P/N T-680 Programming Tool FEATURES •This Programming Tool is designed for programming of Series 680 Programmable Headers through “Top-Slot” header covers. •Tool easily removes interconnections between pins without header cover removal and allows for on-the-spot programming. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. P/N T-675 Programming Tool ORDERING INFORMATION Specify P/N T-680 Programming Tool Specify P/N T-675 Programming Tool FEATURES •This programming tool is designed especially for Series 675 Programmable Headers. •Tool easily removes interconnections between pins and allows for on-the-spot programming. ALL DIMENSIONS: INCHES [MILLIMETERS] SEE DATA SHEETS 16005 FOR SERIES 680 PROGRAMMABLE HEADER. SEE DATA SHEETS 16004 FOR SERIES 675 PROGRAMMABLE HEADER. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 22002 Rev. AA