V585ME48-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • CATV Headend • Test Equipment • Downconvertors £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 950 Typ Max Units 2050 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -98 dBc/Hz Harmonic Suppression (2nd) -30 dBc Tuning Voltage 0 15 MHz/V 81 Tuning Sensitivity (avg.) 7 dBm 500 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 3 MHz 85 °C Max Units Power Output 1 Load Impedance 4 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-16HL-SM Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 19 Vdc 23 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V585ME48-LF Voltage-Controlled Oscillator Surface Mount Module Rev B2 Tuning Curve, typ. FREQUENCY (MHz) 2150 2060 1970 1880 1790 1700 1610 1520 1430 1340 1250 1160 1070 980 890 800 85 °C 25 °C -40 °C 0 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 6 4 0.030 MIN. CUTBACK FROM LIVE PADS 2 0 894 1111 1264 1395 1516 1630 1740 1849 1956 2059 2151 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B