TI PCI1520-EP

Data Manual
2003
PCIBus Solutions
SGLS168A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Amplifiers
Applications
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2003, Texas Instruments Incorporated
Contents
Section
1
2
3
Title
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.6
PCI1520-EP Data Manual Document History . . . . . . . . . . . . . . . . . . . .
Terminal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature/Protocol Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Power Supply Sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
I/O Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Clamping Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4
Peripheral Component Interconnect (PCI) Interface . . . . . . . . . . . . . .
3.4.1
PCI GRST Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.2
PCI Bus Lock (LOCK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.3
Loading Subsystem Identification . . . . . . . . . . . . . . . . . . . . .
3.5
PC Card Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1
PC Card Insertion/Removal and Recognition . . . . . . . . . . .
3.5.2
P2C Power-Switch Interface (TPS222X) . . . . . . . . . . . . . . .
3.5.3
Zoomed Video Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.4
Standardized Zoomed-Video Register Model . . . . . . . . . . .
3.5.5
Internal Ring Oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.6
Integrated Pullup Resistors . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.7
SPKROUT and CAUDPWM Usage . . . . . . . . . . . . . . . . . . .
3.5.8
LED Socket Activity Indicators . . . . . . . . . . . . . . . . . . . . . . . .
3.5.9
CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6
Serial-Bus Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.1
Serial-Bus Interface Implementation . . . . . . . . . . . . . . . . . . .
3.6.2
Serial-Bus Interface Protocol . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.3
Serial-Bus EEPROM Application . . . . . . . . . . . . . . . . . . . . . .
3.6.4
Accessing Serial-Bus Devices Through Software . . . . . . .
3.7
Programmable Interrupt Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.1
PC Card Functional and Card Status Change
Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.2
Interrupt Masks and Flags . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.3
Using Parallel IRQ Interrupts . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.4
Using Parallel PCI Interrupts . . . . . . . . . . . . . . . . . . . . . . . . .
Page
1−1
1−1
1−1
1−2
1−2
1−2
1−3
2−1
3−1
3−1
3−2
3−2
3−2
3−2
3−3
3−3
3−4
3−4
3−4
3−5
3−7
3−8
3−8
3−9
3−10
3−10
3−11
3−11
3−11
3−13
3−14
3−15
3−15
3−17
3−17
3−18
iii
4
iv
3.7.5
Using Serialized IRQSER Interrupts . . . . . . . . . . . . . . . . . . .
3.7.6
SMI Support in the PCI1520 . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8
Power Management Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.1
Integrated Low-Dropout Voltage Regulator (LDO-VR) . . . .
3.8.2
Clock Run Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.3
CardBus PC Card Power Management . . . . . . . . . . . . . . . .
3.8.4
16-Bit PC Card Power Management . . . . . . . . . . . . . . . . . . .
3.8.5
Suspend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.6
Requirements for Suspend Mode . . . . . . . . . . . . . . . . . . . . .
3.8.7
Ring Indicate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.8
PCI Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.9
CardBus Bridge Power Management . . . . . . . . . . . . . . . . . .
3.8.10
ACPI Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8.11
Master List of PME Context Bits and Global
Reset-Only Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Card Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
PCI Configuration Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . .
4.2
Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Device ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4
Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5
Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6
Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.7
PCI Class Code Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.8
Cache Line Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.9
Latency Timer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.10 Header Type Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.11 BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.12 CardBus Socket/ExCA Base-Address Register . . . . . . . . . . . . . . . . . .
4.13 Capability Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.14 Secondary Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.15 PCI Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.16 CardBus Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.17 Subordinate Bus Number Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.18 CardBus Latency Timer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.19 Memory Base Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.20 Memory Limit Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.21 I/O Base Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.22 I/O Limit Registers 0, 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.23 Interrupt Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.24 Interrupt Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.25 Bridge Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.26 Subsystem Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.27 Subsystem ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.28 PC Card 16-Bit I/F Legacy-Mode Base Address Register . . . . . . . . .
3−18
3−18
3−19
3−19
3−19
3−20
3−20
3−20
3−21
3−21
3−22
3−23
3−24
3−25
4−1
4−1
4−2
4−2
4−3
4−4
4−5
4−5
4−5
4−6
4−6
4−6
4−7
4−7
4−8
4−9
4−9
4−9
4−10
4−10
4−11
4−11
4−12
4−12
4−13
4−14
4−15
4−15
4−15
4.29
4.30
4.31
4.32
4.33
4.34
4.35
4.36
4.37
4.38
4.39
5
System Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multifunction Routing Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Retry Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Card Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostic Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Capability ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Next-Item Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power-Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . .
Power-Management Control/Status Register . . . . . . . . . . . . . . . . . . . .
Power-Management Control/Status Register Bridge
Support Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.40 Power-Management Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.41 General-Purpose Event Status Register . . . . . . . . . . . . . . . . . . . . . . . .
4.42 General-Purpose Event Enable Register . . . . . . . . . . . . . . . . . . . . . . .
4.43 General-Purpose Input Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.44 General-Purpose Output Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.45 Serial-Bus Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.46 Serial-Bus Index Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.47 Serial-Bus Slave Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.48 Serial-Bus Control and Status Register . . . . . . . . . . . . . . . . . . . . . . . . .
ExCA Compatibility Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . . .
5.1
ExCA Identification and Revision Register . . . . . . . . . . . . . . . . . . . . . .
5.2
ExCA Interface Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3
ExCA Power Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4
ExCA Interrupt and General Control Register . . . . . . . . . . . . . . . . . . .
5.5
ExCA Card Status-Change Register . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6
ExCA Card Status-Change Interrupt Configuration Register . . . . . . .
5.7
ExCA Address Window Enable Register . . . . . . . . . . . . . . . . . . . . . . . .
5.8
ExCA I/O Window Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.9
ExCA I/O Windows 0 and 1 Start-Address Low-Byte Registers . . . .
5.10 ExCA I/O Windows 0 and 1 Start-Address High-Byte Registers . . . .
5.11 ExCA I/O Windows 0 and 1 End-Address Low-Byte Registers . . . . .
5.12 ExCA I/O Windows 0 and 1 End-Address High-Byte Registers . . . .
5.13 ExCA Memory Windows 0−4 Start-Address Low-Byte Registers . . .
5.14 ExCA Memory Windows 0−4 Start-Address High-Byte Registers . . .
5.15 ExCA Memory Windows 0−4 End-Address Low-Byte Registers . . . .
5.16 ExCA Memory Windows 0−4 End-Address High-Byte Registers . . .
5.17 ExCA Memory Windows 0−4 Offset-Address Low-Byte Registers . .
5.18 ExCA Memory Windows 0−4 Offset-Address High-Byte Registers .
5.19 ExCA Card Detect and General Control Register . . . . . . . . . . . . . . . .
5.20 ExCA Global Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.21 ExCA I/O Windows 0 and 1 Offset-Address Low-Byte Registers . . .
5.22 ExCA I/O Windows 0 and 1 Offset-Address High-Byte Registers . . .
4−16
4−19
4−21
4−22
4−23
4−24
4−25
4−25
4−26
4−27
4−28
4−28
4−29
4−30
4−31
4−32
4−32
4−33
4−33
4−34
5−1
5−5
5−6
5−7
5−8
5−9
5−10
5−11
5−12
5−13
5−13
5−14
5−14
5−15
5−16
5−17
5−18
5−19
5−20
5−21
5−22
5−23
5−23
v
6
7
8
vi
5.23 ExCA Memory Windows 0−4 Page Registers . . . . . . . . . . . . . . . . . . . 5−24
CardBus Socket Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . . . . . . . 6−1
6.1
Socket Event Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6−2
6.2
Socket Mask Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6−3
6.3
Socket Present-State Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6−4
6.4
Socket Force Event Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6−6
6.5
Socket Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6−8
6.6
Socket Power-Management Register . . . . . . . . . . . . . . . . . . . . . . . . . . 6−9
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7−1
7.1
Absolute Maximum Ratings Over Operating Temperature Ranges . 7−1
7.2
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 7−2
7.3
Electrical Characteristics Over Recommended
Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7−3
7.4
PCI Clock/Reset Timing Requirements Over Recommended
Ranges of Supply Voltage and Operating Free-Air Temperature . . . 7−3
7.5
PCI Timing Requirements Over Recommended Ranges of
Supply Voltage and Operating Free-Air Temperature . . . . . . . . . . . . . 7−4
Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8−1
List of Illustrations
Figure
Title
2−1 PCI1520 GHK-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−2 PCI1520 PDV-Package Terminal Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−1 PCI1520 Simplified Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−2 3-State Bidirectional Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−3 TPS222X Typical Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−4 Zoomed Video Implementation Using the PCI1520 . . . . . . . . . . . . . . . . . . . .
3−5 Zoomed Video Switching Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−6 Sample Application of SPKROUT and CAUDPWM . . . . . . . . . . . . . . . . . . . .
3−7 Two Sample LED Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−8 Serial EEPROM Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−9 Serial-Bus Start/Stop Conditions and Bit Transfers . . . . . . . . . . . . . . . . . . . .
3−10 Serial-Bus Protocol Acknowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−11 Serial-Bus Protocol − Byte Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−12 Serial-Bus Protocol − Byte Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−13 EEPROM Interface Doubleword Data Collection . . . . . . . . . . . . . . . . . . . . .
3−14 IRQ Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−15 Signal Diagram of Suspend Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−16 RI_OUT Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−17 Block Diagram of a Status/Enable Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−1 ExCA Register Access Through I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−2 ExCA Register Access Through Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−1 Accessing CardBus Socket Registers Through PCI Memory . . . . . . . . . . . .
Page
2−1
2−2
3−1
3−2
3−5
3−6
3−6
3−10
3−10
3−11
3−12
3−12
3−13
3−13
3−13
3−18
3−21
3−22
3−24
5−1
5−2
6−1
vii
List of Tables
Table
Title
2−1 Signal Names by PDV Terminal Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−2 Signal Names by GHK Terminal Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−3 CardBus PC Card Signal Names Sorted Alphabetically . . . . . . . . . . . . . . . .
2−4 16-Bit PC Card Signal Names Sorted Alphabetically . . . . . . . . . . . . . . . . . . .
2−5 Power Supply Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−6 PC Card Power Switch Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−7 PCI System Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−8 PCI Address and Data Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−9 PCI Interface Control Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2−10 Multifunction and Miscellaneous Terminals . . . . . . . . . . . . . . . . . . . . . . . . . .
2−11 16-Bit PC Card Address and Data Terminals (Slots A and B) . . . . . . . . . .
2−12 16-Bit PC Card Interface Control Terminals (Slots A and B) . . . . . . . . . . . .
2−13 CardBus PC Card Interface System Terminals (Slots A and B) . . . . . . . . .
2−14 CardBus PC Card Address and Data Terminals (Slots A and B) . . . . . . . .
2−15 CardBus PC Card Interface Control Terminals (Slots A and B) . . . . . . . . .
3−1 PC Card Card-Detect and Voltage-Sense Connections . . . . . . . . . . . . . . . .
3−2 Power Switch Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−3 Functionality of the ZV Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−4 Zoomed-Video Card Interrogation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−5 Integrated Pullup Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−6 CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−7 Register- and Bit-Loading Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−8 PCI1520 Registers Used to Program Serial-Bus Devices . . . . . . . . . . . . . . .
3−9 Interrupt Mask and Flag Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−10 PC Card Interrupt Events and Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−11 Interrupt Pin Register Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−12 SMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3−13 Requirements for Internal/External 2.5-V Core Power Supply . . . . . . . . . .
3−14 Power-Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−1 PCI Configuration Registers (Functions 0 and 1) . . . . . . . . . . . . . . . . . . . . . .
4−2 Bit Field Access Tag Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−3 Command Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−4 Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−5 Secondary Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−6 Interrupt Pin Register Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−7 Bridge Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−8 System Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii
Page
2−3
2−5
2−7
2−9
2−11
2−11
2−12
2−13
2−14
2−15
2−16
2−17
2−19
2−20
2−21
3−4
3−5
3−7
3−8
3−9
3−11
3−14
3−15
3−16
3−16
3−18
3−19
3−19
3−23
4−1
4−2
4−3
4−4
4−8
4−13
4−14
4−17
4−9 Multifunction Routing Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−10 Retry Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−11 Card Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−12 Device Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−13 Diagnostic Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−14 Power-Management Capabilities Register Description . . . . . . . . . . . . . . . .
4−15 Power-Management Control/Status Register Description . . . . . . . . . . . . . .
4−16 Power-Management Control/Status Register Bridge Support
Extensions Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−17 General-Purpose Event Status Register Description . . . . . . . . . . . . . . . . . .
4−18 General-Purpose Event Enable Register Description . . . . . . . . . . . . . . . . .
4−19 General-Purpose Input Register Description . . . . . . . . . . . . . . . . . . . . . . . . .
4−20 General-Purpose Output Register Description . . . . . . . . . . . . . . . . . . . . . . .
4−21 Serial-Bus Data Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−22 Serial-Bus Index Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4−23 Serial-Bus Slave Address Register Description . . . . . . . . . . . . . . . . . . . . . .
4−24 Serial-Bus Control and Status Register Description . . . . . . . . . . . . . . . . . . .
5−1 ExCA Registers and Offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−2 ExCA Identification and Revision Register Description . . . . . . . . . . . . . . . . .
5−3 ExCA Interface Status Register Description . . . . . . . . . . . . . . . . . . . . . . . . . .
5−4 ExCA Power Control Register Description—82365SL Support . . . . . . . . . .
5−5 ExCA Power Control Register Description—82365SL-DF Support . . . . . . .
5−6 ExCA Interrupt and General Control Register Description . . . . . . . . . . . . . .
5−7 ExCA Card Status-Change Register Description . . . . . . . . . . . . . . . . . . . . . .
5−8 ExCA Card Status-Change Interrupt Configuration
Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−9 ExCA Address Window Enable Register Description . . . . . . . . . . . . . . . . . . .
5−10 ExCA I/O Window Control Register Description . . . . . . . . . . . . . . . . . . . . . .
5−11 ExCA Memory Windows 0−4 Start-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−12 ExCA Memory Windows 0−4 End-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−13 ExCA Memory Windows 0−4 Offset-Address High-Byte Registers
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5−14 ExCA Card Detect and General Control Register Description . . . . . . . . . .
5−15 ExCA Global Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . .
6−1 CardBus Socket Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−2 Socket Event Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−3 Socket Mask Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−4 Socket Present-State Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−5 Socket Force Event Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−6 Socket Control Register Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6−7 Socket Power-Management Register Description . . . . . . . . . . . . . . . . . . . . .
4−19
4−21
4−22
4−23
4−24
4−26
4−27
4−28
4−29
4−30
4−31
4−32
4−32
4−33
4−33
4−34
5−3
5−5
5−6
5−7
5−7
5−8
5−9
5−10
5−11
5−12
5−16
5−18
5−20
5−21
5−22
6−1
6−2
6−3
6−4
6−7
6−8
6−9
ix
x
1 Introduction
1.1 Description
The Texas Instruments PCI1520, a 208-terminal dual-slot CardBus controller designed to meet the PCI Bus Power
Management Interface Specification for PCI to CardBus Bridges, is an ultralow-power high-performance
PCI-to-CardBus controller that supports two independent card sockets compliant with the PC Card Standard (rev.
7.1). The PCI1520 provides features that make it the best choice for bridging between PCI and PC Cards in both
notebook and desktop computers. The 1997 PC Card Standard retains the 16-bit PC Card specification defined in
PCI Local Bus Specification and defines the new 32-bit PC Card, CardBus, capable of full 32-bit data transfers at
33 MHz. The PCI1520 supports any combination of 16-bit and CardBus PC Cards in the two sockets, powered at
5 V or 3.3 V, as required.
The PCI1520 is compliant with the PCI Local Bus Specification, and its PCI interface can act as either a PCI master
device or a PCI slave device. The PCI bus mastering is initiated during CardBus PC Card bridging transactions. The
PCI1520 is also compliant with PCI Bus Power Management Interface Specification (rev. 1.1).
All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI1520 is
register-compatible with the Intel 82365SL-DF and 82365SL ExCA controllers. The PCI1520 internal data path logic
allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent
buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The
PCI1520 can also be programmed to accept fast posted writes to improve system-bus utilization.
Multiple system-interrupt signaling options are provided, including parallel PCI, parallel ISA, serialized ISA, and
serialized PCI. Furthermore, general-purpose inputs and outputs are provided for the board designer to implement
sideband functions. Many other features designed into the PCI1520, such as socket activity light-emitting diode (LED)
outputs, are discussed in detail throughout the design specification.
An advanced complementary metal-oxide semiconductor (CMOS) process achieves low system power consumption
while operating at PCI clock rates up to 33 MHz. Several low-power modes enable the host power management
system to further reduce power consumption.
1.2 Features
The PCI1520-EP supports the following features:
•
Controlled Baseline
− One Assembly/Test Site, One Fabrication Site
•
Extended Temperature Performance of −40°C to 85°C
•
Enhanced Diminishing Manufacturing Sources (DMS) Support
•
Enhanced Product-Change Notification
•
Qualification Pedigree†
•
209-terminal MicroStar BGA ball-grid array (GHK) or 208-terminal low-profile QFP (PDV) package
•
2.5-V core logic and 3.3-V I/O with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling
environments
•
Integrated low-dropout voltage regulator (LDO-VR) eliminates the need for an external 2.5-V power supply
† Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.
This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this
component beyond specified performance and environmental limits.
1−1
•
Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards
•
Two PC Card or CardBus slots with hot insertion and removal
•
Serial interface to TI TPS222X dual-slot PC Card power switch
•
Burst transfers to maximize data throughput with CardBus Cards
•
Interrupt configurations: parallel PCI, serialized PCI, parallel ISA, and serialized ISA
•
Serial EEPROM interface for loading subsystem ID and subsystem vendor ID
•
Pipelined architecture for greater than 130-Mbps throughput from CardBus-to-PCI and from
PCI-to-CardBus
•
Up to five general-purpose I/Os
•
Programmable output select for CLKRUN
•
Multifunction PCI device with separate configuration space for each socket
•
Five PCI memory windows and two I/O windows available for each 16-bit interface
•
Two I/O windows and two memory windows available to each CardBus socket
•
Exchangeable-card-architecture- (ExCA-) compatible registers are mapped in memory and I/O space
•
Intel 82365SL-DF and 82365SL register compatible
•
Ring indicate, SUSPEND, PCI CLKRUN, and CardBus CCLKRUN
•
Socket activity LED terminals
•
PCI bus lock (LOCK)
•
Advanced quarter-micron, ultralow-power CMOS technology
•
Internal ring oscillator
1.3 Related Documents
•
Advanced Configuration and Power Interface (ACPI) Specification (revision 1.1)
•
PCI Bus Power Management Interface Specification (revision 1.1)
•
PCI Bus Power Management Interface Specification for PCI to CardBus Bridges (revision 0.6)
•
PCI to PCMCIA CardBus Bridge Register Description (Yenta) (revision 2.1)
•
PCI Local Bus Specification (revision 2.2)
•
PCI Mobile Design Guide (revision 1.0)
•
PC Card Standard (revision 7.1)
•
PC 2001
•
Serialized IRQ Support for PCI Systems (revision 6)
1.4 Trademarks
Intel is a trademark of Intel Corporation.
TI and MicroStar BGA are trademarks of Texas Instruments.
Other trademarks are the property of their respective owners.
1.5 Ordering Information
TEMPERATURE
−40°C to 85°C
1−2
PACKAGE
ORDERING NUMBER
TOP-SIDE MARKING
209-ball PBGA
PCI1520IGHKEP
PCI1520IEP
208-terminal LQFP
PCI1520IPDVEP
PCI1520IEP
1.6 PCI1520-EP Data Manual Document History
DATE
PAGE NUMBER
05/2003
09/2003
REVISION
Original draft
1−1, 1−2, Section 2,
7−2, 8−1, 8−2
Added PDV package
1−3
1−4
2 Terminal Descriptions
The PCI1520 is available in two packages, a 208-terminal quad flatpack (PDV) and a 209-terminal MicroStar BGA
package (GHK). The terminal layout for the GHK package is shown in Figure 2−1. The terminal layout with signal
names for the PDV package is shown in Figure 2−2.
