermal Resistance, Junction-to-Case - - 2.6 ℃/W RQJA Thermal Resistance, Junction-to-Ambient* - - 50 ℃/W RQJA Thermal Resistance, Junction-to-Ambient - - 110 ℃/W *When mounted on the minimum pad size recommended(PCB Mount) Rev.A Nov.2010 Copyright@Winsemi Microelectronics Co., Ltd., All right reserved. U830 WF WFU Electrical Characteristics (Tc = 25°C) Characteristics Symbol Test Condition Min Type Max Unit IGSS VGS = ±30 V, VDS = 0 V - - ±100 nA V(BR)GSS IG = ±10 μA, VDS = 0 V ±30 - - V IDSS VDS = 500 V, VGS = 0 V - - 1 μA Drain−source breakdown voltage V(BR)DSS ID = 250 μA, VGS = 0 V 500 - - V Break Voltage Temperature ΔBVDSS/ ID=250μA, - 0.55 - V/℃ Gate leakage current Gate−source breakdown voltage Drain cut−off current Coefficient ΔTJ Referenced to 25℃ Gate threshold voltage VGS(th) VDS = 10 V, ID =250 μA 2 - 4 V Drain−source ON resistance RDS(ON) VGS = 10 V, ID = 2.25A - 1.16 1.5 Ω Forward Transconductance gfs VDS = 40 V, ID = 2.25A - 4.2 - S Input capacitance Ciss VDS = 25 V, - 800 1050 Reverse transfer capacitance Crss VGS = 0 V, - 18 23 Output capacitance Coss f = 1 MHz - 76 100 VDD =250 V, - 15 40 ton ID =4.5A - 40 90 tf RG=25Ω - 85 180 - 45 100 - 32 44 - 3.7 - - 15 - Rise time Turn−on time tr Switching time pF ns Fall time Turn−off time (Note4,5) toff Total gate charge (gate−source VDD = 400 V, Qg plus gate−drain) VGS = 10 V, nC Gate−source charge Qgs Gate−drain (“miller”) Charge Qgd ID =4.5 A (Note4,5) Source−Drain Ratings and Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Type Max Unit Continuous drain reverse current IDR - - - 4.5 A Pulse drain reverse current IDRP - - - 18 A Forward voltage (diode) VDSF IDR = 4.5 A, VGS = 0 V - - 1.4 V Reverse recovery time trr IDR = 4.5 A, VGS = 0 V, - 305 - ns Reverse recovery charge Qrr dIDR / dt = 100 A / μs - 2.6 - μC Note 1.Repeativity rating :pulse width limited by junction temperature 2.L=24mH,IAS=4.5A,VDD=50V,RG=25Ω,Starting TJ=25℃ 3.ISD≤4.5A,di/dt≤300A/us, VDD<BVDSS,STARTING TJ=25℃ 4.Pulse Test: Pulse Width≤300us,Duty Cycle≤2% 5.Essentially independent of operating temperature. This transistor is an electrostatic sensitive device Please handle with caution 2/7 Steady, keep you advance U830 WF WFU Fig.1 On-State Characteristics Fig.2 Transfer Current characteristics Fig.3 Capacitance Variation vs Fig.4 Breakdown voltage Variation Drain Voltage vs Temperature Fig.5 On-Resistance Variation vs Fig.6 Gate Charge Characteristics Junction Temperature 3/7 Steady, keep you advance U830 WF WFU Fig.7 Maximum Safe Operation Area Fig.8 Maximum Drain Current vs Case Temperature Fig.9Transient Thermal Response Curve 4/7 Steady, keep you advance U830 WF WFU Fig.10 Gate Test Circuit & Waveform Fig.11 Resistive Switching Test Circuit & Waveform Fig.12 Unclamped Inductive Switching Test Circuit & Waveform 5/7 Steady, keep you advance U830 WF WFU Fig.13 Peak Diode Recovery dv/dt Test Circuit & Waveform 6/7 Steady, keep you advance U830 WF WFU 51 Package Dimension TO-2 TO-251 Unit: mm 7/7 Steady, keep you advance