Prosafe Trapped Key Interlock Switches Slamlock Mechanical Specifications Single Dual Description The Prosafe Slamlock combines the features of trapped keys with tongue actuated interlocks. When the actuator is inserted into the interlock (guard closed), the trapped key can be rotated and removed. With the key free, the actuator can not be removed thus locking closed the guard door. The trapped key must be re-inserted and rotated 90° to unlock the guard. Standards EN292-1&2, EN1088, IEC/EN60947-51, GS-ET-19, ISO12100-1&2, ISO14119, AS4024.1 Category Cat. 1 per EN 954-1 (ISO 13849-1) Suitable for Cat. 2, 3, or 4 systems Approvals BG, CE marked for all applicable directives, and C-Tick not required Operating Temperature -40°C to +200°C (-40°F to +392°F) Mechanical Operations In excess of 105 operations under normal working conditions. Max Shear Force to Key 15.1kN (3398lbs) Max Torque to Key 14Nm (124lb•in) Humidity 95% RH Weight Single key version Dual key version Code Barrels Tested to 100,000 operations Ambient Working Temp -10°C to +50°C (14°F to +122°F) Material 316L Stainless Steel Mounting SSL Slamlocks are manufactured in 316L stainless steel to provide a rugged, industrial grade method of interlocking guard doors. One advantage of the slamlock is that there is no need to run power wires to the gate. Power is disconnected by a trapped key on a control panel or by a Prosafe RKS type unit and the key is then hand-carried to the gate by the operator. 760gm (0.76kg (1.68lbs)) 1332gm (1.33kg (2.93lbs)) DSS Max Holding Force 2 x M5 Counterbored from Top or 2 x M5 from Underside with Nuts 4 x M5 Counterbored from Top or 4 x M5 from Underside with Nuts 2000N (450lbs) The single key Slamlock (SSL) is used to interlock hatches, guards and doors where full body access is not required. Dual key Slamlock (DSL) is similar to the single key version but has a secondary key to allow ‘2 key in’ or ‘key exchange’ conditions. The key exchange version may be used where whole body access is required, as the secondary key can be used as a personnel key. Features • • • • • • • • 316L stainless steel construction Selection of actuator types available Single or dual key versions available Direct drive operation Replaceable code barrel assembly Fitted with tamper resistant screws Weatherproof stainless steel dust cap as standard Conforms to EN 292, EN 1088, GS ET 19 The Prosafe Advantage Stainless steel construction. 5-24 Prosafe Trapped Key Interlock Switches Slamlock Mechanical Product Selection Type Key Condition Single Key Key Trapped to Release Actuator Actuator Standard Flexible Flat Standard Flexible Flat Standard Flexible Flat Primary Key Trapped, Secondary Key Free to Release Actuator Dual Key Both Keys Free to Release Actuator Catalogue Number 440T-MSSLE10➊ 440T-MSSLE11➊ 440T-MSSLE12➊ 440T-MDSLE10➊➋ 440T-MDSLE11➊➋ 440T-MDSLE12➊➋ 440T-MDSLE20➊➊ 440T-MDSLE22➊➊ 440T-MDSLE23➊➊ ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ➋ Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection. Approximate Dimensions—mm (inches) 38.3 (1.5) 3.5 (0.13) 48 (1.88) 20.8 (0.81) Top Entry Double Key Slamlock 28.5 (1.22) & 30 (1.18) Pitch Range 43.6 (1.71) 64.1 (2.52) 57.7 (2.27) 3.5 (0.13) 4 x M5 48 (1.88) 20.8 (0.81) 2 x M5 28.5 (1.22) & 30 (1.18) Pitch Range 38.3 (1.5) 43.6 (1.71) 64.1 (2.52) Top Entry Front Entry Code Barrel Screws M4 x 8 Torx Head Front Entry 5 (0.19) 34 (1.33) 20.8 (0.81) 25.4 (1.0) 4 (0.15) 4 (0.15) 18 (0.70) 2 Holes, ±5.5 thru 57.7 (2.27) 25 (1.0) 18 (0.70) Secondary 3.5 (0.13) 19 (0.74) Primary 25.4 (1.0) 151 (5.94) Bottom Entry Flexible/Adjustable Actuator Flat Actuator 36 (1.41) Code Barrel Screws M4 x 8 Torx Head 5.5 (0.21) 20.8 (0.81) 93 (3.66) Bottom Entry 57.7 (2.27) 5 (0.19) 34 (1.33) 5.5 (0.21) 3.5 (0.13) Standard Actuator 31 (1.22) 3.5 (0.13) M5 CSK 52 (2.04) 13 40 (1.57) 8 (0.51) (0.31) 2 Off 5.5 Slots 51 (2.0) 20 (0.78) 52 (2.04) 40 (1.57) Dimensions are not intended to be used for installation purposes. Single Key Slamlock 4 (0.15) 18 (0.70) 36 (1.41) 14.5 (0.57) 5-25