GHK PLASTIC BALL GRID ARRAY (PBGA) PACKAGE
BOTTOM VIEW
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Figure 2−1. PCI1520 GHK-Package Terminal Diagram
2−1
AD10
AD9
AD8
C/BE0
AD7
GND
AD6
AD5
AD4
AD3
AD2
AD1
AD0
VCC
B_CCD1//B_CD1
B_CAD0//B_D3
B_CAD2//B_D11
B_CAD1//B_D4
B_CAD4//B_D12
B_CAD3//B_D5
B_CAD6//B_D13
B_CAD5//B_D6
B_RSVD//B_D14
GND
B_CAD7//B_D7
B_CAD8//B_D15
B_CC/BE0//B_CE1
B_CAD9//B_A10
VR_EN
B_CAD10//B_CE2
B_CAD11//B_OE
B_CAD12//B_A11
B_CAD13//B_IORD
B_CAD15//B_IOWR
B_CAD14//B_A9
B_CAD16//B_A17
B_CC/BE1//B_A8
B_RSVD//B_A18
VCC
B_CPAR//B_A13
B_CBLOCK//B_A19
B_CPERR//B_A14
GND
B_CSTOP//B_A20
B_CGNT//B_WE
B_CDEVSEL//B_A21
VCCB
B_CCLK//B_A16
B_CTRDY//B_A22
B_CIRDY//B_A15
B_CFRAME//B_A23
B_CC/BE2//B_A12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
MFUNC1
SUSPEND
MFUNC2
MFUNC3/IRQSER
MFUNC4
MFUNC5
MFUNC6/CLKRUN
C/BE3
RI_OUT/PME
GND
AD25
PRST
GNT
REQ
AD31
AD30
AD11
VCC
AD29
AD28
GRST
AD27
AD26
VCCP
AD24
PCLK
IDSEL
AD23
GND
AD22
AD21
AD20
AD19
AD18
AD17
AD16
C/BE2
FRAME
VCC
IRDY
TRDY
DEVSEL
GND
STOP
PERR
SERR
PAR
C/BE1
AD15
AD14
AD13
AD12
2−2
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
MFUNC0
DATA
CLOCK
LATCH
SPKROUT
A_CAD31//A_D10
A_RSVD//A_D2
A_CAD30//A_D9
A_CAD29//A_D1
GND
A_CAD28//A_D8
A_CAD27//A_D0
A_CCD2//A_CD2
VCC
A_CCLKRUN//A_WP(IOIS16)
A_CSTSCHG//A_BVD1(STSCHG/RI)
A_CAUDIO//A_BVD2(SPKR)
A_CSERR//A_WAIT
A_CINT//A_READY(IREQ)
A_CVS1//A_VS1
A_CAD26//A_A0
A_CAD25//A_A1
A_CAD24//A_A2
VCC
A_CC/BE3//A_REG
A_CAD23//A_A3
A_CREQ//A_INPACK
A_CAD22//A_A4
VR_PORT
A_CAD21//A_A5
A_CRST//A_RESET
A_CAD20//A_A6
A_CVS2//A_VS2
A_CAD19//A_A25
A_CAD18//A_A7
A_CAD17//A_A24
A_CC/BE2//A_A12
A_CFRAME//A_A23
VCC
A_CIRDY//A_A15
A_CTRDY//A_A22
A_CCLK//A_A16
VCCA
A_CDEVSEL//A_A21
A_CGNT//A_WE
A_CSTOP//A_A20
GND
A_CPERR//A_A14
A_CBLOCK//A_A19
A_CPAR//A_A13
A_RSVD//A_A18
A_CC/BE1//A_A8
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
PDV LOW-PROFILE QUAD FLAT PACKAGE
(LQFP)
TOP VIEW
PCI1520
Figure 2−2. PCI1520 PDV-Package Terminal Diagram
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
A_CAD16//A_A17
A_CAD14//A_A9
A_CAD15//A_IOWR
A_CAD13//A_IORD
A_CAD12//A_A11
A_CAD11//A_OE
A_CAD10//A_CE2
A_CAD9//A_A10
A_CC/BE0//A_CE1
GND
A_CAD8//A_D15
A_CAD7//A_D7
A_RSVD//A_D14
VCC
A_CAD5//A_D6
A_CAD6//A_D13
A_CAD3//A_D5
A_CAD4//A_D12
A_CAD1//A_D4
A_CAD2//A_D11
A_CAD0//A_D3
A_CCD1//A_CD1
B_CAD31//B_D10
NC
B_RSVD//B_D2
B_CAD30//B_D9
B_CAD29//B_D1
B_CAD28//B_D8
B_CAD27//B_D0
B_CCD2//B_CD2
B_CCLKRUN//B_WP(IOIS16)
B_CSTSCHG//B_BVD1(STSCHG/RI)
B_CAUDIO//B_BVD2(SPKR)
B_CSERR//B_WAIT
VCC
B_CINT//B_READY(IREQ)
B_CVS1//B_VS1
B_CAD26//B_A0
B_CAD25//B_A1
B_CAD24//B_A2
B_CC/BE3//B_REG
B_CAD23//B_A3
GND
B_CREQ//B_INPACK
B_CAD22//B_A4
B_CAD21//B_A5
B_CRST//B_RESET
B_CAD20//B_A6
B_CVS2//B_VS2
B_CAD19//B_A25
B_CAD18//B_A7
B_CAD17//B_A24
Table 2−1 and Table 2−2 list the terminal assignments arranged in terminal-number order, with corresponding signal
names for both CardBus and 16-bit PC Cards; Table 2−1 is for terminals on the PDV package and Table 2−2 is for
terminals on the GHK package. Table 2−3 and Table 2−4 list the terminal assignments arranged in alphanumerical
order by signal name, with corresponding terminal numbers for both PDV and GHK packages; Table 2−3 is for
CardBus signal names and Table 2−4 is for 16-bit PC Card signal names.
Terminal E5 on the GHK package is an identification ball used for device orientation; it has no internal connection
within the device.
Table 2−1. Signal Names by PDV Terminal Number
TERM.
NO.
SIGNAL NAME
CardBus
PC Card
16-Bit
PC Card
1
AD10
AD10
2
AD9
3
AD8
4
TERM.
NO.
SIGNAL NAME
CardBus
PC Card
16-Bit
PC Card
38
B_RSVD
B_A18
AD9
39
AD8
40
VCC
B_CPAR
C/BE0
C/BE0
41
5
AD7
AD7
42
6
GND
GND
43
7
AD6
AD6
44
8
AD5
AD5
45
9
AD4
AD4
46
10
AD3
AD3
47
11
AD2
AD2
12
AD1
AD1
13
AD0
14
TERM.
NO.
SIGNAL NAME
CardBus
PC Card
16-Bit
PC Card
75
B_CCD2
B_CD2
VCC
B_A13
76
B_CAD27
B_D0
77
B_CAD28
B_D8
B_CBLOCK
B_A19
78
B_CAD29
B_D1
B_CPERR
B_A14
79
B_CAD30
B_D9
GND
GND
80
B_CSTOP
B_A20
81
B_RSVD
NC†
B_D2
NC†
B_CGNT
B_WE
82
B_CAD31
B_D10
B_CDEVSEL
B_A21
83
A_CCD1
A_CD1
VCCB
B_A16
84
A_CAD0
A_D3
48
VCCB
B_CCLK
85
A_CAD2
A_D11
49
B_CTRDY
B_A22
86
A_CAD1
A_D4
AD0
50
B_CIRDY
B_A15
87
A_CAD4
A_D12
VCC
B_CD1
51
B_CFRAME
B_A23
88
A_CAD3
A_D5
15
VCC
B_CCD1
52
B_CC/BE2
B_A12
89
A_CAD6
A_D13
16
B_CAD0
B_D3
53
B_CAD17
B_A24
90
A_CAD5
A_D6
17
B_CAD2
B_D11
54
B_CAD18
B_A7
91
18
B_CAD1
B_D4
55
B_CAD19
B_A25
92
VCC
A_RSVD
VCC
A_D14
19
B_CAD4
B_D12
56
B_CVS2
B_VS2
93
A_CAD7
A_D7
20
B_CAD3
B_D5
57
B_CAD20
B_A6
94
A_CAD8
A_D15
21
B_CAD6
B_D13
58
B_CRST
B_RESET
95
GND
GND
22
B_CAD5
B_D6
59
B_CAD21
B_A5
96
A_CC/BE0
A_CE1
23
B_RSVD
B_D14
60
B_CAD22
B_A4
97
A_CAD9
A_A10
24
GND
GND
61
B_CREQ
B_INPACK
98
A_CAD10
A_CE2
25
B_CAD7
B_D7
62
GND
GND
99
A_CAD11
A_OE
26
B_CAD8
B_D15
63
B_CAD23
B_A3
100
A_CAD12
A_A11
27
B_CC/BE0
B_CE1
64
B_CC/BE3
B_REG
101
A_CAD13
A_IORD
28
B_CAD9
B_A10
65
B_CAD24
B_A2
102
A_CAD15
A_IOWR
29
VR_EN
VR_EN
66
B_CAD25
B_A1
103
A_CAD14
A_A9
30
B_CAD10
B_CE2
67
B_CAD26
B_A0
104
A_CAD16
A_A17
31
B_CAD11
B_OE
68
B_CVS1
B_VS1
105
A_CC/BE1
A_A8
32
B_CAD12
B_A11
69
B_CINT
B_READY(IREQ)
106
A_RSVD
A_A18
33
B_CAD13
B_IORD
70
A_CPAR
A_A13
B_CAD15
B_IOWR
71
VCC
B_WAIT
107
34
VCC
B_CSERR
108
A_CBLOCK
A_A19
35
B_CAD14
B_A9
72
B_CAUDIO
B_BVD2(SPKR)
109
A_CPERR
A_A14
36
B_CAD16
B_A17
73
B_CSTSCHG
B_BVD1(STSCHG/RI)
110
GND
GND
37
B_CC/BE1
B_A8
74
B_CCLKRUN
B_WP(IOIS16)
111
A_CSTOP
A_A20
† Terminal 81 is an NC on the PCI1520 to allow for terminal compatibility with the next generation of devices.
2−3
Table 2−1. Signal Names by PDV Terminal Number (Continued)
SIGNAL NAME
TERM.
NO.
16-Bit
PC Card
SIGNAL NAME
CardBus
PC Card
16-Bit
PC Card
TERM.
NO.
CardBus
PC Card
16-Bit
PC Card
AD27
112
A_CGNT
A_WE
145
A_CAD27
A_D0
178
AD27
113
A_CDEVSEL
A_A21
146
A_CAD28
A_D8
179
AD26
AD26
114
VCCA
A_A16
147
GND
GND
180
115
VCCA
A_CCLK
148
A_CAD29
A_D1
181
VCCP
AD24
VCCP
AD24
116
A_CTRDY
A_A22
149
A_CAD30
A_D9
182
PCLK
PCLK
117
A_CIRDY
A_A15
150
A_RSVD
A_D2
183
IDSEL
IDSEL
118
VCC
A_A23
151
A_CAD31
A_D10
184
AD23
AD23
119
VCC
A_CFRAME
152
SPKROUT
SPKROUT
185
GND
GND
120
A_CC/BE2
A_A12
153
LATCH
LATCH
186
AD22
AD22
121
A_CAD17
A_A24
154
CLOCK
CLOCK
187
AD21
AD21
122
A_CAD18
A_A7
155
DATA
DATA
188
AD20
AD20
123
A_CAD19
A_A25
156
MFUNC0
MFUNC0
189
AD19
AD19
124
A_CVS2
A_VS2
157
MFUNC1
MFUNC1
190
AD18
AD18
125
A_CAD20
A_A6
158
SUSPEND
SUSPEND
191
AD17
AD17
126
A_CRST
A_RESET
159
MFUNC2
MFUNC2
192
AD16
AD16
127
A_CAD21
A_A5
160
MFUNC3/IRQSER
MFUNC3/IRQSER
193
C/BE2
C/BE2
128
VR_PORT
VR_PORT
161
MFUNC4
MFUNC4
194
FRAME
FRAME
129
A_CAD22
A_A4
162
MFUNC5
MFUNC5
195
130
A_CREQ
A_INPACK
163
MFUNC6/CLKRUN
MFUNC6/CLKRUN
196
VCC
IRDY
VCC
IRDY
131
A_CAD23
A_A3
164
C/BE3
C/BE3
197
TRDY
TRDY
132
A_CC/BE3
A_REG
165
RI_OUT/PME
RI_OUT/PME
198
DEVSEL
DEVSEL
133
VCC
A_CAD24
VCC
A_A2
166
GND
GND
199
GND
GND
134
167
AD25
AD25
200
STOP
STOP
135
A_CAD25
A_A1
168
PRST
PRST
201
PERR
PERR
136
A_CAD26
A_A0
169
GNT
GNT
202
SERR
SERR
137
A_CVS1
A_VS1
170
REQ
REQ
203
PAR
PAR
138
A_CINT
A_READY(IREQ)
171
AD31
AD31
204
C/BE1
C/BE1
139
A_CSERR
A_WAIT
172
AD30
AD30
205
AD15
AD15
140
A_CAUDIO
A_BVD2(SPKR)
173
AD11
AD11
206
AD14
AD14
141
A_CSTSCHG
A_BVD1(STSCHG/
RI)
174
VCC
VCC
207
AD13
AD13
142
A_CCLKRUN
A_WP(IOIS16)
175
AD29
AD29
208
AD12
AD12
143
VCC
A_CCD2
VCC
A_CD2
176
AD28
AD28
177
GRST
GRST
144
2−4
CardBus
PC Card
SIGNAL NAME
TERM.
NO.
Table 2−2. Signal Names by GHK Terminal Number
SIGNAL NAME
TERM.
NO.
SIGNAL NAME
TERM.
NO.
CardBus
PC Card
16-Bit
PC Card
A04
AD12
AD12
E07
PERR
PERR
H06
AD2
AD2
A05
PAR
PAR
E08
FRAME
FRAME
H14
A_CSTSCHG
A_BVD1(STSCHG/RI)
A06
GND
GND
E09
AD19
AD19
H15
A_CCLKRUN
A_WP(IOIS16)
A07
VCC
AD18
VCC
AD18
E10
IDSEL
IDSEL
H17
A_CAUDIO
A_BVD2(SPKR)
E11
AD27
AD27
H18
A_CSERR
A_WAIT
A08
CardBus
PC Card
SIGNAL NAME
16-Bit
PC Card
TERM.
NO.
CardBus
PC Card
16-Bit
PC Card
A09
GND
GND
E12
AD31
AD31
H19
A_CINT
A_READY(IREQ)
A10
VCCP
AD29
VCCP
AD29
E13
RI_OUT/PME
RI_OUT/PME
J01
B_CAD4
B_D12
E14
MFUNC2
MFUNC2
J02
B_CAD3
B_D5
VCC
REQ
VCC
REQ
E17
DATA
DATA
J03
B_CAD6
B_D13
E18
LATCH
LATCH
J05
B_CAD5
B_D6
A11
A12
A13
A14
GND
GND
E19
A_CAD31
A_D10
J06
B_RSVD
B_D14
A15
MFUNC5
MFUNC5
F01
AD3
AD3
J14
A_CAD26
A_A0
A16
MFUNC1
MFUNC1
F02
AD5
AD5
J15
A_CVS1
A_VS1
B05
AD15
AD15
F03
AD6
AD6
J17
A_CAD25
A_A1
B06
STOP
STOP
F05
AD8
AD8
J18
A_CAD24
A_A2
VCC
GND
B07
IRDY
IRDY
F06
C/BE1
C/BE1
J19
B08
AD17
AD17
F07
DEVSEL
DEVSEL
K01
VCC
GND
B09
AD22
AD22
F08
C/BE2
C/BE2
K02
B_CAD7
B_D7
B10
AD24
AD24
F09
AD20
AD20
K03
B_CAD8
B_D15
B11
AD28
AD28
F10
AD23
AD23
K05
B_CC/BE0
B_CE1
B12
AD11
AD11
F11
AD26
AD26
K06
B_CAD9
B_A10
B13
GNT
GNT
F12
AD25
AD25
K14
A_CC/BE3
A_REG
B14
C/BE3
C/BE3
F13
MFUNC3/IRQSER
MFUNC3/IRQSER
K15
A_CAD23
A_A3
B15
MFUNC4
MFUNC4
F14
SPKROUT
SPKROUT
K17
A_CREQ
A_INPACK
C05
AD13
AD13
F15
CLOCK
CLOCK
K18
A_CAD22
A_A4
C06
SERR
SERR
F17
A_RSVD
A_D2
K19
VR_PORT
VR_PORT
C07
TRDY
TRDY
F18
A_CAD29
A_D1
L01
VR_EN
VR_EN
C08
AD16
AD16
F19
GND
GND
L02
B_CAD10
B_CE2
C09
AD21
AD21
G01
VCC
AD0
L03
B_CAD11
B_OE
C10
PCLK
PCLK
G02
VCC
AD0
L05
B_CAD13
B_IORD
C11
GRST
GRST
G03
AD1
AD1
L06
B_CAD12
B_A11
C12
AD30
AD30
G05
AD4
AD4
L14
A_CAD21
A_A5
C13
PRST
PRST
G06
C/BE0
C/BE0
L15
A_CRST
A_RESET
C14
MFUNC6/
CLKRUN
MFUNC6/
CLKRUN
G14
A_CAD28
A_D8
L17
A_CAD20
A_A6
C15
SUSPEND
SUSPEND
G15
A_CAD30
A_D9
L18
A_CVS2
A_VS2
D01
AD10
AD10
G17
A_CAD27
A_D0
L19
A_CAD19
A_A25
D19
MFUNC0
MFUNC0
G18
A_CCD2
A_CD2
M01
B_CAD15
B_IOWR
E01
GND
GND
G19
B_CAD14
B_A9
AD7
AD7
H01
VCC
B_D4
M02
E02
VCC
B_CAD1
M03
B_CAD16
B_A17
E03
AD9
AD9
H02
B_CAD2
B_D11
M05
B_RSVD
B_A18
E05
NC
NC
H03
B_CAD0
B_D3
M06
B_CC/BE1
B_A8
E06
AD14
AD14
H05
B_CCD1
B_CD1
M14
A_CCLK
A_A16
2−5
Table 2−2. Signal Names by GHK Terminal Number (Continued)
SIGNAL NAME
TERM.
NO.
CardBus
PC Card
16-Bit
PC Card
M15
A_CFRAME
A_A23
M17
A_CC/BE2
A_A12
M18
A_CAD17
M19
N01
SIGNAL NAME
TERM.
NO.
SIGNAL NAME
TERM.
NO.
CardBus
PC Card
16-Bit
PC Card
CardBus
PC Card
P17
A_CSTOP
A_A20
U13
A_CAD7
A_D7
P18
A_CGNT
A_WE
U14
A_CAD10
A_CE2
A_A24
P19
A_CAD14
A_A9
A_A7
R01
VCCA
VCCB
U15
A_CAD18
VCCA
VCCB
V05
B_CAD20
B_A6
VCC
B_A13
R02
B_CTRDY
B_A22
V06
B_CAD22
B_A4
N02
VCC
B_CPAR
R03
B_CFRAME
B_A23
V07
B_CAD24
B_A2
N03
B_CBLOCK
B_A19
R06
B_CAD19
B_A25
V08
B_CINT
B_READY(IREQ)
N05
B_CGNT
B_WE
R07
B_CREQ
B_INPACK
V09
B_CAUDIO
B_BVD2(SPKR)
N06
B_CPERR
B_A14
R08
B_CAD26
B_A0
V10
B_CAD28
B_D8
N14
A_CBLOCK
A_A19
R09
B_CCLKRUN
B_WP(IOIS16)
V11
B_CAD31
B_D10
N15
A_CDEVSEL
A_A21
R10
B_CAD30
B_D9
V12
A_CAD4
A_D12
N17
A_CTRDY
A_A22
R11
A_CAD2
A_D11
V13
A_RSVD
A_D14
N18
A_CIRDY
A_A15
R12
A_CAD5
A_D6
V14
A_CC/BE0
A_CE1
N19
VCC
GND
VCC
GND
R13
A_CAD9
A_A10
V15
A_CAD13
A_IORD
P01
R14
A_CAD15
A_IOWR
W04
B_CAD17
B_A24
P02
B_CSTOP
B_A20
R17
A_RSVD
A_A18
W05
B_CRST
B_RESET
P03
B_CDEVSEL
B_A21
R18
A_CPERR
A_A14
W06
GND
GND
P05
B_CIRDY
B_A15
R19
GND
GND
W07
B_CAD25
B_A1
P06
B_CCLK
B_A16
T01
B_CC/BE2
B_A12
W08
P07
B_CVS2
B_VS2
T19
A_CC/BE1
A_A8
W09
VCC
B_CSERR
VCC
B_WAIT
P08
B_CAD23
B_A3
U05
B_CAD18
B_A7
W10
P09
B_CCD2
B_CD2
U06
B_CAD21
B_A5
W11
B_CAD27
NC†
B_D0
NC†
P10
B_RSVD
B_D2
U07
B_CC/BE3
B_REG
W12
A_CAD1
A_D4
P11
A_CAD0
A_D3
U08
B_CVS1
B_VS1
W13
P12
A_CAD6
A_D13
U09
B_CSTSCHG
B_BVD1(STSCHG/RI)
W14
VCC
GND
VCC
GND
P13
A_CAD8
A_D15
U10
B_CAD29
B_D1
W15
A_CAD11
A_OE
P14
A_CAD12
A_A11
U11
A_CCD1
A_CD1
W16
A_CAD16
A_A17
P15
A_CPAR
A_A13
U12
A_CAD3
A_D5
† Terminal W11 is an NC on the PCI1520 to allow for terminal compatibility with the next generation of devices.
