P/N T-90 DIP Extractor Tool FEATURES •An extremely handy, economical tool for removing ICs from DIP sockets. •Reduces the risk of pin damage associated with stubborn IC removal as well as finger injury. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. P/N T-516AS DIP-R-SIZER™ Tool FEATURES •The DIP-R-SIZER™ tool straightens DIP IC legs on 0.300 [7.62] or 0.600 [15.24] centers with one easy squeeze. •Place 0.300 [7.62] center ICs in one side of tool, 0.600 [15.24] center ICs in the other and just squeeze the handles together. •Brings leads into tolerance – 0.320 [8.12] or 0.620 [15.74] •The T-561AS tool is constructed from anti-static plastic. ALL DIMENSIONS: INCHES [MILLIMETERS] SEE DATA SHEETS 16005 FOR SERIES 680 PROGRAMMABLE HEADER. ORDERING INFORMATION Specify P/N T-90 DIP Extractor Specify P/N T-516AS DIP-R-Sizer™ SEE DATA SHEETS 16004 FOR SERIES 675 PROGRAMMABLE HEADER. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 22003 Rev. AB