2−6
16-Bit
PC Card
Table 2−3. CardBus PC Card Signal Names Sorted Alphabetically
TERM NO.
SIGNAL NAME
PDV
GHK
A_CAD0
84
P11
A_CAD1
86
A_CAD2
85
A_CAD3
88
A_CAD4
A_CAD5
A_CAD6
A_CAD7
A_CAD8
94
A_CAD9
97
A_CAD10
98
A_CAD11
99
A_CAD12
100
A_CAD13
101
A_CAD14
103
A_CAD15
102
A_CAD16
A_CAD17
TERM. NO.
SIGNAL NAME
PDV
GHK
A_CDEVSEL
113
N15
W12
A_CFRAME
119
R11
A_CGNT
112
U12
A_CINT
87
V12
90
R12
89
93
TERM. NO.
SIGNAL NAME
PDV
GHK
AD24
181
B10
M15
AD25
167
F12
P18
AD26
179
F11
138
H19
AD27
178
E11
A_CIRDY
117
N18
AD28
176
B11
A_CPAR
107
P15
AD29
175
A11
P12
A_CPERR
109
R18
AD30
172
C12
U13
A_CREQ
130
K17
AD31
171
E12
P13
A_CRST
126
L15
B_CAD0
16
H03
R13
A_CSERR
139
H18
B_CAD1
18
H01
U14
A_CSTOP
111
P17
B_CAD2
17
H02
W15
A_CSTSCHG
141
H14
B_CAD3
20
J02
P14
A_CTRDY
116
N17
B_CAD4
19
J01
V15
A_CVS1
137
J15
B_CAD5
22
J05
U15
A_CVS2
124
L18
B_CAD6
21
J03
R14
A_RSVD
106
R17
B_CAD7
25
K02
104
W16
A_RSVD
92
V13
B_CAD8
26
K03
121
M18
A_RSVD
150
F17
B_CAD9
28
K06
A_CAD18
122
M19
AD0
13
G02
B_CAD10
30
L02
A_CAD19
123
L19
AD1
12
G03
B_CAD11
31
L03
A_CAD20
125
L17
AD2
11
H06
B_CAD12
32
L06
A_CAD21
127
L14
AD3
10
F01
B_CAD13
33
L05
A_CAD22
129
K18
AD4
9
G05
B_CAD14
35
M02
A_CAD23
131
K15
AD5
8
F02
B_CAD15
34
M01
A_CAD24
134
J18
AD6
7
F03
B_CAD16
36
M03
A_CAD25
135
J17
AD7
5
E02
B_CAD17
53
W04
A_CAD26
136
J14
AD8
3
F05
B_CAD18
54
U05
A_CAD27
145
G17
AD9
2
E03
B_CAD19
55
R06
A_CAD28
146
G14
AD10
1
D01
B_CAD20
57
V05
A_CAD29
148
F18
AD11
173
B12
B_CAD21
59
U06
A_CAD30
149
G15
AD12
208
A04
B_CAD22
60
V06
A_CAD31
151
E19
AD13
207
C05
B_CAD23
63
P08
A_CAUDIO
140
H17
AD14
206
E06
B_CAD24
65
V07
A_CBLOCK
108
N14
AD15
205
B05
B_CAD25
66
W07
A_CC/BE0
96
V14
AD16
192
C08
B_CAD26
67
R08
A_CC/BE1
105
T19
AD17
191
B08
B_CAD27
76
W10
A_CC/BE2
120
M17
AD18
190
A08
B_CAD28
77
V10
A_CC/BE3
132
K14
AD19
189
E09
B_CAD29
78
U10
A_CCD1
83
U11
AD20
188
F09
B_CAD30
79
R10
A_CCD2
144
G18
AD21
187
C09
B_CAD31
82
V11
A_CCLK
115
M14
AD22
186
B09
B_CAUDIO
72
V09
A_CCLKRUN
142
H15
AD23
184
F10
B_CBLOCK
41
N03
2−7
Table 2−3. CardBus PC Card Signal Names Sorted Alphabetically (Continued)
TERM NO.
SIGNAL NAME
PDV
GHK
B_CC/BE0
27
K05
B_CC/BE1
37
B_CC/BE2
52
B_CC/BE3
TERM NO.
SIGNAL NAME
PDV
GHK
C/BE2
193
F08
M06
C/BE3
164
T01
CLOCK
154
64
U07
DATA
155
B_CCD1
15
H05
DEVSEL
B_CCD2
75
P09
FRAME
TERM NO.
SIGNAL NAME
GHK
—
E05
81
W11
B14
F15
PAR
203
A05
E17
PCLK
182
C10
198
F07
PERR
201
E07
194
E08
PRST
168
C13
A13
B_CCLK
48
P06
GND
6
A06
REQ
170
B_CCLKRUN
74
R09
GND
24
A09
RI_OUT/PME
165
E13
B_CDEVSEL
46
P03
GND
43
A14
SERR
202
C06
B_CFRAME
51
R03
GND
62
E01
SPKROUT
152
F14
B_CGNT
45
N05
GND
95
K01
STOP
200
B06
B_CINT
69
V08
GND
110
P01
SUSPEND
158
C15
B_CIRDY
50
P05
GND
147
R19
TRDY
197
C07
B_CPAR
40
N02
GND
166
W06
14
A07
B_CPERR
42
N06
GND
185
F19
VCC
VCC
39
A12
B_CREQ
61
R07
GND
199
W14
70
G01
B_CRST
58
W05
GNT
169
B13
VCC
VCC
91
G19
B_CSERR
71
W09
GRST
177
C11
J19
44
P02
IDSEL
183
E10
VCC
VCC
118
B_CSTOP
133
N01
B_CSTSCHG
73
U09
IRDY
196
B07
N19
49
R02
LATCH
153
E18
VCC
VCC
143
B_CTRDY
174
W08
B_CVS1
68
U08
MFUNC0
156
D19
VCC
VCCA
195
W13
114
P19
47
R01
180
A10
B_CVS2
56
P07
MFUNC1
157
A16
B_RSVD
23
J06
MFUNC2
159
E14
B_RSVD
38
M05
MFUNC3/IRQSER
160
F13
VCCB
VCCP
B_RSVD
80
P10
MFUNC4
161
B15
VR_EN
29
L01
C/BE0
4
G06
MFUNC5
162
A15
VR_PORT
128
K19
C/BE1
204
F06
MFUNC6/CLKRUN
163
C14
† Terminals 81 and W11 are NC on the PCI1520 to allow for terminal compatibility with the next generation of devices.
2−8
PDV
NC
NC†
Table 2−4. 16-Bit PC Card Signal Names Sorted Alphabetically
TERM. NO.
SIGNAL NAME
TERM. NO.
SIGNAL NAME
TERM NO.
SIGNAL NAME
PDV
GHK
AD24
181
B10
R11
AD25
167
F12
V12
AD26
179
F11
89
P12
AD27
178
E11
A_D14
92
V13
AD28
176
B11
A_D15
94
P13
AD29
175
A11
L17
A_INPACK
130
K17
AD30
172
C12
M19
A_IORD
101
V15
AD31
171
E12
T19
A_IOWR
102
R14
B_A0
67
R08
U15
A_OE
99
W15
B_A1
66
W07
R13
A_READY(IREQ)
138
H19
B_A2
65
V07
P14
A_REG
132
K14
B_A3
63
P08
120
M17
A_RESET
126
L15
B_A4
60
V06
107
P15
A_VS1
137
J15
B_A5
59
U06
A_A14
109
R18
A_VS2
124
L18
B_A6
57
V05
A_A15
117
N18
A_WAIT
139
H18
B_A7
54
U05
A_A16
115
M14
A_WE
112
P18
B_A8
37
M06
A_A17
104
W16
A_WP(IOIS16)
142
H15
B_A9
35
M02
A_A18
106
R17
AD0
13
G02
B_A10
28
K06
A_A19
108
N14
AD1
12
G03
B_A11
32
L06
A_A20
111
P17
AD2
11
H06
B_A12
52
T01
A_A21
113
N15
AD3
10
F01
B_A13
40
N02
A_A22
116
N17
AD4
9
G05
B_A14
42
N06
A_A23
119
M15
AD5
8
F02
B_A15
50
P05
A_A24
121
M18
AD6
7
F03
B_A16
48
P06
PDV
GHK
PDV
GHK
A_A0
136
J14
A_D10
151
E19
A_A1
135
A_A2
134
J17
A_D11
85
J18
A_D12
87
A_A3
131
K15
A_D13
A_A4
129
K18
A_A5
127
L14
A_A6
125
A_A7
122
A_A8
105
A_A9
103
A_A10
97
A_A11
100
A_A12
A_A13
A_A25
123
L19
AD7
5
E02
B_A17
36
M03
A_BVD1(STSCHG/RI)
141
H14
AD8
3
F05
B_A18
38
M05
A_BVD2(SPKR)
140
H17
AD9
2
E03
B_A19
41
N03
A_CD1
83
U11
AD10
1
D01
B_A20
44
P02
A_CD2
144
G18
AD11
173
B12
B_A21
46
P03
A_CE1
96
V14
AD12
208
A04
B_A22
49
R02
A_CE2
98
U14
AD13
207
C05
B_A23
51
R03
A_D0
145
G17
AD14
206
E06
B_A24
53
W04
A_D1
148
F18
AD15
205
B05
B_A25
55
R06
A_D2
150
F17
AD16
192
C08
B_BVD1(STSCHG/RI)
73
U09
A_D3
84
P11
AD17
191
B08
B_BVD2(SPKR)
72
V09
A_D4
86
W12
AD18
190
A08
B_CD1
15
H05
A_D5
88
U12
AD19
189
E09
B_CD2
75
P09
A_D6
90
R12
AD20
188
F09
B_CE1
27
K05
A_D7
93
U13
AD21
187
C09
B_CE2
30
L02
A_D8
146
G14
AD22
186
B09
B_D0
76
W10
A_D9
149
G15
AD23
184
F10
B_D1
78
U10
2−9
Table 2−4. 16-Bit PC Card Signal Names Sorted Alphabetically (Continued)
TERM NO.
SIGNAL NAME
PDV
GHK
B_D2
80
P10
B_D3
16
B_D4
18
B_D5
20
B_D6
B_D7
B_D8
B_D9
TERM NO.
SIGNAL NAME
PDV
GHK
C/BE2
193
F08
H03
C/BE3
164
H01
CLOCK
154
J02
DATA
155
22
J05
DEVSEL
25
K02
FRAME
77
V10
79
R10
B_D10
82
B_D11
B_D12
TERM NO.
SIGNAL NAME
GHK
—
E05
81
W11
B14
F15
PAR
203
A05
E17
PCLK
182
C10
198
F07
PERR
201
E07
194
E08
PRST
168
C13
GND
6
A06
REQ
170
A13
GND
24
A09
RI_OUT/PME
165
E13
V11
GND
43
A14
SERR
202
C06
17
H02
GND
62
E01
SPKROUT
152
F14
19
J01
GND
95
K01
STOP
200
B06
B_D13
21
J03
GND
110
P01
SUSPEND
158
C15
B_D14
23
J06
GND
147
R19
TRDY
197
C07
B_D15
26
K03
GND
166
W06
14
A07
B_INPACK
61
R07
GND
185
F19
VCC
VCC
39
A12
B_IORD
33
L05
GND
199
W14
70
G01
B_IOWR
34
M01
GNT
169
B13
VCC
VCC
91
G19
VCC
VCC
118
J19
133
N01
VCC
VCC
143
N19
174
W08
VCC
VCCA
195
W13
114
P19
47
R01
180
A10
B_OE
31
L03
GRST
177
C11
B_READY(IREQ)
69
V08
IDSEL
183
E10
B_REG
64
U07
IRDY
196
B07
B_RESET
58
W05
LATCH
153
E18
B_VS1
68
U08
MFUNC0
156
D19
B_VS2
56
P07
MFUNC1
157
A16
B_WAIT
71
W09
MFUNC2
159
E14
B_WE
45
N05
MFUNC3/IRQSER
160
F13
VCCB
VCCP
B_WP(IOIS16)
74
R09
MFUNC4
161
B15
VR_EN
29
L01
C/BE0
4
G06
MFUNC5
162
A15
VR_PORT
128
K19
C/BE1
204
F06
MFUNC6/CLKRUN
163
C14
† Terminals 81 and W11 are NC on the PCI1520 to allow for terminal compatibility with the next generation of devices.
2−10
PDV
NC
NC†
The terminals are grouped in tables by functionality, such as PCI system function, power-supply function, etc. The
terminal numbers are also listed for convenient reference.
Table 2−5. Power Supply Terminals
TERMINAL
NO.
NAME
I/O
DESCRIPTION
PDV
GHK
GND
6, 24, 43, 62,
95, 110, 147,
166, 185, 199
A06, A09, A14,
E01, F19, K01,
P01, R19, W06,
W14
−
VCC
14, 39, 70, 91,
118, 133, 143,
174, 195
A07, A12, G01,
G19, J19, N01,
N19, W08, W13
−
VCCA
114
P19
−
Clamp voltage for PC Card A interface. Matches card A signaling environment, 5 V
or 3.3 V
VCCB
47
R01
−
Clamp voltage for PC Card B interface. Matches card B signaling environment, 5 V
or 3.3 V
VCCP
VR_EN
180
A10
−
Clamp voltage for PCI and miscellaneous I/O, 5 V or 3.3 V
29
L01
I
Internal voltage regulator enable. Active-low
VR_PORT
128
K19
Device ground terminals
Power supply terminal for I/O and internal voltage regulator
I/O
Internal voltage regulator input/output. When VR_EN is low, the regulator is enabled and this terminal is an output. An external bypass capacitor is required on this
terminal. When VR_EN is high, the regulator is disabled and this terminal is an input
for an external 2.5-V core power source.
Table 2−6. PC Card Power Switch Terminals
TERMINAL
NO.
NAME
PDV
I/O
DESCRIPTION
GHK
CLOCK
154
F15
I/O
Power switch clock. Information on the DATA line is sampled at the rising edge of CLOCK. CLOCK defaults to
an input, but can be changed to a PCI1520 output by using bit 27 (P2CCLK) in the system control register
(offset 80h, see Section 4.29). The TPS222X defines the maximum frequency of this signal to be 2 MHz. However, PCI1520 requires a 16-KHz to 100-KHz frequency range. If a system design defines this terminal as an
output, then this terminal requires an external pulldown resistor. The frequency of the PCI1520 output CLOCK
is derived from the internal ring oscillator (16 KHz typical).
DATA
155
E17
O
Power switch data. DATA is used to communicate socket power control information serially to the power
switch.
LATCH
153
E18
I/O
Power switch latch. LATCH is asserted by the PCI1520 to indicate to the power switch that the data on the
DATA line is valid. When a pulldown resistor is implemented on this terminal, the MFUNC1 and MFUNC4 terminals provide the serial EEPROM SDA and SCL interface.
2−11
Table 2−7. PCI System Terminals
TERMINAL
NO.
NAME
I/O
DESCRIPTION
GHK
GRST
177
C11
I
Global reset. When the global reset is asserted, the GRST signal causes the PCI1520 to place all output
buffers in a high-impedance state and reset all internal registers. When GRST is asserted, the device is
completely in its default state. For systems that require wake-up from D3, GRST normally is asserted only
during initial boot. PRST should be asserted following initial boot so that PME context is retained during the
transition from D3 to D0. For systems that do not require wake-up from D3, GRST should be tied to PRST.
When the SUSPEND mode is enabled, the device is protected from GRST, and the internal registers are
preserved. All outputs are placed in a high-impedance state.
PCLK
182
C10
I
PCI bus clock. PCLK provides timing for all transactions on the PCI bus. All PCI signals are sampled at the
rising edge of PCLK.
I
PCI reset. When the PCI bus reset is asserted, PRST causes the PCI1520 to place all output buffers in a
high-impedance state and reset internal registers. When PRST is asserted, the device can generate the PME
signal only if it is enabled. After PRST is deasserted, the PCI1520 is in a default state.
When the SUSPEND mode is enabled, the device is protected from PRST, and the internal registers are
preserved. All outputs are placed in a high-impedance state.
PRST
2−12
PDV
168
C13
Table 2−8. PCI Address and Data Terminals
TERMINAL
NO.
NAME
I/O
DESCRIPTION
I/O
PCI address/data bus. These signals make up the multiplexed PCI address and data bus on the primary
interface. During the address phase of a primary-bus PCI cycle, AD31−AD0 contain a 32-bit address or
other destination information. During the data phase, AD31−AD0 contain data.
B14
F08
F06
G06
I/O
PCI-bus commands and byte enables. These signals are multiplexed on the same PCI terminals. During
the address phase of a primary-bus PCI cycle, C/BE3−C/BE0 define the bus command. During the data
phase, this 4-bit bus is used as byte enables. The byte enables determine which byte paths of the full 32-bit
data bus carry meaningful data. C/BE0 applies to byte 0 (AD7−AD0), C/BE1 applies to byte 1 (AD15−AD8),
C/BE2 applies to byte 2 (AD23−AD16), and C/BE3 applies to byte 3 (AD31−AD24).
A05
I/O
PCI-bus parity. In all PCI-bus read and write cycles, the PCI1520 calculates even parity across the
AD31−AD0 and C/BE3−C/BE0 buses. As an initiator during PCI cycles, the PCI1520 outputs this parity
indicator with a one-PCLK delay. As a target during PCI cycles, the PCI1520 compares its calculated parity
to the parity indicator of the initiator. A compare error results in the assertion of a parity error (PERR).
PDV
GHK
AD31
AD30
AD29
AD28
AD27
AD26
AD25
AD24
AD23
AD22
AD21
AD20
AD19
AD18
AD17
AD16
AD15
AD14
AD13
AD12
AD11
AD10
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
171
172
175
176
178
179
167
181
184
186
187
188
189
190
191
192
205
206
207
208
173
1
2
3
5
7
8
9
10
11
12
13
E12
C12
A11
B11
E11
F11
F12
B10
F10
B09
C09
F09
E09
A08
B08
C08
B05
E06
C05
A04
B12
D01
E03
F05
E02
F03
F02
G05
F01
H06
G03
G02
C/BE3
C/BE2
C/BE1
C/BE0
164
193
204
4
PAR
203
2−13
Table 2−9. PCI Interface Control Terminals
TERMINAL
NO.
I/O
DESCRIPTION
F07
I/O
PCI device select. The PCI1520 asserts DEVSEL to claim a PCI cycle as the target device. As a PCI initiator
on the bus, the PCI1520 monitors DEVSEL until a target responds. If no target responds before timeout
occurs, then the PCI1520 terminates the cycle with an initiator abort.
194
E08
I/O
PCI cycle frame. FRAME is driven by the initiator of a bus cycle. FRAME is asserted to indicate that a bus
transaction is beginning, and data transfers continue while this signal is asserted. When FRAME is
deasserted, the PCI bus transaction is in the final data phase.
GNT
169
B13
I
PCI bus grant. GNT is driven by the PCI bus arbiter to grant the PCI1520 access to the PCI bus after the
current data transaction has completed. GNT may or may not follow a PCI bus request, depending on the PCI
bus parking algorithm.
IDSEL
183
E10
I
Initialization device select. IDSEL selects the PCI1520 during configuration space accesses. IDSEL can be
connected to one of the upper 24 PCI address lines on the PCI bus.
IRDY
196
B07
I/O
PCI initiator ready. IRDY indicates the ability of the PCI bus initiator to complete the current data phase of the
transaction. A data phase is completed on a rising edge of PCLK where both IRDY and TRDY are asserted.
Until IRDY and TRDY are both sampled asserted, wait states are inserted.
PERR
201
E07
I/O
PCI parity error indicator. PERR is driven by a PCI device to indicate that calculated parity does not match
PAR when PERR is enabled through bit 6 of the command register (PCI offset 04h, see Section 4.4).
REQ
170
A13
O
PCI bus request. REQ is asserted by the PCI1520 to request access to the PCI bus as an initiator.
NAME
PDV
GHK
DEVSEL
198
FRAME
2−14
SERR
202
C06
O
PCI system error. SERR is an output that is pulsed from the PCI1520 when enabled through bit 8 of the
command register (PCI offset 04h, see Section 4.4) indicating a system error has occurred. The PCI1520
need not be the target of the PCI cycle to assert this signal. When SERR is enabled in the command register,
this signal also pulses, indicating that an address parity error has occurred on a CardBus interface.
STOP
200
B06
I/O
PCI cycle stop signal. STOP is driven by a PCI target to request the initiator to stop the current PCI bus
transaction. STOP is used for target disconnects and is commonly asserted by target devices that do not
support burst data transfers.
TRDY
197
C07
I/O
PCI target ready. TRDY indicates the ability of the primary bus target to complete the current data phase of
the transaction. A data phase is completed on a rising edge of PCLK when both IRDY and TRDY are asserted.
Until both IRDY and TRDY are asserted, wait states are inserted.
Table 2−10. Multifunction and Miscellaneous Terminals
TERMINAL
NO.
NAME
MFUNC0
PDV
GHK
156
D19
I/O
DESCRIPTION
I/O
Multifunction terminal 0. MFUNC0 can be configured as parallel PCI interrupt INTA, GPI0, GPO0, socket
activity LED output, ZV switching output, CardBus audio PWM, GPE, or a parallel IRQ. See
Section 4.30, Multifunction Routing Register, for configuration details.
Multifunction terminal 1. MFUNC1 can be configured as parallel PCI interrupt INTB, GPI1, GPO1, socket
activity LED output, ZV switching output, CardBus audio PWM, GPE, or a parallel IRQ. See
Section 4.30, Multifunction Routing Register, for configuration details.
MFUNC1
157
A16
I/O
MFUNC2
159
E14
I/O
Multifunction terminal 2. MFUNC2 can be configured as GPI2, GPO2, socket activity LED output, ZV
switching output, CardBus audio PWM, GPE, RI_OUT, D3_STAT, or a parallel IRQ. See Section 4.30,
Multifunction Routing Register, for configuration details.
MFUNC3/
IRQSER
160
F13
I/O
Multifunction terminal 3. MFUNC3 can be configured as a parallel IRQ or the serialized interrupt signal
IRQSER. This terminal is IRQSER by default. See Section 4.30, Multifunction Routing Register, for
configuration details.
Serial data (SDA). When LATCH is detected low after the deassertion of GRST, the MFUNC1 terminal
provides the SDA signaling for the serial bus interface. The two-terminal serial interface loads the
subsystem identification and other register defaults from an EEPROM after a PCI reset. See
Section 3.6.1, Serial Bus Interface Implementation, for details on other serial bus applications.
Multifunction terminal 4. MFUNC4 can be configured as PCI LOCK, GPI3, GPO3, socket activity LED
output, ZV switching output, CardBus audio PWM, GPE, D3_STAT, RI_OUT, or a parallel IRQ. See
Section 4.30, Multifunction Routing Register, for configuration details.
MFUNC4
161
B15
I/O
MFUNC5
162
A15
I/O
Multifunction terminal 5. MFUNC5 can be configured as GPI4, GPO4, socket activity LED output, ZV
switching output, CardBus audio PWM, D3_STAT, GPE, or a parallel IRQ. See Section 4.30,
Multifunction Routing Register, for configuration details.
MFUNC6/
CLKRUN
163
C14
I/O
Multifunction terminal 6. MFUNC6 can be configured as a PCI CLKRUN or a parallel IRQ. See
Section 4.30, Multifunction Routing Register, for configuration details.
NC
—
81
E05
W11
RI_OUT/PME
165
E13
O
Ring indicate out and power management event output. This terminal provides an output for ring-indicate
or PME signals.
SPKROUT
152
F14
O
Speaker output. SPKROUT is the output to the host system that can carry SPKR or CAUDIO through
the PCI1520 from the PC Card interface. SPKROUT is driven as the exclusive-OR combination of card
SPKR//CAUDIO inputs.
SUSPEND
158
C15
I
Suspend. SUSPEND protects the internal registers from clearing when the GRST or PRST signal is
asserted. See Section 3.8.5, Suspend Mode, for details.
Serial clock (SCL). When LATCH is detected low after the deassertion of GRST, the MFUNC4 terminal
provides the SCL signaling for the serial bus interface. The two-terminal serial interface loads the
subsystem identification and other register defaults from an EEPROM after a PCI reset. See
Section 3.6.1, Serial Bus Interface Implementation, for details on other serial bus applications.
No connect. These terminals have no connection anywhere within the package. Terminal E05 on the
GHK package is used as a key to indicate the location of the A1 corner of the BGA package. Terminals
W11 on the GHK package and 81 on the PDV package will be used as a 48-MHz clock input on
future-generation devices.
2−15
Table 2−11. 16-Bit PC Card Address and Data Terminals (Slots A and B)
TERMINAL
NUMBER
NAME
SLOT A†
SLOT B‡
I/O
DESCRIPTION
PDV
GHK
PDV
GHK
A25
A24
A23
A22
A21
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
123
121
119
116
113
111
108
106
104
115
117
109
107
120
100
97
103
105
122
125
127
129
131
134
135
136
L19
M18
M15
N17
N15
P17
N14
R17
W16
M14
N18
R18
P15
M17
P14
R13
U15
T19
M19
L17
L14
K18
K15
J18
J17
J14
55
53
51
49
46
44
41
38
36
48
50
42
40
52
32
28
35
37
54
57
59
60
63
65
66
67
R06
W04
R03
R02
P03
P02
N03
M05
M03
P06
P05
N06
N02
T01
L06
K06
M02
M06
U05
V05
U06
V06
P08
V07
W07
R08
O
PC Card address. 16-bit PC Card address lines. A25 is the most significant bit.
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
94
92
89
87
85
151
149
146
93
90
88
86
84
150
148
145
P13
V13
P12
V12
R11
E19
G15
G14
U13
R12
U12
W12
P11
F17
F18
G17
26
23
21
19
17
82
79
77
25
22
20
18
16
80
78
76
K03
J06
J03
J01
H02
V11
R10
V10
K02
J05
J02
H01
H03
P10
U10
W10
I/O
PC Card data. 16-bit PC Card data lines. D15 is the most significant bit.
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 123 and L19 is A_A25.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 55 and R06 is B_A25.
2−16
Table 2−12. 16-Bit PC Card Interface Control Terminals (Slots A and B)
TERMINAL
NUMBER
NAME
SLOT A†
PDV
BVD1
(STSCHG/RI)
141
GHK
H14
SLOT B‡
PDV
73
I/O
DESCRIPTION
GHK
U09
I
Battery voltage detect 1. BVD1 is generated by 16-bit memory PC Cards that
include batteries. BVD1 is used with BVD2 as an indication of the condition of the
batteries on a memory PC Card. Both BVD1 and BVD2 are high when the battery
is good. When BVD2 is low and BVD1 is high, the battery is weak and should be
replaced. When BVD1 is low, the battery is no longer serviceable and the data in
the memory PC Card is lost. See Section 5.6, ExCA Card Status-Change Interrupt
Configuration Register, for enable bits. See Section 5.5, ExCA Card
Status-Change Register, and Section 5.2, ExCA Interface Status Register, for the
status bits for this signal.
Status change. STSCHG is used to alert the system to a change in the READY,
write protect, or battery voltage dead condition of a 16-bit I/O PC Card.
Ring indicate. RI is used by 16-bit modem cards to indicate a ring detection.
BVD2
(SPKR)
140
H17
72
V09
I
Battery voltage detect 2. BVD2 is generated by 16-bit memory PC Cards that
include batteries. BVD2 is used with BVD1 as an indication of the condition of the
batteries on a memory PC Card. Both BVD1 and BVD2 are high when the battery
is good. When BVD2 is low and BVD1 is high, the battery is weak and should be
replaced. When BVD1 is low, the battery is no longer serviceable and the data in
the memory PC Card is lost. See Section 5.6, ExCA Card Status-Change Interrupt
Configuration Register, for enable bits. See Section 5.5, ExCA Card
Status-Change Register, and Section 5.2, ExCA Interface Status Register, for the
status bits for this signal.
Speaker. SPKR is an optional binary audio signal available only when the card and
socket have been configured for the 16-bit I/O interface. The audio signals from
cards A and B are combined by the PCI1520 and are output on SPKROUT.
CD1
CD2
83
144
U11
G18
15
75
H05
P09
I
Card detect 1 and card detect 2. CD1 and CD2 are internally connected to ground
on the PC Card. When a PC Card is inserted into a socket, CD1 and CD2 are pulled
low. For signal status, see Section 5.2, ExCA Interface Status Register.
CE1
CE2
96
98
V14
U14
27
30
K05
L02
O
Card enable 1 and card enable 2. CE1 and CE2 enable even- and odd-numbered
address bytes. CE1 enables even-numbered address bytes, and CE2 enables
odd-numbered address bytes.
INPACK
130
K17
61
R07
I
Input acknowledge. INPACK is asserted by the PC Card when it can respond to an
I/O read cycle at the current address.
IORD
101
V15
33
L05
O
I/O read. IORD is asserted by the PCI1520 to enable 16-bit I/O PC Card data output
during host I/O read cycles.
IOWR
102
R14
34
M01
O
I/O write. IOWR is driven low by the PCI1520 to strobe write data into 16-bit I/O PC
Cards during host I/O write cycles.
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 130 and K17 is A_INPACK.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 61 and R07 is B_INPACK.
2−17
Table 2−12. 16-Bit PC Card Interface Control Terminals (Slots A and B) (Continued)
TERMINAL
NUMBER
NAME
OE
READY
(IREQ)
SLOT A†
SLOT B‡
PDV
GHK
PDV
GHK
99
W15
31
L03
138
H19
69
V08
I/O
DESCRIPTION
O
Output enable. OE is driven low by the PCI1520 to enable 16-bit memory PC Card data
output during host memory read cycles.
I
Ready. The ready function is provided by READY when the 16-bit PC Card and the host
socket are configured for the memory-only interface. READY is driven low by 16-bit memory
PC Cards to indicate that the memory card circuits are busy processing a previous write
command. READY is driven high when the 16-bit memory PC Card is ready to accept a new
data transfer command.
Interrupt request. IREQ is asserted by a 16-bit I/O PC Card to indicate to the host that a
device on the 16-bit I/O PC Card requires service by the host software. IREQ is high
(deasserted) when no interrupt is requested.
REG
132
K14
64
U07
O
Attribute memory select. REG remains high for all common memory accesses. When REG
is asserted, access is limited to attribute memory (OE or WE active) and to the I/O space
(IORD or IOWR active). Attribute memory is a separately accessed section of card memory
and is generally used to record card capacity and other configuration and attribute
information.
RESET
126
L15
58
W05
O
PC Card reset. RESET forces a hard reset to a 16-bit PC Card.
VS1
VS2
137
124
J15
L18
68
56
U08
P07
I/O
Voltage sense 1 and voltage sense 2. VS1 and VS2, when used in conjunction with each
other, determine the operating voltage of the PC Card.
WAIT
139
H18
71
W09
I
Bus cycle wait. WAIT is driven by a 16-bit PC Card to extend the completion of the memory
or I/O cycle in progress.
WE
112
P18
45
N05
O
Write enable. WE is used to strobe memory write data into 16-bit memory PC Cards. WE
is also used for memory PC Cards that employ programmable memory technologies.
WP
(IOIS16)
142
H15
74
R09
I
Write protect. WP applies to 16-bit memory PC Cards. WP reflects the status of the
write-protect switch on 16-bit memory PC Cards. For 16-bit I/O cards, WP is used for the
16-bit port (IOIS16) function.
I/O is 16 bits. IOIS16 applies to 16-bit I/O PC Cards. IOIS16 is asserted by the 16-bit PC Card
when the address on the bus corresponds to an address to which the 16-bit PC Card
responds, and the I/O port that is addressed is capable of 16-bit accesses.
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 112 and P18 is A_WE.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 45 and N05 is B_WE.
2−18
Table 2−13. CardBus PC Card Interface System Terminals (Slots A and B)
TERMINAL
NUMBER
NAME
SLOT A†
PDV
GHK
SLOT B‡
PDV
I/O
DESCRIPTION
GHK
CCLK
115
M14
48
P06
O
CardBus clock. CCLK provides synchronous timing for all transactions on the
CardBus interface. All signals except CRST, CCLKRUN, CINT, CSTSCHG, CAUDIO,
CCD2, CCD1, CVS2, and CVS1 are sampled on the rising edge of CCLK, and all
timing parameters are defined with the rising edge of this signal. CCLK operates at
the PCI bus clock frequency, but it can be stopped in the low state or slowed down
for power savings.
CCLKRUN
142
H15
74
R09
I/O
CardBus clock run. CCLKRUN is used by a CardBus PC Card to request an increase
in the CCLK frequency, and by the PCI1520 to indicate that the CCLK frequency is
going to be decreased.
O
CardBus reset. CRST brings CardBus PC Card-specific registers, sequencers, and
signals to a known state. When CRST is asserted, all CardBus PC Card signals are
placed in a high-impedance state, and the PCI1520 drives these signals to a valid
logic level. Assertion can be asynchronous to CCLK, but deassertion must be
synchronous to CCLK.
CRST
126
L15
58
W05
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 115 and M14 is A_CCLK.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 48 and P06 is B_CCLK.
2−19
Table 2−14. CardBus PC Card Address and Data Terminals (Slots A and B)
TERMINAL
NUMBER
NAME
SLOT A†
SLOT B‡
PDV
GHK
PDV
GHK
CAD31
CAD30
CAD29
CAD28
CAD27
CAD26
CAD25
CAD24
CAD23
CAD22
CAD21
CAD20
CAD19
CAD18
CAD17
CAD16
CAD15
CAD14
CAD13
CAD12
CAD11
CAD10
CAD9
CAD8
CAD7
CAD6
CAD5
CAD4
CAD3
CAD2
CAD1
CAD0
151
149
148
146
145
136
135
134
131
129
127
125
123
122
121
104
102
103
101
100
99
98
97
94
93
89
90
87
88
85
86
84
E19
G15
F18
G14
G17
J14
J17
J18
K15
K18
L14
L17
L19
M19
M18
W16
R14
U15
V15
P14
W15
U14
R13
P13
U13
P12
R12
V12
U12
R11
W12
P11
82
79
78
77
76
67
66
65
63
60
59
57
55
54
53
36
34
35
33
32
31
30
28
26
25
21
22
19
20
17
18
16
V11
R10
U10
V10
W10
R08
W07
V07
P08
V06
U06
V05
R06
U05
W04
M03
M01
M02
L05
L06
L03
L02
K06
K03
K02
J03
J05
J01
J02
H02
H01
H03
CC/BE3
CC/BE2
CC/BE1
CC/BE0
132
120
105
96
K14
M17
T19
V14
64
52
37
27
U07
T01
M06
K05
CPAR
107
P15
40
N02
I/O
DESCRIPTION
I/O
CardBus address and data. These signals make up the multiplexed CardBus address
and data bus on the CardBus interface. During the address phase of a CardBus cycle,
CAD31−CAD0 contain a 32-bit address. During the data phase of a CardBus cycle,
CAD31−CAD0 contain data. CAD31 is the most significant bit.
I/O
CardBus bus commands and byte enables. CC/BE3−CC/BE0 are multiplexed on the
same CardBus terminals. During the address phase of a CardBus cycle,
CC/BE3−CC/BE0 define the bus command. During the data phase, this 4-bit bus is used
as byte enables. The byte enables determine which byte paths of the full 32-bit data bus
carry meaningful data. CC/BE0 applies to byte 0 (CAD7−CAD0), CC/BE1 applies to
byte 1 (CAD15−CAD8), CC/BE2 applies to byte 2 (CAD23−CAD16), and CC/BE3
applies to byte 3 (CAD31−CAD24).
I/O
CardBus parity. In all CardBus read and write cycles, the PCI1520 calculates even parity
across the CAD and CC/BE buses. As an initiator during CardBus cycles, the PCI1520
outputs CPAR with a one-CCLK delay. As a target during CardBus cycles, the PCI1520
compares its calculated parity to the parity indicator of the initiator; a compare error
results in a parity error assertion.
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 107 and P15 is A_CPAR.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 40 and N02 is B_CPAR.
2−20
Table 2−15. CardBus PC Card Interface Control Terminals (Slots A and B)
TERMINAL
NUMBER
NAME
SLOT A†
SLOT B‡
I/O
DESCRIPTION
CardBus audio. CAUDIO is a digital input signal from a PC Card to the system
speaker. The PCI1520 supports the binary audio mode and outputs a binary signal
from the card to SPKROUT.
PDV
GHK
PDV
GHK
CAUDIO
140
H17
72
V09
I
CBLOCK
108
N14
41
N03
I/O
CCD1
CCD2
83
144
U11
G18
15
75
H05
P09
I
CardBus detect 1 and CardBus detect 2. CCD1 and CCD2 are used in conjunction
with CVS1 and CVS2 to identify card insertion and interrogate cards to determine the
operating voltage and card type.
CardBus lock. CBLOCK is used to gain exclusive access to a target.
CDEVSEL
113
N15
46
P03
I/O
CardBus device select. The PCI1520 asserts CDEVSEL to claim a CardBus cycle as
the target device. As a CardBus initiator on the bus, the PCI1520 monitors CDEVSEL
until a target responds. If no target responds before timeout occurs, then the PCI1520
terminates the cycle with an initiator abort.
CFRAME
119
M15
51
R03
I/O
CardBus cycle frame. CFRAME is driven by the initiator of a CardBus bus cycle.
CFRAME is asserted to indicate that a bus transaction is beginning, and data
transfers continue while this signal is asserted. When CFRAME is deasserted, the
CardBus bus transaction is in the final data phase.
CGNT
112
P18
45
N05
O
CardBus bus grant. CGNT is driven by the PCI1520 to grant a CardBus PC Card
access to the CardBus bus after the current data transaction has been completed.
CINT
138
H19
69
V08
I
CardBus interrupt. CINT is asserted low by a CardBus PC Card to request interrupt
servicing from the host.
CIRDY
117
N18
50
P05
I/O
CardBus initiator ready. CIRDY indicates the ability of the CardBus initiator to
complete the current data phase of the transaction. A data phase is completed on a
rising edge of CCLK when both CIRDY and CTRDY are asserted. Until CIRDY and
CTRDY are both sampled asserted, wait states are inserted.
CPERR
109
R18
42
N06
I/O
CardBus parity error. CPERR reports parity errors during CardBus transactions,
except during special cycles. It is driven low by a target two clocks following the data
cycle during which a parity error is detected.
CREQ
130
K17
61
R07
I
CardBus request. CREQ indicates to the arbiter that the CardBus PC Card desires
use of the CardBus bus as an initiator.
CSERR
139
H18
71
W09
I
CardBus system error. CSERR reports address parity errors and other system errors
that could lead to catastrophic results. CSERR is driven by the card synchronous to
CCLK, but deasserted by a weak pullup; deassertion may take several CCLK periods.
The PCI1520 can report CSERR to the system by assertion of SERR on the PCI
interface.
CSTOP
111
P17
44
P02
I/O
CardBus stop. CSTOP is driven by a CardBus target to request the initiator to stop
the current CardBus transaction. CSTOP is used for target disconnects, and is
commonly asserted by target devices that do not support burst data transfers.
CSTSCHG
141
H14
73
U09
I
CardBus status change. CSTSCHG alerts the system to a change in the card status,
and is used as a wake-up mechanism.
CTRDY
116
N17
49
R02
I/O
CardBus target ready. CTRDY indicates the ability of the CardBus target to complete
the current data phase of the transaction. A data phase is completed on a rising edge
of CCLK, when both CIRDY and CTRDY are asserted; until this time, wait states are
inserted.
CVS1
CVS2
137
124
J15
L18
68
56
U08
P07
I/O
CardBus voltage sense 1 and CardBus voltage sense 2. CVS1 and CVS2 are used
in conjunction with CCD1 and CCD2 to identify card insertion and interrogate cards
to determine the operating voltage and card type.
† Terminal name for slot A is preceded with A_. For example, the full name for terminals 140 and H18 is A_CAUDIO.
‡ Terminal name for slot B is preceded with B_. For example, the full name for terminals 72 and V09 is B_CAUDIO.
2−21
2−22
3 Feature/Protocol Descriptions
The following sections give an overview of the PCI1520. Figure 3−1 shows a simplified block diagram of the PCI1520.
The PCI interface includes all address/data and control signals for PCI protocol. The interrupt interface includes
terminals for parallel PCI, parallel ISA, and serialized PCI and ISA signaling. Miscellaneous system interface
terminals include multifunction terminals: SUSPEND, RI_OUT/PME (power management control signal), and
SPKROUT.
PCI Bus
INTA
Activity LEDs
INTB
TPS222X
Power Switch
3
IRQSER
PCI1520
PCI950
IRQSER
Deserializer
Interrupt
Controller
IRQ2−15
3
PC Card
Socket A
68
Zoomed Video
68
68
23
68
23
19
VGA
Controller
Multiplexer
PC Card
Socket B
Zoomed Video
External ZV Port
23
4
Audio
Subsystem
NOTE: The PC Card interface is 68 terminals for CardBus and 16-bit PC Cards. In zoomed video mode 23 terminals are used for routing the
zoomed video signals to the VGA controller and audio subsystem.
Figure 3−1. PCI1520 Simplified Block Diagram
3.1 Power Supply Sequencing
The PCI1520 contains 3.3-V I/O buffers with 5-V tolerance requiring an I/O power supply and an LDO-VR power
supply for core logic. The core power supply, which is always 2.5 V, can be supplied through the VR_PORT terminal
(when VR_EN is high) or from the integrated LDO-VR. The LDO-VR needs a 3.3-V power supply via the VCC
terminals. The clamping voltages (VCCA, VCCB, and VCCP) can be either 3.3 V or 5 V, depending on the interface. The
following power-up and power-down sequences are recommended.
The power-up sequence is:
1. Assert GRST to the device to disable the outputs during power up. Output drivers must be powered up in
the high-impedance state to prevent high current levels through the clamp diodes to the 5-V clamping rails
(VCCA, VCCB, and VCCP).
2. Apply 3.3-V power to VCC.
3. Apply the clamp voltage.
3−1
The power-down sequence is:
1. Assert GRST to the device to disable the outputs during power down. Output drivers must be powered down
in the high-impedance state to prevent high current levels through the clamp diodes to the 5-V clamping
rails (VCCA, VCCB, and VCCP).
2. Remove the clamp voltage.
3. Remove the 3.3-V power from VCC.
NOTE: The clamp voltage can be ramped up or ramped down along with the 3.3-V power. The
voltage difference between VCC and the clamp voltage must remain within 3.6 V.
3.2 I/O Characteristics
Figure 3−2 shows a 3-state bidirectional buffer. Section 7.2, Recommended Operating Conditions, provides the
electrical characteristics of the inputs and outputs.
NOTE: The PCI1520 meets the ac specifications of the 1997 PC Card Standard and PCI Local
Bus Specification.
VCCP
Tied for Open Drain
OE
Pad
Figure 3−2. 3-State Bidirectional Buffer
NOTE: Unused terminals (input or I/O) must be held high or low to prevent them from floating.
3.3 Clamping Voltages
The clamping voltages are set to match whatever external environment the PCI1520 is interfaced with, 3.3 V or 5 V.
The I/O sites can be pulled through a clamping diode to a voltage rail that protects the core from external signals.
The core power supply is always 3.3 V and is independent of the clamping voltages. For example, PCI signaling can
be either 3.3 V or 5 V, and the PCI1520 must reliably accommodate both voltage levels. This is accomplished by using
a 3.3-V I/O buffer that is 5-V tolerant, with the applicable clamping voltage applied. If a system designer desires a
5-V PCI bus, then VCCP can be connected to a 5-V power supply.
The PCI1520 requires three separate clamping voltages because it supports a wide range of features. The three
voltages are listed and defined in Section 7.2, Recommended Operating Conditions. GRST, SUSPEND, PME, and
CSTSCHG are not clamped to any of them.
3.4 Peripheral Component Interconnect (PCI) Interface
The PCI1520 is fully compliant with the PCI Local Bus Specification. The PCI1520 provides all required signals for
PCI master or slave operation, and may operate in either a 5-V or 3.3-V signaling environment by connecting the VCCP
terminal to the desired voltage level. In addition to the mandatory PCI signals, the PCI1520 provides the optional
interrupt signals INTA and INTB.
3.4.1
PCI GRST Signal
During the power-up sequence, GRST and PRST must be asserted. GRST can only be deasserted 100 µs after PCLK
is stable. PRST can be deasserted at the same time as GRST or any time thereafter.
3−2
3.4.2
PCI Bus Lock (LOCK)
The bus-locking protocol defined in the PCI Local Bus Specification is not highly recommended, but is provided on
the PCI1520 as an additional compatibility feature. The PCI LOCK signal can be routed to the MFUNC4 terminal by
setting the appropriate values in bits 19−16 of the multifunction routing register. See Section 4.30, Multifunction
Routing Register, for details. Note that the use of LOCK is only supported by PCI-to-CardBus bridges in the
downstream direction (away from the processor).
PCI LOCK indicates an atomic operation that may require multiple transactions to complete. When LOCK is asserted,
nonexclusive transactions can proceed to an address that is not currently locked. A grant to start a transaction on
the PCI bus does not guarantee control of LOCK; control of LOCK is obtained under its own protocol. It is possible
for different initiators to use the PCI bus while a single master retains ownership of LOCK. Note that the CardBus
signal for this protocol is CBLOCK to avoid confusion with the bus clock.
An agent may need to do an exclusive operation because a critical access to memory might be broken into several
transactions, but the master wants exclusive rights to a region of memory. The granularity of the lock is defined by
PCI to be 16 bytes, aligned. The LOCK protocol defined by the PCI Local Bus Specification allows a resource lock
without interfering with nonexclusive real-time data transfer, such as video.
The PCI bus arbiter may be designed to support only complete bus locks using the LOCK protocol. In this scenario,
the arbiter will not grant the bus to any other agent (other than the LOCK master) while LOCK is asserted. A complete
bus lock may have a significant impact on the performance of the video. The arbiter that supports complete bus lock
must grant the bus to the cache to perform a writeback due to a snoop to a modified line when a locked operation
is in progress.
The PCI1520 supports all LOCK protocol associated with PCI-to-PCI bridges, as also defined for PCI-to-CardBus
bridges. This includes disabling write posting while a locked operation is in progress, which can solve a potential
deadlock when using devices such as PCI-to-PCI bridges. The potential deadlock can occur if a CardBus target
supports delayed transactions and blocks access to the target until it completes a delayed read. This target
characteristic is prohibited by the PCI Local Bus Specification, and the issue is resolved by the PCI master using
LOCK.
3.4.3
Loading Subsystem Identification
The subsystem vendor ID register (PCI offset 40h, see Section 4.26) and subsystem ID register (PCI offset 42h, see
Section 4.27) make up a doubleword of PCI configuration space for functions 0 and 1. This doubleword register is
used for system and option card (mobile dock) identification purposes and is required by some operating systems.
Implementation of this unique identifier register is a PC 99/PC 2001 requirement.
The PCI1520 offers two mechanisms to load a read-only value into the subsystem registers. The first mechanism
relies upon the system BIOS providing the subsystem ID value. The default access mode to the subsystem registers
is read-only, but can be made read/write by clearing bit 5 (SUBSYSRW) in the system control register (PCI offset 80h,
see Section 4.29). Once this bit is cleared, the BIOS can write a subsystem identification value into the registers at
PCI offset 40h. The BIOS must set the SUBSYSRW bit such that the subsystem vendor ID register and subsystem
ID register is limited to read-only access. This approach saves the added cost of implementing the serial electrically
erasable programmable ROM (EEPROM).
In some conditions, such as in a docking environment, the subsystem vendor ID register and subsystem ID register
must be loaded with a unique identifier via a serial EEPROM. The PCI1520 loads the data from the serial EEPROM
after a reset of the primary bus. Note that the SUSPEND input gates the PCI reset from the entire PCI1520 core,
including the serial-bus state machine (see Section 3.8.5, Suspend Mode, for details on using SUSPEND).
The PCI1520 provides a two-line serial-bus host controller that can interface to a serial EEPROM. See Section 3.6,
Serial-Bus Interface, for details on the two-wire serial-bus controller and applications.
3−3
3.5 PC Card Applications
This section describes the PC Card interfaces of the PCI1520.
•
•
•
•
•
•
3.5.1
Card insertion/removal and recognition
P2C power-switch interface
Zoomed video support
Speaker and audio applications
LED socket activity indicators
CardBus socket registers
PC Card Insertion/Removal and Recognition
The PC Card Standard (release 7.1) addresses the card-detection and recognition process through an interrogation
procedure that the socket must initiate on card insertion into a cold, nonpowered socket. Through this interrogation,
card voltage requirements and interface (16-bit versus CardBus) are determined.
The scheme uses the card-detect and voltage-sense signals. The configuration of these four terminals identifies the
card type and voltage requirements of the PC Card interface. The encoding scheme is defined in the PC Card
Standard (release 7.1) and in Table 3−1.
Table 3−1. PC Card Card-Detect and Voltage-Sense Connections
CD2//CCD2
CD1//CCD1
VS2//CVS2
VS1//CVS1
KEY
INTERFACE
VOLTAGE
Ground
Ground
Open
Open
5V
16-bit PC Card
5V
Ground
Ground
Open
Ground
5V
16-bit PC Card
5 V and 3.3 V
Ground
Ground
Ground
Ground
5V
16-bit PC Card
5 V, 3.3 V, and X.X V
Ground
Ground
Open
Ground
LV
16-bit PC Card
3.3 V
Ground
Connect to CVS1
Open
Connect to CCD1
LV
CardBus PC Card
3.3 V
Ground
Ground
Ground
Ground
LV
16-bit PC Card
3.3 V and X.X V
Connect to CVS2
Ground
Connect to CCD2
Ground
LV
CardBus PC Card
3.3 V and X.X V
Connect to CVS1
Ground
Ground
Connect to CCD2
LV
CardBus PC Card
3.3 V, X.X V, and Y.Y V
X.X V
Ground
Ground
Ground
Open
LV
16-bit PC Card
Connect to CVS2
Ground
Connect to CCD2
Open
LV
CardBus PC Card
X.X V
Ground
Connect to CVS2
Connect to CCD1
Open
LV
CardBus PC Card
X.X V and Y.Y V
LV
CardBus PC Card
Y.Y V
Connect to CVS1
Ground
Open
Connect to CCD2
Ground
Connect to CVS1
Ground
Connect to CCD1
Reserved
Ground
Connect to CVS2
Connect to CCD1
Ground
Reserved
3.5.2
P2C Power-Switch Interface (TPS222X)
The PCI1520 provides a PCMCIA peripheral control (P2C) interface for control of the PC Card power switch. The
CLOCK, DATA, and LATCH terminals interface with the TI TPS222X dual-slot PC Card power interface switches to
provide power switch support. Figure 3−3 illustrates a typical application where the PCI1520 represents the PCMCIA
controller. Table 3−2 shows the available power switch options compatible with the PCI1520.
3−4
Power Supply
12 V
5V
3.3 V
12 V
5V
3.3 V
TPS222X
Supervisor
RESET
RESET
PCI1520
(PCMCIA
Controller)
CLOCK
DATA
LATCH
AVPP
AVCC
AVCC
VPP1
VPP2
VCC
VCC
PC Card
A
VPP1
VPP2
VCC
VCC
PC Card
B
AVCC
BVPP
BVCC
BVCC
BVCC
Figure 3−3. TPS222X Typical Application
Table 3−2. Power Switch Options
DEVICE
TPS2206
TPS2214(A)
TPS2216(A)
TPS2223†‡
TPS2224†
TPS2226†
PIN-COMPATIBLE REPLACEMENT(S)
TPS2226IDB† – 30-pin SSOP
TPS2216ADAP – 32-pin TSSOP
TPS2224IDB† – 24-pin SSOP
TPS2226IDB† – 30 pin SSOP
N/A − Check for newer device
N/A − Check for newer device
N/A − Check for newer device
† Recommended for new designs
‡ For applications not requiring 12 volts
The CLOCK terminal on the PCI1520 can be an input or an output. The PCI1520 defaults the CLOCK terminal as
an input to control the serial interface and the internal state machine. Bit 27 (P2CCLK) in the system control register
(offset 80h, see Section 4.29) can be set by the platform BIOS or the serial EEPROM to enable the PCI1520 to
generate and drive CLOCK internally from the PCI clock. When the system design implements CLOCK as an output
from the PCI1520, an external pulldown resistor is required.
3.5.3
Zoomed Video Support
The PCI1520 allows for the implementation of zoomed video (ZV) for PC Cards. Zoomed video is supported by setting
bit 6 (ZVENABLE) in the card control register (PCI offset 91h, see Section 4.32) on a per-socket function basis.
Setting this bit puts 16-bit PC Card address lines A25−A4 of the PC Card interface in the high-impedance state. These
lines can then transfer video and audio data directly to the appropriate controller. Card address lines A3−A0 can still
access PC Card CIS registers for PC Card configuration. Figure 3−4 illustrates a PCI1520 ZV implementation.
3−5
Speakers
CRT
Motherboard
PCI Bus
VGA
Controller
Audio
Codec
Zoomed Video
Port
19
PCM
Audio
Input
PC Card
19
4
PC Card
Interface
PCI1520
Video
Audio
4
Figure 3−4. Zoomed Video Implementation Using the PCI1520
Not shown in Figure 3−4 is the multiplexing scheme used to route either socket 0 or socket 1 ZV source to the graphics
controller. The PCI1520 provides ZVSTAT, ZVSEL0, and ZVSEL1 signals on the multifunction terminals to switch
external bus drivers. Figure 3−5 shows an implementation for switching between three ZV streams using external
logic.
2
PCI1520
ZVSTAT
ZVSEL0
ZVSEL1
0
1
Figure 3−5. Zoomed Video Switching Application
Figure 3−5 illustrates an implementation using standard three-state bus drivers with active-low output enables.
ZVSEL0 is an active-low output indicating that the socket 0 ZV mode is enabled, and ZVSEL1 is an active-low output
indicating that socket 1 ZV is enabled. When both sockets have ZV mode enabled, the PCI1520 by defaults indicates
socket 0 enabled through ZVSEL0; however, bit 5 (PORT_SEL) in the card control register (see Section 4.32) allows
software to select the socket ZV source priority. Table 3−3 illustrates the functionality of the ZV output signals.
3−6
Table 3−3. Functionality of the ZV Output Signals
INPUTS
OUTPUTS
PORTSEL
SOCKET 0 ENABLE
SOCKET 1 ENABLE
ZVSEL0
ZVSEL1
ZVSTAT
X
0
0
1
1
0
0
1
X
0
1
1
0
0
1
1
0
1
1
X
1
1
0
1
1
1
0
0
1
1
Also shown in Figure 3−5 is a third ZV input that can be provided from a source such as a high-speed serial bus like
IEEE 1394. The ZVSTAT signal provides a mechanism to switch the third ZV source. ZVSTAT is an active-high output
indicating that one of the PCI1520 sockets is enabled for ZV mode. The implementation shown in Figure 3−5 can be
used if PC Card ZV is prioritized over other sources.
3.5.4
Standardized Zoomed-Video Register Model
The standardized zoomed-video register model is defined for the purpose of standardizing the ZV port control for PC
Card controllers across the industry. The following list summarizes the standardized zoomed-video register model
changes to the existing PC Card register set.
•
•
•
Socket present state register (CardBus socket address + 08h, see Section 6.3)
Bit 27 (ZVSUPPORT) has been added. The platform BIOS can set this bit via the socket force event register
(CardBus socket address + 0Ch, see Section 6.4) to define whether zoomed video is supported on that
socket by the platform.
Socket force event register (CardBus socket address + 0Ch, see Section 6.4)
Bit 27 (FZVSUPPORT) has been added. The platform BIOS can use this bit to set the ZVSUPPORT bit in
the socket present state register (CardBus socket address + 08h, see Section 6.3) to define whether
zoomed video is supported on that socket by the platform.
Socket control register (CardBus socket address +10h, see Section 6.5)
Bit 11 (ZV_ACTIVITY) has been added. This bit is set when zoomed video is enabled for either of the PC
Card sockets.
Bit 10 (STDZVREG) has been added. This bit defines whether the PC Card controller supports the
standardized zoomed-video register model.
Bit 9 (ZVEN) is provided for software to enable or disable zoomed video, per socket.
If the STDZVEN bit (bit 0) in the diagnostic register (PCI offset 93h, see Section 4.34) is 1, then the standardized
zoomed video register model is disabled. For backward compatibility, even if the STDZVEN bit is 0 (enabled), the
PCI1520 allows software to access zoomed video through the legacy address in the card control register (PCI offset
91h, see Section 4.32), or through the new register model in the socket control register (CardBus socket address +
10h, see Section 6.5).
3.5.4.1 Zoomed-Video Card Insertion and Configuration Procedure
1. A zoomed-video PC Card is inserted into an empty slot.
2. The card is detected and interrogated appropriately.
3−7
There are two types of PC Card controllers to consider.
•
Legacy controller not using the standardized ZV register model
Software reads bit 10 (STDZVREG) of the socket control register (CardBus socket address + 10h) to
determine if the standardized zoomed-video register model is supported. If the bit returns 0, then software
must use legacy code to enable zoomed video.
Newer controller that uses the standardized ZV register model
Software reads bit 10 (STDZVREG) of the socket control register (CardBus socket address + 10h) to
determine if the standardized zoomed-video register model is supported. If the bit returns 1, then software
can use the process/register model detailed in Table 3−4 to enable zoomed video.
•
Table 3−4. Zoomed-Video Card Interrogation
ZVSUPPORT
(this socket)
ZVSUPPORT
(other socket)
ZV_ACTIVITY
1
X
0
Set ZVEN to enable zoomed video.
1
X
1
Display a user message such as, “The zoomed video protocol required by this PC
Card application is already in use by another card.”
0
0
X
Display a user message such as, “This platform does not support the zoomed-video
protocol required by this PC Card application.”
0
1
X
Display a user message such as, “This platform does not support the zoomed-video
protocol required by this PC Card application in this PC Card socket. Please remove
the card and re-insert in the other PC Card socket.”
3.5.5
ACTION
Internal Ring Oscillator
The internal ring oscillator provides an internal clock source for the PCI1520 so that neither the PCI clock nor an
external clock is required in order for the PCI1520 to power down a socket or interrogate a PC Card. This internal
oscillator, operating nominally at 16 kHz, can be enabled by setting bit 27 (P2CCLK) of the system control register
(PCI offset 80h, see Section 4.29) to 1. This function is disabled by default.
3.5.6
Integrated Pullup Resistors
The PC Card Standard (release 7.1) requires pullup resistors on various terminals to support both CardBus and 16-bit
card configurations. Unlike the PCI12XX, PCI1450, and PCI4450 which required external pullup resistors, the
PCI1520 has integrated all of these pullup resistors. The I/O buffer on the BVD1(STSCHG)/CSTSCHG terminal has
the capability to switch either pullup or pulldown. The pullup resistor is turned on when a 16-bit PC Card is inserted,
and the pulldown resistor is turned on when a CardBus PC Card is inserted. This prevents unexpected CSTSCHG
signal assertion. The integrated pullup resistors are listed in Table 3−5.
3−8
Table 3−5. Integrated Pullup Resistors
TERM. NUMBER SOCKET A
SIGNAL NAME
A14/CPERR
3.5.7
TERM. NUMBER SOCKET B
PDV
GHK
PDV
GHK
109
R18
42
N06
A15/CIRDY
117
N18
50
P05
A19/CBLOCK
108
N14
41
N03
A20/CSTOP
111
P17
44
P02
A21/CDEVSEL
113
N15
46
P03
A22/CTRDY
116
N17
49
R02
BVD1(STSCHG)/CSTSCHG
141
H14
73
U09
BVD2(SPKR)/CAUDIO
140
H17
72
V09
CD1/CCD1
83
U11
15
H05
CD2/CCD2
144
G18
75
P09
INPACK/CREQ
130
K17
61
R07
READY/CINT
138
H19
69
V08
RESET/CRST
126
L15
58
W05
VS1/CVS1
137
J15
68
U08
VS2/CVS2
124
L18
56
P07
WAIT/CSERR
139
H18
71
W09
WP(IOIS16)/CCLKRUN
142
H15
74
R09
SPKROUT and CAUDPWM Usage
SPKROUT carries the digital audio signal from the PC Card to the system. When a 16-bit PC Card is configured for
I/O mode, the BVD2 terminal becomes SPKR. This terminal is also used in CardBus binary audio applications, and
is referred to as CAUDIO. SPKR passes a TTL-level digital audio signal to the PCI1520. The CardBus CAUDIO signal
also can pass a single-amplitude binary waveform. The binary audio signals from the two PC Card sockets are XORed
in the PCI1520 to produce SPKROUT. This output is enabled by bit 1 (SPKROUTEN) in the card control register (PCI
offset 91h, see Section 4.32).
Older controllers support CAUDIO in binary or PWM mode but use the same terminal (SPKROUT). Some audio chips
may not support both modes on one terminal and may have a separate terminal for binary and PWM. The PCI1520
implementation includes a signal for PWM, CAUDPWM, which can be routed to an MFUNC terminal. Bit 2
(AUD2MUX), located in the card control register, is programmed on a per-socket function basis to route a CardBus
CAUDIO PWM terminal to CAUDPWM. If both CardBus functions enable CAUDIO PWM routing to CAUDPWM, then
socket 0 audio takes precedence. See Section 4.30, Multifunction Routing Register, for details on configuring the
MFUNC terminals.
Figure 3−6 provides an illustration of a sample application using SPKROUT and CAUDPWM.
3−9
System
Core Logic
BINARY_SPKR
SPKROUT
Speaker
Subsystem
PCI1520
CAUDPWM
PWM_SPKR
Figure 3−6. Sample Application of SPKROUT and CAUDPWM
3.5.8
LED Socket Activity Indicators
The socket activity LEDs are provided to indicate when a PC Card is being accessed. The LEDA1 and LEDA2 signals
can be routed to the multifunction terminals. When configured for LED outputs, these terminals output an active high
signal to indicate socket activity. LEDA1 indicates socket 0 (card A) activity, and LEDA2 indicates socket 1 (card B)
activity. The LED_SKT output indicates socket activity to either socket 0 or socket 1. See Section 4.30, Multifunction
Routing Register, for details on configuring the multifunction terminals.
The active-high LED signal is driven for 64-ms. When the LED is not being driven high, it is driven to a low state. Either
of the two circuits shown in Figure 3−7 can be implemented to provide LED signaling, and the board designer must
implement the circuit that best fits the application.
The LED activity signals are valid when a card is inserted, powered, and not in reset. For PC Card-16, the LED activity
signals are pulsed when READY/IREQ is low. For CardBus cards, the LED activity signals are pulsed if CFRAME,
IRDY, or CREQ are active.
Current Limiting
R ≈ 500 Ω
LED
PCI1520
ApplicationSpecific Delay
Current Limiting
R ≈ 500 Ω
PCI1520
LED
Figure 3−7. Two Sample LED Circuits
As indicated, the LED signals are driven for a period of 64 ms by a counter circuit. To avoid the possibility of the LEDs
appearing to be stuck when the PCI clock is stopped, the LED signaling is cut off when the SUSPEND signal is
asserted, when the PCI clock is to be stopped during the clock run protocol, or when in the D2 or D1 power state.
If any additional socket activity occurs during this counter cycle, then the counter is reset and the LED signal remains
driven. If socket activity is frequent (at least once every 64 ms), then the LED signals remain driven.
3.5.9
CardBus Socket Registers
The PCI1520 contains all registers for compatibility with the 1997 PC Card Standard. These registers exist as the
CardBus socket registers and are listed in Table 3−6.
3−10
Table 3−6. CardBus Socket Registers
REGISTER NAME
OFFSET
Socket event
00h
Socket mask
04h
Socket present state
08h
Socket force event
0Ch
Socket control
10h
Reserved
14h−1Ch
Socket power management
20h
3.6 Serial-Bus Interface
The PCI1520 provides a serial-bus interface to load subsystem identification information and selected register
defaults from a serial EEPROM, and to provide a PC Card power-switch interface alternative to P2C. See
Section 3.5.2, P 2C Power-Switch Interface (TPS222X), for details. The PCI1520 serial-bus interface is compatible
with various I2C and SMBus components.
3.6.1
Serial-Bus Interface Implementation
The PCI1520 defaults to serial bus interface are disabled. To enable the serial interface, a pulldown resistor must
be implemented on the LATCH terminal and the appropriate pullup resistor must be implemented on the SDA and
SCL signals, that is, the MFUNC1 and MFUNC4 terminals. When the interface is detected, bit 3 (SBDETECT) in the
serial bus control and status register (see Section 4.48) is set. The SBDETECT bit is cleared by a writeback of 1.
The PCI1520 implements a two-terminal serial interface with one clock signal (SCL) and one data signal (SDA). When
a pulldown resistor is provided on the LATCH terminal, the SCL signal is mapped to the MFUNC4 terminal and the
SDA signal is mapped to the MFUNC1 terminal. The PCI1520 drives SCL at nearly 100 kHz during data transfers,
which is the maximum specified frequency for standard mode I2C. The serial EEPROM must be located at address
A0h. Figure 3−8 illustrates an example application implementing the two-wire serial bus.
VCC
Serial
EEPROM
PCI1520
LATCH
A2
A1
SCL
MFUNC4
A0
SDA
MFUNC1
Figure 3−8. Serial EEPROM Application
Some serial device applications may include PC Card power switches, ZV source switches, card ejectors, or other
devices that may enhance the user’s PC Card experience. The serial EEPROM device and PC Card power switches
are discussed in the sections that follow.
3.6.2
Serial-Bus Interface Protocol
The SCL and SDA signals are bidirectional, open-drain signals and require pullup resistors as shown in Figure 3−8.
The PCI1520, which supports up to 100-Kb/s data-transfer rate, is compatible with standard mode I2C using 7-bit
addressing.
All data transfers are initiated by the serial bus master. The beginning of a data transfer is indicated by a start
condition, which is signaled when the SDA line transitions to low state while SCL is in the high state, as illustrated
3−11
in Figure 3−9. The end of a requested data transfer is indicated by a stop condition, which is signaled by a low-to-high
transition of SDA while SCL is in the high state, as shown in Figure 3−9. Data on SDA must remain stable during the
high state of the SCL signal, as changes on the SDA signal during the high state of SCL are interpreted as control
signals, that is, a start or a stop condition.
SDA
SCL
Start
Condition
Stop
Condition
Change of
Data Allowed
Data Line Stable,
Data Valid
Figure 3−9. Serial-Bus Start/Stop Conditions and Bit Transfers
Data is transferred serially in 8-bit bytes. The number of bytes that may be transmitted during a data transfer is
unlimited; however, each byte must be completed with an acknowledge bit. An acknowledge (ACK) is indicated by
the receiver pulling the SDA signal low, so that it remains low during the high state of the SCL signal. Figure 3−10
illustrates the acknowledge protocol.
SCL From
Master
1
2
3
7
8
9
SDA Output
By Transmitter
SDA Output
By Receiver
Figure 3−10. Serial-Bus Protocol Acknowledge
The PCI1520 is a serial bus master; all other devices connected to the serial bus external to the PCI1520 are slave
devices. As the bus master, the PCI1520 drives the SCL clock at nearly 100 kHz during bus cycles and places SCL
in a high-impedance state (zero frequency) during idle states.
Typically, the PCI1520 masters byte reads and byte writes under software control. Doubleword reads are performed
by the serial EEPROM initialization circuitry upon a PCI reset and may not be generated under software control. See
Section 3.6.3, Serial-Bus EEPROM Application, for details on how the PCI1520 automatically loads the subsystem
identification and other register defaults through a serial-bus EEPROM.
Figure 3−11 illustrates a byte write. The PCI1520 issues a start condition and sends the 7-bit slave device address
and the command bit zero. A 0 in the R/W command bit indicates that the data transfer is a write. The slave device
acknowledges if it recognizes the address. If no acknowledgment is received by the PCI1520, then an appropriate
status bit is set in the serial-bus control and status register (PCI offset B3h, see Section 4.48). The word address byte
is then sent by the PCI1520, and another slave acknowledgment is expected. Then the PCI1520 delivers the data
byte MSB first and expects a final acknowledgment before issuing the stop condition.
3−12
Slave Address
S
Word Address
b6 b5 b4 b3 b2 b1 b0
0
A
Data Byte
b7 b6 b5 b4 b3 b2 b1 b0
A b7 b6 b5 b4 b3 b2 b1 b0
A
P
R/W
A = Slave Acknowledgement
S/P = Start/Stop Condition
Figure 3−11. Serial-Bus Protocol − Byte Write
Figure 3−12 illustrates a byte read. The read protocol is very similar to the write protocol, except the R/W command
bit must be set to 1 to indicate a read-data transfer. In addition, the PCI1520 master must acknowledge reception
of the read bytes from the slave transmitter. The slave transmitter drives the SDA signal during read data transfers.
The SCL signal remains driven by the PCI1520 master.
Slave Address
S
Word Address
b6 b5 b4 b3 b2 b1 b0
Start
0
A
Slave Address
b7 b6 b5 b4 b3 b2 b1 b0
A
S
b6 b5 b4 b3 b2 b1 b0
Restart
R/W
1
A
R/W
Data Byte
b7 b6 b5 b4 b3 b2 b1 b0
M
P
Stop
A = Slave Acknowledgement
M = Master Acknowledgement
S/P = Start/Stop Condition
Figure 3−12. Serial-Bus Protocol − Byte Read
Figure 3−13 illustrates EEPROM interface doubleword data collection protocol.
Slave Address
S
1
0
1
0
0
Word Address
0
0
Start
0
A
Slave Address
b7 b6 b5 b4 b3 b2 b1 b0
M
A = Slave Acknowledgement
S
1
0
1
0
0
Data Byte 2
M
Data Byte 1
M = Master Acknowledgement
M
Data Byte 0
0
0
1
A
R/W
Restart
R/W
Data Byte 3
A
M
P
S/P = Start/Stop Condition
Figure 3−13. EEPROM Interface Doubleword Data Collection
3.6.3
Serial-Bus EEPROM Application
When the PCI bus is reset and the serial-bus interface is detected, the PCI1520 attempts to read the subsystem
identification and other register defaults from a serial EEPROM. The registers and corresponding bits that can be
loaded with defaults through the EEPROM are provided in Table 3−7.
3−13
Table 3−7. Register- and Bit-Loading Map
EEPROM
OFFSET
REGISTER
OFFSET
00h
Flag
REGISTER BITS LOADED FROM EEPROM
01h: Load / FFh: do not load
01h
PCI 04h
Command register, bits 8, 6−5, 2−0
Note: bits loaded per following:
b8 ← b7
b6 ← b6
b5 ← b5
b2 ← b2
b1 ← b1
b0 ← b0
02h
PCI 40h
Subsystem vendor ID bits 7−0 ← bits 7−0
03h
PCI 40h
Subsystem vendor ID bits 15−8 ← bit 7−0
04h
PCI 42h
Subsystem ID bits 7−0 ← bits 7−0
05h
PCI 42h
Subsystem ID bits 15−8 ← bits 7−0
06h
PCI 44h
PC Card 16-bit I/F legacy-mode base address bits 7−1 ← bits 7−1
07h
PCI 44h
PC Card 16-bit I/F legacy-mode base address bits 15−8 ← bits 7−0
08h
PCI 44h
PC Card 16-bit I/F legacy-mode base address bit 23:16 ← bit 7:0
09h
PCI 44h
PC Card 16-bit I/F legacy-mode base address bits 31−24 ← bits 7−0
0Ah
PCI 80h
System control bits 7−0 ← bits 7−0
0Bh
PCI 80h
System control bits 15−8 ← bits 7−0
0Ch
PCI 80h
System control byte bits 31−24 ← bits 7−0
0Dh
PCI 8Ch
Multifunction routing bits 7−0 ← bits 7−0
0Eh
PCI 8Ch
Multifunction routing bits 15−8 ← bits 7−0
0Fh
PCI 8Ch
Multifunction routing bits 23−16 ← bits 7−0
10h
PCI 8Ch
Multifunction routing bits 27−24 ← bits 3−0
11h
PCI 90h
Retry status bits 7, 6 ← bits 7, 6
12h
PCI 91h
Card control bits 7, 5 ← bits 7, 6
13h
PCI 92h
Device control bits 6, 3−0 ← bits 6, 3−0
14h
PCI 93h
Diagnostic bits 7, 4−0 ← bits 7, 4−0
15h
PCI A2h
Power management capabilities bit 15 ← bit 7
16h
ExCA 00h
17h
CB Socket + 0Ch
(function 0)
Function 0 socket force event, bit 27 ← bit 3
18h
CB Socket + 0Ch
(function 1)
Function 1 socket force event, bit 27 ← bit 3
ExCA identification and revision bits 7−0 ← bits 7−0
This format must be followed for the PCI1520 to load initializations from a serial EEPROM. All bit fields must be
considered when programming the EEPROM.
The serial EEPROM is addressed at slave address 1010 000b by the PCI1520. All hardware address bits for the
EEPROM should be tied to the appropriate level to achieve this address. The serial EEPROM chip in the sample
application circuit (Figure 3−8) assumes the 1010b high-address nibble. The lower three address bits are terminal
inputs to the chip, and the sample application shows these terminal inputs tied to GND.
3.6.4
Accessing Serial-Bus Devices Through Software
The PCI1520 provides a programming mechanism to control serial bus devices through software. The programming
is accomplished through a doubleword of PCI configuration space at offset B0h. Table 3−8 lists the registers used
to program a serial-bus device through software.
3−14
Table 3−8. PCI1520 Registers Used to Program Serial-Bus Devices
PCI OFFSET
REGISTER NAME
DESCRIPTION
B0h
Serial-bus data
Contains the data byte to send on write commands or the received data byte on read commands.
B1h
Serial-bus index
The content of this register is sent as the word address on byte writes or reads. This register is not used
in the quick command protocol.
B2h
Serial-bus slave
address
Write transactions to this register initiate a serial-bus transaction. The slave device address and the
R/W command selector are programmed through this register.
B3h
Serial-bus control
and status
Read data valid, general busy, and general error status are communicated through this register. In
addition, the protocol-select bit is programmed through this register.
3.7 Programmable Interrupt Subsystem
Interrupts provide a way for I/O devices to let the microprocessor know that they require servicing. The dynamic
nature of PC Cards and the abundance of PC Card I/O applications require substantial interrupt support from the
PCI1520. The PCI1520 provides several interrupt signaling schemes to accommodate the needs of a variety of
platforms. The different mechanisms for dealing with interrupts in this device are based on various specifications and
industry standards. The ExCA register set provides interrupt control for some 16-bit PC Card functions, and the
CardBus socket register set provides interrupt control for the CardBus PC Card functions. The PCI1520 is, therefore,
backward compatible with existing interrupt control register definitions, and new registers have been defined where
required.
The PCI1520 detects PC Card interrupts and events at the PC Card interface and notifies the host controller using
one of several interrupt signaling protocols. To simplify the discussion of interrupts in the PCI1520, PC Card interrupts
are classified either as card status change (CSC) or as functional interrupts.
The method by which any type of PCI1520 interrupt is communicated to the host interrupt controller varies from
system to system. The PCI1520 offers system designers the choice of using parallel PCI interrupt signaling, parallel
ISA-type IRQ interrupt signaling, or the IRQSER serialized ISA and/or PCI interrupt protocol. It is possible to use the
parallel PCI interrupts in combination with either parallel IRQs or serialized IRQs, as detailed in the sections that
follow. All interrupt signaling is provided through the seven multifunction terminals, MFUNC0−MFUNC6.
3.7.1
PC Card Functional and Card Status Change Interrupts
PC Card functional interrupts are defined as requests from a PC Card application for interrupt service and are
indicated by asserting specially-defined signals on the PC Card interface. Functional interrupts are generated by
16-bit I/O PC Cards and by CardBus PC Cards.
Card status change (CSC)-type interrupts are defined as events at the PC Card interface that are detected by the
PCI1520 and may warrant notification of host card and socket services software for service. CSC events include both
card insertion and removal from PC Card sockets, as well as transitions of certain PC Card signals.
Table 3−9 summarizes the sources of PC Card interrupts and the type of card associated with them. CSC and
functional interrupt sources are dependent on the type of card inserted in the PC Card socket. The three types of cards
that can be inserted into any PC Card socket are:
•
•
•
16-bit memory card
16-bit I/O card
CardBus cards
3−15
Table 3−9. Interrupt Mask and Flag Registers
CARD TYPE
16-bit memory
16-bit I/O
All 16-bit PC
Cards
CardBus
EVENT
MASK
FLAG
Battery conditions (BVD1, BVD2)
ExCA offset 05h/45h/805h bits 1 and 0
ExCA offset 04h/44h/804h bits 1 and 0
Wait states (READY)
ExCA offset 05h/45h/805h bit 2
ExCA offset 04h/44h/804h bit 2
Change in card status (STSCHG)
ExCA offset 05h/45h/805h bit 0
ExCA offset 04h/44h/804h bit 0
Interrupt request (IREQ)
Always enabled
PCI configuration offset 91h bit 0
Power cycle complete
ExCA offset 05h/45h/805h bit 3
ExCA offset 04h/44h/804h bit 3
Change in card status (CSTSCHG)
Socket mask bit 0
Socket event bit 0
Interrupt request (CINT)
Always enabled
PCI configuration offset 91h bit 0
Power cycle complete
Socket mask bit 3
Socket event bit 3
Card insertion or removal
Socket mask bits 2 and 1
Socket event bits 2 and 1
Functional interrupt events are valid only for 16-bit I/O and CardBus cards; that is, the functional interrupts are not
valid for 16-bit memory cards. Furthermore, card insertion and removal-type CSC interrupts are independent of the
card type.
Table 3−10. PC Card Interrupt Events and Description
CARD TYPE
16-bit
memory
16-bit I/O
CardBus
All PC Cards
EVENT
TYPE
SIGNAL
DESCRIPTION
BVD1(STSCHG)//CSTSCHG
A transition on BVD1 indicates a change in the
PC Card battery conditions.
BVD2(SPKR)//CAUDIO
A transition on BVD2 indicates a change in the
PC Card battery conditions.
Battery conditions
(BVD1, BVD2)
CSC
Wait states
(READY)
CSC
READY(IREQ)//CINT
Change in card
status (STSCHG)
CSC
BVD1(STSCHG)//CSTSCHG
The assertion of STSCHG indicates a status change
on the PC Card.
Interrupt request
(IREQ)
Functional
READY(IREQ)//CINT
The assertion of IREQ indicates an interrupt request
from the PC Card.
Change in card
status (CSTSCHG)
CSC
BVD1(STSCHG)//CSTSCHG
Interrupt request
(CINT)
Functional
READY(IREQ)//CINT
Card insertion
or removal
CSC
CD1//CCD1,
CD2//CCD2
Power cycle
complete
CSC
N/A
A transition on READY indicates a change in the
ability of the memory PC Card to accept or provide
data.
The assertion of CSTSCHG indicates a status
change on the PC Card.
The assertion of CINT indicates an interrupt request
from the PC Card.
A transition on either CD1//CCD1 or CD2//CCD2
indicates an insertion or removal of a 16-bit or
CardBus PC Card.
An interrupt is generated when a PC Card power-up
cycle has completed.
The naming convention for PC Card signals describes the function for 16-bit memory, I/O cards, and CardBus. For
example, READY(IREQ)//CINT includes READY for 16-bit memory cards, IREQ for 16-bit I/O cards, and CINT for
CardBus cards. The 16-bit memory card signal name is first, with the I/O card signal name second, enclosed in
parentheses. The CardBus signal name follows after a double slash (//).
The 1997 PC Card Standard describes the power-up sequence that must be followed by the PCI1520 when an
insertion event occurs and the host requests that the socket VCC and VPP be powered. Upon completion of this
power-up sequence, the PCI1520 interrupt scheme can be used to notify the host system (see Table 3−10), denoted
by the power cycle complete event. This interrupt source is considered a PCI1520 internal event, because it depends
on the completion of applying power to the socket rather than on a signal change at the PC Card interface.
3−16
3.7.2
Interrupt Masks and Flags
Host software may individually mask (or disable) most of the potential interrupt sources listed in Table 3−10 by setting
the appropriate bits in the PCI1520. By individually masking the interrupt sources listed, software can control those
events that cause a PCI1520 interrupt. Host software has some control over the system interrupt the PCI1520 asserts
by programming the appropriate routing registers. The PCI1520 allows host software to route PC Card CSC and PC
Card functional interrupts to separate system interrupts. Interrupt routing somewhat specific to the interrupt signaling
method used is discussed in more detail in the following sections.
When an interrupt is signaled by the PCI1520, the interrupt service routine must determine which of the events listed
in Table 3−9 caused the interrupt. Internal registers in the PCI1520 provide flags that report the source of an interrupt.
By reading these status bits, the interrupt service routine can determine the action to be taken.
Table 3−9 details the registers and bits associated with masking and reporting potential interrupts. All interrupts can
be masked except the functional PC Card interrupts, and an interrupt status flag is available for all types of interrupts.
Notice that there is not a mask bit to stop the PCI1520 from passing PC Card functional interrupts through to the
appropriate interrupt scheme. These interrupts are not valid until the card is properly powered, and there should never
be a card interrupt that does not require service after proper initialization.
Table 3−9 lists the various methods of clearing the interrupt flag bits. The flag bits in the ExCA registers (16-bit PC
Card-related interrupt flags) can be cleared using two different methods. One method is an explicit write of 1 to the
flag bit to clear and the other is by reading the flag bit register. The selection of flag bit clearing methods is made by
bit 2 (IFCMODE) in the ExCA global control register (ExCA offset 1Eh/5Eh/81Eh, see Section 5.20), and defaults to
the flag-cleared-on-read method.
The CardBus-related interrupt flags can be cleared by an explicit write of 1 to the interrupt flag in the socket event
register (see Section 6.1). Although some of the functionality is shared between the CardBus registers and the ExCA
registers, software should not program the chip through both register sets when a CardBus card is functioning.
3.7.3
Using Parallel IRQ Interrupts
The seven multifunction terminals, MFUNC6−MFUNC0, implemented in the PCI1520 can be routed to obtain a
subset of the ISA IRQs. The IRQ choices provide ultimate flexibility in PC Card host interruptions. To use the parallel
ISA-type IRQ interrupt signaling, software must program the device control register (PCI offset 92h, see
Section 4.33), to select the parallel IRQ signaling scheme. See Section 4.30, Multifunction Routing Register, for
details on configuring the multifunction terminals.
A system using parallel IRQs requires (at a minimum) one PCI terminal, INTA, to signal CSC events. This requirement
is dictated by certain card and socket-services software. The INTA requirement calls for routing the MFUNC0 terminal
for INTA signaling. The INTRTIE bit is used, in this case, to route socket B interrupt events to INTA. This leaves (at
a maximum) six different IRQs to support legacy 16-bit PC Card functions.
As an example, suppose the six IRQs used by legacy PC Card applications are IRQ3, IRQ4, IRQ5, IRQ10, IRQ11,
and IRQ15. The multifunction routing register must be programmed to a value of 0FBA 5432h. This value routes the
MFUNC0 terminal to INTA signaling and routes the remaining terminals as illustrated in Figure 3−14. Not shown is
that INTA must also be routed to the programmable interrupt controller (PIC), or to some circuitry that provides parallel
PCI interrupts to the host.
3−17
PCI1520
MFUNC1
IRQ3
PIC
MFUNC2
IRQ4
MFUNC3
IRQ5
MFUNC4
IRQ10
MFUNC5
IRQ11
MFUNC6
IRQ15
Figure 3−14. IRQ Implementation
Power-on software is responsible for programming the multifunction routing register to reflect the IRQ configuration
of a system implementing the PCI1520. The multifunction routing register is shared between the two PCI1520
functions, and only one write to function 0 or 1 is necessary to configure the MFUNC6−MFUNC0 signals. Writing to
function 0 only is recommended. See Section 4.30, Multifunction Routing Register, for details on configuring the
multifunction terminals.
The parallel ISA-type IRQ signaling from the MFUNC6−MFUNC0 terminals is compatible with the input signal
requirements of the 8259 PIC. The parallel IRQ option is provided for system designs that require legacy ISA IRQs.
Design constraints may demand more MFUNC6−MFUNC0 IRQ terminals than the PCI1520 makes available.
3.7.4
Using Parallel PCI Interrupts
Parallel PCI interrupts are available when exclusively in parallel PCI interrupt/parallel ISA IRQ signaling mode, and
when only IRQs are serialized with the IRQSER protocol. Both INTA and INTB can be routed to MFUNC terminals
(MFUNC0 and MFUNC1). However, interrupts of both socket functions can be routed to INTA (MFUNC0) if bit 29
(INTRTIE) is set in the system control register (PCI offset 80h, see Section 4.29).
The INTRTIE bit affects the read-only value provided through accesses to the interrupt pin register (PCI offset 3Dh,
see Section 4.24). When the INTRTIE bit is set, both functions return a value of 01h on reads from the interrupt pin
register for both parallel and serial PCI interrupts. Table 3−11 summarizes the interrupt signaling modes.
Table 3−11. Interrupt Pin Register Cross Reference
INTPIN
INTRTIE BIT
3.7.5
FUNCTION 0
FUNCTION 1
0
01h
02h
1
01h
01h
Using Serialized IRQSER Interrupts
The serialized interrupt protocol implemented in the PCI1520 uses a single terminal to communicate all interrupt
status information to the host controller. The protocol defines a serial packet consisting of a start cycle, multiple
interrupt indication cycles, and a stop cycle. All data in the packet is synchronous with the PCI clock. The packet data
describes 16 parallel ISA IRQ signals and the optional 4 PCI interrupts INTA, INTB, INTC, and INTD. For details on
the IRQSER protocol, refer to the document Serialized IRQ Support for PCI Systems.
3.7.6
SMI Support in the PCI1520
The PCI1520 provides a mechanism for interrupting the system when power changes have been made to the PC
Card socket interfaces. The interrupt mechanism is designed to fit into a system maintenance interrupt (SMI) scheme.
SMI interrupts are generated by the PCI1520, when enabled, after a write cycle to either the socket control register
(CB offset 10h, see Section 6.5) of the CardBus register set, or the ExCA power control register (ExCA offset
02h/42h/802h, see Section 5.3) causes a power cycle change sequence to be sent on the power switch interface.
The SMI control is programmed through three bits in the system control register (PCI offset 80h, see Section 4.29).
These bits are SMIROUTE (bit 26), SMISTATUS (bit 25), and SMIENB (bit 24). Table 3−12 describes the SMI control
bits function.
3−18
Table 3−12. SMI Control
BIT NAME
FUNCTION
SMIROUTE
This shared bit controls whether the SMI interrupts are sent as a CSC interrupt or as IRQ2.
SMISTAT
This socket dependent bit is set when an SMI interrupt is pending. This status flag is cleared by writing back a 1.
SMIENB
When set, SMI interrupt generation is enabled. This bit is shared by functions 0 and 1.
If CSC SMI interrupts are selected, then the SMI interrupt is sent as the CSC on a per-socket basis. The CSC interrupt
can be either level or edge mode, depending upon the CSCMODE bit in the ExCA global control register (ExCA offset
1Eh/5Eh/81Eh, see Section 5.20).
If IRQ2 is selected by SMIROUTE, then the IRQSER signaling protocol supports SMI signaling in the IRQ2 IRQ/Data
slot. In a parallel ISA IRQ system, the support for an active low IRQ2 is provided only if IRQ2 is routed to either
MFUNC3 or MFUNC6 through the multifunction routing register (PCI offset 8Ch, see Section 4.30).
3.8 Power Management Overview
In addition to the low-power CMOS technology process used for the PCI1520, various features are designed into the
device to allow implementation of popular power-saving techniques. These features and techniques are discussed
in this section.
3.8.1
Integrated Low-Dropout Voltage Regulator (LDO-VR)
The PCI1520 requires 2.5-V core voltage. The core power can be supplied by the PCI1520 itself using the internal
LDO-VR. The core power can alternatively be supplied by an external power supply through the VR_PORT terminal.
Table 3−13 lists the requirements for both the internal core power supply and the external core power supply.
Table 3−13. Requirements for Internal/External 2.5-V Core Power Supply
SUPPLY
VCC
3.3 V
VR_EN
VR_PORT
Internal
GND
2.5-V output
Internal 2.5-V LDO-VR is enabled. A 1.0 µF bypass capacitor is required on the VR_PORT
terminal for decoupling. This output is not for external use.
External
3.3 V
VCC
2.5-V input
Internal 2.5-V LDO-VR is disabled. An external 2.5-V power supply, of minimum 50-mA
capacity, is required. A 0.1 µF bypass capacitor on the VR_PORT terminal is required.
3.8.2
NOTE
Clock Run Protocol
The PCI CLKRUN feature is the primary method of power management on the PCI interface of the PCI1520. CLKRUN
signaling is provided through the MFUNC6 terminal. Since some chip sets do not implement CLKRUN, this is not
always available to the system designer, and alternate power-saving features are provided. For details on the
CLKRUN protocol see the PCI Mobile Design Guide.
The PCI1520 does not permit the central resource to stop the PCI clock under any of the following conditions:
•
Bit 1 (KEEPCLK) in the system control register (PCI offset 80h, see Section 4.29) is set.
•
The 16-bit PC Card- resource manager is busy.
•
The PCI1520 CardBus master state machine is busy. A cycle may be in progress on CardBus.
•
The PCI1520 master is busy. There may be posted data from CardBus to PCI in the PCI1520.
•
Interrupts are pending.
•
The CardBus CCLK for either socket has not been stopped by the PCI1520 CCLKRUN manager.
3−19
The PCI1520 restarts the PCI clock using the CLKRUN protocol under any of the following conditions:
•
A 16-bit PC Card IREQ or a CardBus CINT has been asserted by either card.
•
A CardBus CBWAKE (CSTSCHG) or 16-bit PC Card STSCHG/RI event occurs in either socket.
•
A CardBus attempts to start the CCLK using CCLKRUN.
•
A CardBus card arbitrates for the CardBus bus using CREQ.
3.8.3
CardBus PC Card Power Management
The PCI1520 implements its own card power-management engine that can turn off the CCLK to a socket when there
is no activity to the CardBus PC Card. The PCI clock-run protocol is followed on the CardBus CCLKRUN interface
to control this clock management.
3.8.4
16-Bit PC Card Power Management
The COE bit (bit 7) of the ExCA power control register (ExCA offset 02h/42h/802h, see Section 5.3) and PWRDWN
bit (bit 0) of the ExCA global control register (ExCA offset 1Eh/5Eh/81Eh, see Section 5.20) bits are provided for 16-bit
PC Card power management. The COE bit places the card interface in a high-impedance state to save power. The
power savings when using this feature are minimal. The COE bit resets the PC Card when used, and the PWRDWN
bit does not. Furthermore, the PWRDWN bit is an automatic COE, that is, the PWRDWN performs the COE function
when there is no card activity.
NOTE: The 16-bit PC Card must implement the proper pullup resistors for the COE and
PWRDWN modes.
3.8.5
Suspend Mode
The SUSPEND signal, provided for backward compatibility, gates the PRST (PCI reset) signal and the GRST (global
reset) signal from the PCI1520. Besides gating PRST and GRST, SUSPEND also gates PCLK inside the PCI1520
in order to minimize power consumption.
Gating PCLK does not create any issues with respect to the power switch interface in the PCI1520. This is because
the PCI1520 does not depend on the PCI clock to clock the power switch interface. There are two methods to clock
the power switch interface in the PCI1520:
•
•
Use an external clock to the PCI1520 CLOCK terminal
Use the internal oscillator
It should also be noted that asynchronous signals, such as card status change interrupts and RI_OUT, can be passed
to the host system without a PCI clock. However, if card status change interrupts are routed over the serial interrupt
stream, then the PCI clock must be restarted in order to pass the interrupt, because neither the internal oscillator nor
an external clock is routed to the serial-interrupt state machine. Figure 3−15 is a signal diagram of the suspend
function.
3−20
RESET
GNT
SUSPEND
PCLK
External Terminals
Internal Signals
RESETIN
SUSPENDIN
PCLKIN
Figure 3−15. Signal Diagram of Suspend Function
3.8.6
Requirements for Suspend Mode
The suspend mode prevents the clearing of all register contents on the assertion of reset (PRST or GRST) which
would require the reconfiguration of the PCI1520 by software. Asserting the SUSPEND signal places the PCI outputs
of the controller in a high-impedance state and gates the PCLK signal internally to the controller unless a PCI
transaction is currently in process (GNT is asserted). It is important that the PCI bus not be parked on the PCI1520
when SUSPEND is asserted because the outputs are in a high-impedance state.
The GPIOs, MFUNC signals, and RI_OUT signal are all active during SUSPEND, unless they are disabled in the
appropriate PCI1520 registers.
3.8.7
Ring Indicate
The RI_OUT output is an important feature in power management, allowing a system to go into a suspended mode
and wake up on modem rings and other card events. TI-designed flexibility permits this signal to fit wide platform
requirements. RI_OUT on the PCI1520 can be asserted under any of the following conditions:
•
A 16-bit PC Card modem in a powered socket asserts RI to indicate to the system the presence of an
incoming call.
•
A powered down CardBus card asserts CSTSCHG (CBWAKE) requesting system and interface wake up.
•
A powered CardBus card asserts CSTSCHG from the insertion/removal of cards or change in battery
voltage levels.
Figure 3−16 shows various enable bits for the PCI1520 RI_OUT function; however, it does not show the masking of
CSC events. See Table 3−9 for a detailed description of CSC interrupt masks and flags.
3−21
RI_OUT Function
CSTSMASK
PC Card
Socket 0
CSC
Card
I/F
RINGEN
RI
CDRESUME
RIENB
CSC
RI_OUT
CSTSMASK
PC Card
Socket 1
CSC
Card
I/F
RINGEN
RI
CDRESUME
CSC
Figure 3−16. RI_OUT Functional Diagram
RI from the 16-bit PC Card interface is masked by bit 7 (RINGEN) in the ExCA interrupt and general control register
(ExCA offset 03h/43h/803h, see Section 5.4). This is programmed on a per-socket basis and is only applicable when
a 16-bit card is powered in the socket.
The CBWAKE signaling to RI_OUT is enabled through the same mask as the CSC event for CSTSCHG. The mask
bit (bit 0, CSTSMASK) is programmed through the socket mask register (CB offset 04h, see Section 6.2) in the
CardBus socket registers.
RI_OUT can be routed through any of three different pins, RI_OUT/PME, MFUNC2, or MFUNC4. The RI_OUT
function is enabled by setting RIENB in the card control register (PCI offset 91h, see Section 4.32). The PME function
is enabled by setting PMEEN in the power management control/status register (PCI offset A4h, see Section 4.38).
When RIMUX in the system control register (PCI offset 80h, see Section 4.29) is set to 0, both the RI_OUT function
and the PME function are routed to the RI_OUT/PME terminal. If both functions are enabled and RIMUX is set to 0,
the RI_OUT/PME terminal becomes RI_OUT only and PME assertions will never be seen. Therefore, in a system
using both the RI_OUT function and the PME function, RIMUX must be set to 1 and RI_OUT must be routed to either
MFUNC2 or MFUNC4.
3.8.8
PCI Power Management
The PCI Bus Power Management Interface Specification for PCI to CardBus Bridges establishes the infrastructure
required to let the operating system control the power of PCI functions. This is done by defining a standard PCI
interface and operations to manage the power of PCI functions on the bus. The PCI bus and the PCI functions can
be assigned one of seven power-management states, resulting in varying levels of power savings.
The seven power-management states of PCI functions are:
•
•
•
•
•
•
•
3−22
D0-uninitialized − Before device configuration, device not fully functional
D0-active − Fully functional state
D1 − Low-power state
D2 − Low-power state
D3hot − Low-power state. Transition state before D3cold
D3cold − PME signal-generation capable. Main power is removed and VAUX is available.
D3off − No power and completely nonfunctional
NOTE 1: In the D0-uninitialized state, the PCI1520 does not generate PME and/or interrupts. When the IO_EN and MEM_EN bits (bits 0 and
1) of the command register (PCI offset 04h, see Section 4.4) are both set, the PCI1520 switches the state to D0-active. Transition from
D3cold to the D0-uninitialized state happens at the deassertion of PRST. The assertion of GRST forces the controller to the
D0-uninitialized state immediately.
NOTE 2: The PWR_STATE bits (bits 0−1) of the power-management control/status register (PCI offset A4h, see Section 4.38) only code for four
power states, D0, D1, D2, and D3hot. The differences between the three D3 states is invisible to the software because the controller
is not accessible in the D3cold or D3off state.
Similarly, bus power states of the PCI bus are B0−B3. The bus power states B0−B3 are derived from the device power
state of the originating bridge device.
For the operating system (OS) to manage the device power states on the PCI bus, the PCI function should support
four power-management operations. These operations are:
•
•
•
•
Capabilities reporting
Power status reporting
Setting the power state
System wake up
The OS identifies the capabilities of the PCI function by traversing the new capabilities list. The presence of
capabilities in addition to the standard PCI capabilities is indicated by a 1 in bit 4 (CAPLIST) of the status register (PCI
offset 06h, see Section 4.5).
The capabilities pointer provides access to the first item in the linked list of capabilities. For the PCI1520, a CardBus
bridge with PCI configuration space header type 2, the capabilities pointer is mapped to an offset of 14h. The first
byte of each capability register block is required to be a unique ID of that capability. PCI power management has been
assigned an ID of 01h. The next byte is a pointer to the next pointer item in the list of capabilities. If there are no more
items in the list, then the next item pointer must be set to 0. The registers following the next item pointer are specific
to the capability of the function. The PCI power-management capability implements the register block outlined in
Table 3−14.
Table 3−14. Power-Management Registers
REGISTER NAME
Power-management capabilities
Data
Power-management control/
status register bridge support
extensions
OFFSET
Next item pointer
Capability ID
Power-management control/status (CSR)
A0h
A4h
The power management capabilities register (PCI offset A2h, see Section 4.37) provides information on the
capabilities of the function related to power management. The power-management control/status register (PCI offset
A4h, see Section 4.38) enables control of power-management states and enables/monitors power-management
events. The data register is an optional register that can provide dynamic data.
For more information on PCI power management, see the PCI Bus Power Management Interface Specification for
PCI to CardBus Bridges.
3.8.9
CardBus Bridge Power Management
The PCI Bus Power Management Interface Specification for PCI to CardBus Bridges was approved by PCMCIA in
December of 1997. This specification follows the device and bus state definitions provided in the PCI Bus Power
Management Interface Specification published by the PCI Special Interest Group (SIG). The main issue addressed
in the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges is wake-up from D3hot or D3cold
without losing wake-up context (also called PME context).
3−23
The specific issues addressed by the PCI Bus Power Management Interface Specification for PCI to CardBus Bridges
for D3 wake up are as follows:
•
Preservation of device context. The specification states that a reset must occur during the transition from
D3 to D0. Some method to preserve wake-up context must be implemented so that the reset does not clear
the PME context registers.
•
Power source in D3cold if wake-up support is required from this state.
The Texas Instruments PCI1520 addresses these D3 wake-up issues in the following manner:
•
•
Two resets are provided to handle preservation of PME context bits:
−
Global reset (GRST) is used only on the initial boot up of the system after power up. It places the
PCI1520 in its default state and requires BIOS to configure the device before becoming fully functional.
−
PCI reset (PRST) has dual functionality based on whether PME is enabled or not. If PME is enabled,
then PME context is preserved. If PME is not enabled, then PRST acts the same as a normal PCI reset.
Please see the master list of PME context bits in Section 3.8.11.
Power source in D3cold if wake-up support is required from this state. Since VCC is removed in D3cold, an
auxiliary power source must be supplied to the PCI1520 VCC terminals. Consult the PCI14xx
Implementation Guide for D3 Wake-Up or the PCI Power Management Interface Specification for PCI to
CardBus Bridges for further information.
3.8.10 ACPI Support
The Advanced Configuration and Power Interface (ACPI) Specification provides a mechanism that allows unique
pieces of hardware to be described to the ACPI driver. The PCI1520 offers a generic interface that is compliant with
ACPI design rules.
Two doublewords of general-purpose ACPI programming bits reside in PCI1520 PCI configuration space at offset
A8h. The programming model is broken into status and control functions. In compliance with ACPI, the top level event
status and enable bits reside in the general-purpose event status register (PCI offset A8h, see Section 4.41) and
general-purpose event enable register (PCI offset AAh, see Section 4.42). The status and enable bits are
implemented as defined by ACPI and illustrated in Figure 3−17.
Status Bit
Event Input
Enable Bit
Event Output
Figure 3−17. Block Diagram of a Status/Enable Cell
The status and enable bits generate an event that allows the ACPI driver to call a control method associated with the
pending status bit. The control method can then control the hardware by manipulating the hardware control bits or
by investigating child status bits and calling their respective control methods. A hierarchical implementation would
be somewhat limiting, however, as upstream devices would have to remain in some level of power state to report
events.
For more information of ACPI, see the Advanced Configuration and Power Interface (ACPI) Specification.
3−24
3.8.11 Master List of PME Context Bits and Global Reset-Only Bits
If the PME enable bit (bit 8) of the power-management control/status register (PCI offset A4h, see section 4.38) is
asserted, then the assertion of PRST will not clear the following PME context bits. If the PME enable bit is not asserted,
then the PME context bits are cleared with PRST. The PME context bits are:
•
•
•
•
•
•
•
•
•
•
•
Bridge control register (PCI offset 3Eh): bit 6
System control register (PCI offset 80h): bits 10, 9, 8
Power-management control/status register (PCI offset A4h): bits 15, 8
ExCA power control register (ExCA offset 802h): bits 7, 5†, 4−3, 1−0 († 82365SL mode only)
ExCA interrupt and general control register (ExCA offset 803h): bits 6−5
ExCA card status change register (ExCA offset 804h): bits 11−8, 3−0
ExCA card status-change-interrupt configuration register (ExCA offset 805h): bits 3−0
CardBus socket event register (CardBus offset 00h): bits 3−0
CardBus socket mask register (CardBus offset 04h): bits 3−0
CardBus socket present state register (CardBus offset 08h): bits 13−7, 5−1
CardBus socket control register (CardBus offset 10h): bits 6−4, 2−0
Global reset places all registers in their default state regardless of the state of the PME enable bit. The GRST signal
is gated only by the SUSPEND signal. This means that assertion of SUSPEND blocks the GRST signal internally,
thus preserving all register contents. The registers cleared only by GRST are:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Status register (PCI offset 06h): bits 15−11, 8
Secondary status register (PCI offset 16h): bits 15−11, 8
Interrupt pin register (PCI offset 3Dh): bits 1,0 (function 1 only)
Subsystem vendor ID register (PCI offset 40h): bits 15–0
Subsystem ID register (PCI offset 42h): bits 15–0
PC Card 16-bit legacy mode base address register (PCI offset 44h): bits 31–1
System control register (PCI offset 80h): bits 31–29, 27–13, 11, 6−0
Multifunction routing register (PCI offset 8Ch): bits 27−0
Retry status register (PCI offset 90h): bits 7−5, 3, 1
Card control register (PCI offset 91h): bits 7−5, 2−0
Device control register (PCI offset 92h): bits 7−5, 3−0
Diagnostic register (PCI offset 93h): bits 7−0
Power management capabilities register (PCI offset A2h): bit 15
General-purpose event status register (PCI offset A8h): bits 15−14
General-purpose event enable register (PCI offset AAh): bits 15−14, 11, 8, 4−0
General-purpose output (PCI offset AEh): bits 4−0
Serial bus data (PCI offset B0h): bits 7−0
Serial bus index (PCI offset B1h): bits 7−0
Serial bus slave address register (PCI offset B2h): bits 7−0
Serial bus control and status register (PCI offset B3h): bits 7, 5−0
ExCA identification and revision register (ExCA offset 00h): bits 7−0
ExCA global control register (ExCA offset 1Eh): bits 2−0
Socket present state register (CardBus offset 08h): bit 29
Socket power management register (CardBus offset 20h): bits 25−24
3−25
3−26
4 PC Card Controller Programming Model
This section describes the PCI1520 PCI configuration registers that make up the 256-byte PCI configuration header
for each PCI1520 function. As noted, some bits are global in nature and are accessed only through function 0.
4.1 PCI Configuration Registers (Functions 0 and 1)
The PCI1520 is a multifunction PCI device, and the PC Card controller is integrated as PCI functions 0 and 1. The
configuration header is compliant with the PCI Local Bus Specification as a CardBus bridge header and is PC 99
compliant as well. Table 4−1 shows the PCI configuration header, which includes both the predefined portion of the
configuration space and the user-definable registers.
Table 4−1. PCI Configuration Registers (Functions 0 and 1)
REGISTER NAME
OFFSET
Device ID
Vendor ID
Status
00h
Command
Class code
BIST
Header type
Latency timer
04h
Revision ID
08h
Cache line size
0Ch
CardBus socket/ExCA base address
Secondary status
CardBus latency timer
Subordinate bus number
10h
Reserved
Capability pointer
CardBus bus number
PCI bus number
1Ch
CardBus Memory limit register 0
20h
CardBus Memory base register 1
24h
CardBus Memory limit register 1
28h
CardBus I/O base register 0
2Ch
CardBus I/O limit register 0
30h
CardBus I/O base register 1
34h
CardBus I/O limit register 1
38h
Interrupt pin
Subsystem ID
Interrupt line
Subsystem vendor ID
3Ch
40h
PC Card 16-bit I/F legacy-mode base address
44h
Reserved
48h−7Ch
System control
80h
Reserved
84h−88h
Multifunction routing
Device control
8Ch
Card control
Retry status
Reserved
Power-management capabilities
Power-management data
18h
CardBus Memory base register 0
Bridge control
Diagnostic
14h
Next-item pointer
Power-management
control/status bridge
support extensions
90h
94h−9Ch
Capability ID
Power-management control/status
A0h
A4h
General-purpose event enable
General-purpose event status
A8h
General-purpose output
General-purpose input
ACh
Serial bus control/status
Serial bus slave address
Reserved
Serial bus index
Serial bus data
B0h
B4h−FCh
4−1
A bit description table, typically included when a register contains bits of more than one type or purpose, indicates
bit field names, which appear in the signal column; a detailed field description, which appears in the function column;
and field access tags, which appear in the type column of the bit description table. Table 4−2 describes the field
access tags.
Table 4−2. Bit Field Access Tag Descriptions
ACCESS TAG
NAME
R
Read
Field may be read by software.
W
Write
Field may be written by software to any value.
S
Set
C
Clear
U
Update
MEANING
Field may be set by a write of 1. Writes of 0 have no effect.
Field may be cleared by a write of 1. Writes of 0 have no effect.
Field may be autonomously updated by the PCI1520.
4.2 Vendor ID Register
This 16-bit register contains a value allocated by the PCI Special Interest Group (SIG) and identifies the manufacturer
of the PCI device. The vendor ID assigned to TI is 104Ch.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
0
0
0
1
0
0
0
0
Name
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
1
0
0
1
1
0
0
Vendor ID
Register:
Offset:
Type:
Default:
Vendor ID
00h (functions 0, 1)
Read-only
104Ch
4.3 Device ID Register
This 16-bit register contains a value assigned to the PCI1520 by TI. The device identification for the PCI1520 is
AC55h.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Device ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
1
0
1
0
1
1
0
0
0
1
0
1
0
1
0
1
Register:
Offset:
Type:
Default:
4−2
Device ID
02h (functions 0, 1)
Read-only
AC55h
4.4 Command Register
The command register provides control over the PCI1520 interface to the PCI bus. All bit functions adhere to the
definitions in PCI Local Bus Specification. None of the bit functions in this register is shared between the two PCI1520
PCI functions. Two command registers exist in the PCI1520, one for each function. Software must manipulate the
two PCI1520 functions as separate entities when enabling functionality through the command register. The
SERR_EN and PERR_EN enable bits in this register are internally wired-OR between the two functions, and these
control bits appear separately according to their software function. See Table 4−3 for a complete description of the
register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Command
Type
R
R
R
R
R
R
R
RW
R
RW
RW
R
R
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Command
04h
Read-only, Read/Write
0000h
Table 4−3. Command Register Description
BIT
SIGNAL
TYPE
15−10
RSVD
R
Reserved. Bits 15−10 return 0s when read.
FUNCTION
9
FBB_EN
R
Fast back-to-back enable. The PCI1520 does not generate fast back-to-back transactions; therefore, bit 9
returns 0 when read.
8
SERR_EN
RW
System error (SERR) enable. Bit 8 controls the enable for the SERR driver on the PCI interface. SERR can
be asserted after detecting an address parity error on the PCI bus. Both bits 8 and 6 must be set for the
PCI1520 to report address parity errors.
0 = Disable SERR output driver (default)
1 = Enable SERR output driver
7
STEP_EN
R
Address/data stepping control. The PCI1520 does not support address/data stepping; therefore, bit 7 is
hardwired to 0.
6
PERR_EN
RW
Parity error response enable. Bit 6 controls the PCI1520 response to parity errors through PERR. Data parity
errors are indicated by asserting PERR, whereas address parity errors are indicated by asserting SERR.
0 = PCI1520 ignores detected parity error (default)
1 = PCI1520 responds to detected parity errors
5
VGA_EN
RW
VGA palette snoop. Bit 5 controls how PCI devices handle accesses to video graphics array (VGA) palette
registers.
4
MWI_EN
R
Memory write-and-invalidate enable. Bit 4 controls whether a PCI initiator device can generate memory
write-and-Invalidate commands. The PCI1520 controller does not support memory write-and-invalidate
commands, but uses memory write commands instead; therefore, this bit is hardwired to 0.
3
SPECIAL
R
Special cycles. Bit 3 controls whether or not a PCI device ignores PCI special cycles. The PCI1520 does
not respond to special cycle operations; therefore, this bit is hardwired to 0.
2
MAST_EN
RW
Bus master control. Bit 2 controls whether or not the PCI1520 can act as a PCI bus initiator (master). The
PCI1520 can take control of the PCI bus only when this bit is set.
0 = Disables the PCI1520 from generating PCI bus accesses (default)
1 = Enables the PCI1520 to generate PCI bus accesses
1
MEM_EN
RW
Memory space enable. Bit 1 controls whether or not the PCI1520 can claim cycles in PCI memory space.
0 = Disables the PCI1520 from responding to memory space accesses (default)
1 = Enables the PCI1520 to respond to memory space accesses
0
IO_EN
RW
I/O space control. Bit 0 controls whether or not the PCI1520 can claim cycles in PCI I/O space.
0 = Disables the PCI1520 from responding to I/O space accesses (default)
1 = Enables the PCI1520 to respond to I/O space accesses
4−3
4.5 Status Register
The status register provides device information to the host system. Bits in this register can be read normally. A bit
in the status register is reset when a 1 is written to that bit location; a 0 written to a bit location has no effect. All bit
functions adhere to the definitions in the PCI Local Bus Specification. PCI bus status is shown through each function.
See Table 4−4 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RC
RC
RC
RC
RC
R
R
RC
0
0
0
0
0
0
1
R
R
R
R
R
R
R
R
0
0
0
0
1
0
0
0
0
Name
Type
Default
Status
Register:
Offset:
Type:
Default:
Status
06h (functions 0, 1)
Read-only, Read/Clear
0210h
Table 4−4. Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
15
PAR_ERR
RC
Detected parity error. Bit 15 is set when a parity error is detected (either address or data).
14
SYS_ERR
RC
Signaled system error. Bit 14 is set when SERR is enabled and the PCI1520 signals a system error to the host.
13
MABORT
RC
Received master abort. Bit 13 is set when a cycle initiated by the PCI1520 on the PCI bus is terminated by a
master abort.
12
TABT_REC
RC
Received target abort. Bit 12 is set when a cycle initiated by the PCI1520 on the PCI bus is terminated by a target
abort.
11
TABT_SIG
RC
Signaled target abort. Bit 11 is set by the PCI1520 when it terminates a transaction on the PCI bus with a target
abort.
10−9
PCI_SPEED
R
DEVSEL timing. These bits encode the timing of DEVSEL and are hardwired 01b, indicating that the PCI1520
asserts PCI_SPEED at a medium speed on nonconfiguration cycle accesses.
Data parity error detected.
0 = The conditions for setting bit 8 have not been met.
1 = A data parity error occurred, and the following conditions were met:
a. PERR was asserted by any PCI device including the PCI1520.
b. The PCI1520 was the bus master during the data parity error.
c. The parity error response bit is set in the command register (PCI offset 04h, see Section 4.4).
8
DATAPAR
RC
7
FBB_CAP
R
Fast back-to-back capable. The PCI1520 cannot accept fast back-to-back transactions; therefore, bit 7 is
hardwired to 0.
6
UDF
R
User-definable feature support. The PCI1520 does not support the user-definable features; therefore, bit 6 is
hardwired to 0.
5
66MHZ
R
66-MHz capable. The PCI1520 operates at a maximum PCLK frequency of 33 MHz; therefore, bit 5 is hardwired
to 0.
4
CAPLIST
R
Capabilities list. Bit 4 returns 1 when read. This bit indicates that capabilities in addition to standard PCI
capabilities are implemented. The linked list of PCI power-management capabilities is implemented in this
function.
3−0
RSVD
R
Reserved. Bits 3−0 return 0s when read.
4−4
4.6 Revision ID Register
The revision ID register indicates the silicon revision of the PCI1520.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
Default
0
0
0
R
R
R
R
0
0
0
0
1
Name
Revision ID
Register:
Offset:
Type:
Default:
Revision ID
08h (functions 0, 1)
Read-only
01h
4.7 PCI Class Code Register
The class code register recognizes PCI1520 functions 0 and 1 as a bridge device (06h) and a CardBus bridge device
(07h), with a 00h programming interface.
Bit
23
22
21
20
19
18
17
16
15
14
Name
13
12
11
10
9
8
7
6
5
4
3
2
1
0
PCI class code
Base class
Subclass
Programming interface
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
1
1
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
PCI class code
09h (functions 0, 1)
Read-only
06 0700h
4.8 Cache Line Size Register
The cache line size register is programmed by host software to indicate the system cache line size.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Cache line size
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Cache line size
0Ch (functions 0, 1)
Read/Write
00h
4−5
4.9 Latency Timer Register
The latency timer register specifies the latency time for the PCI1520 in units of PCI clock cycles. When the PCI1520
is a PCI bus initiator and asserts FRAME, the latency timer begins counting from zero. If the latency timer expires
before the PCI1520 transaction has terminated, then the PCI1520 terminates the transaction when its GNT is
deasserted. This register is separate for each of the two PCI1520 functions. This allows platforms to prioritize use
of the PCI bus by the two PCI1520 functions.
Bit
7
6
5
4
3
2
1
0
RW
RW
RW
RW
0
0
0
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
Latency timer
Register:
Offset:
Type:
Default:
Latency timer
0Dh
Read/Write
00h
4.10 Header Type Register
This register returns 82h when read, indicating that the PCI1520 function 0 and 1 configuration spaces adhere to the
CardBus bridge PCI header. The CardBus bridge PCI header ranges from PCI register 000h to 7Fh, and 80h to FFh
is user-definable extension registers.
Bit
7
6
5
4
Name
3
2
1
0
Header type
Type
R
R
R
R
R
R
R
R
Default
1
0
0
0
0
0
1
0
Register:
Offset:
Type:
Default:
Header type
0Eh (functions 0, 1)
Read/Write
82h
4.11 BIST Register
Because the PCI1520 does not support a built-in self-test (BIST), this register returns the value of 00h when read.
Bit
7
6
5
4
Name
3
2
1
0
BIST
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
4−6
BIST
0Fh (functions 0, 1)
Read-only
00h
4.12 CardBus Socket/ExCA Base-Address Register
The CardBus socket/ExCA base-address register is programmed with a base address referencing the CardBus
socket registers and the memory-mapped ExCA register set. Bits 31−12 are read/write and allow the base address
to be located anywhere in the 32-bit PCI memory address space on a 4-Kbyte boundary. Bits 11−0 are read-only,
returning 0s when read. When software writes all 1s to this register, the value read back is FFFF F000h, indicating
that at least 4 Kbytes of memory address space are required. The CardBus registers start at offset 000h, and the
memory-mapped ExCA registers begin at offset 800h. Because this register is not shared by functions 0 and 1,
mapping of each socket control is performed separately.
Bit
31
30
29
28
27
26
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
RW
RW
RW
RW
R
R
R
R
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
24
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
6
5
4
3
2
1
0
R
R
R
R
R
R
R
0
0
0
0
0
0
0
CardBus socket/ExCA base-address
Name
Type
25
CardBus socket/ExCA base-address
Register:
Offset:
Type:
Default:
CardBus socket/ExCA base-address
10h
Read-only, Read/Write
0000 0000h
4.13 Capability Pointer Register
The capability pointer register provides a pointer into the PCI configuration header where the PCI
power-management register block resides. PCI header doublewords at A0h and A4h provide the power-management
(PM) registers. Each socket has its own capability pointer register. This register returns A0h when read.
Bit
7
6
5
Name
4
3
2
1
0
Capability pointer
Type
R
R
R
R
R
R
R
R
Default
1
0
1
0
0
0
0
0
Register:
Offset:
Type:
Default:
Capability pointer
14h
Read-only
A0h
4−7
4.14 Secondary Status Register
The secondary status register is compatible with the PCI-to-PCI bridge secondary status register and indicates
CardBus-related device information to the host system. This register is very similar to the status register (offset 06h,
see Section 4.5); status bits are cleared by writing a 1. See Table 4−5 for a complete description of the register
contents.
Bit
15
14
13
12
11
10
9
RC
RC
RC
RC
RC
R
R
RC
0
0
0
0
0
0
1
0
Name
Type
Default
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
Secondary status
Register:
Offset:
Type:
Default:
Secondary status
16h
Read-only, Read/Clear
0200h
Table 4−5. Secondary Status Register Description
BIT
SIGNAL
TYPE
15
CBPARITY
RC
Detected parity error. Bit 15 is set when a CardBus parity error is detected (either address or data).
14
CBSERR
RC
Signaled system error. Bit 14 is set when CSERR is signaled by a CardBus card. The PCI1520 does not
assert CSERR.
13
CBMABORT
RC
Received master abort. Bit 13 is set when a cycle initiated by the PCI1520 on the CardBus bus has been
terminated by a master abort.
12
REC_CBTA
RC
Received target abort. Bit 12 is set when a cycle initiated by the PCI1520 on the CardBus bus is terminated
by a target abort.
11
SIG_CBTA
RC
Signaled target abort. Bit 11 is set by the PCI1520 when it terminates a transaction on the CardBus bus
with a target abort.
10−9
CB_SPEED
R
CDEVSEL timing. These bits encode the timing of CDEVSEL and are hardwired 01b, indicating that the
PCI1520 asserts CB_SPEED at a medium speed.
4−8
FUNCTION
CardBus data parity error detected.
0 = The conditions for setting bit 8 have not been met.
1 = A data parity error occurred and the following conditions were met:
a. CPERR was asserted on the CardBus interface.
b. The PCI1520 was the bus master during the data parity error.
c. The parity error response bit is set in the bridge control.
8
CB_DPAR
RC
7
CBFBB_CAP
R
Fast back-to-back capable. The PCI1520 cannot accept fast back-to-back transactions; therefore, bit 7
is hardwired to 0.
6
CB_UDF
R
User-definable feature support. The PCI1520 does not support user-definable features; therefore, bit 6
is hardwired to 0.
5
CB66MHZ
R
66-MHz capable. The PCI1520 CardBus interface operates at a maximum CCLK frequency of 33 MHz;
therefore, bit 5 is hardwired to 0.
4−0
RSVD
R
Reserved. Bits 4−0 return 0s when read.
4.15 PCI Bus Number Register
This register is programmed by the host system to indicate the bus number of the PCI bus to which the PCI1520 is
connected. The PCI1520 uses this register in conjunction with the CardBus bus number and subordinate bus number
registers to determine when to forward PCI configuration cycles to its secondary buses.
Bit
7
6
5
4
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
0
0
0
0
PCI bus number
Register:
Offset:
Type:
Default:
PCI bus number
18h (functions 0, 1)
Read/Write
00h
4.16 CardBus Bus Number Register
This register is programmed by the host system to indicate the bus number of the CardBus bus to which the PCI1520
is connected. The PCI1520 uses this register in conjunction with the PCI bus number and subordinate bus number
registers to determine when to forward PCI configuration cycles to its secondary buses. This register is separate for
each PCI1520 controller function.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
CardBus bus number
Register:
Offset:
Type:
Default:
CardBus bus number
19h
Read/Write
00h
4.17 Subordinate Bus Number Register
This register is programmed by the host system to indicate the highest-numbered bus below the CardBus bus. The
PCI1520 uses this register in conjunction with the PCI bus number and CardBus bus number registers to determine
when to forward PCI configuration cycles to its secondary buses. This register is separate for each CardBus controller
function.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
Subordinate bus number
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subordinate bus number
1Ah
Read/Write
00h
4−9
4.18 CardBus Latency Timer Register
This register is programmed by the host system to specify the latency timer for the PCI1520 CardBus interface in units
of CCLK cycles. When the PCI1520 is a CardBus initiator and asserts CFRAME, the CardBus latency timer begins
counting. If the latency timer expires before the PCI1520 transaction has terminated, then the PCI1520 terminates
the transaction at the end of the next data phase. A recommended minimum value for this register is 40h, which allows
most transactions to be completed.
Bit
7
6
5
4
RW
RW
RW
RW
0
0
0
0
Name
3
2
1
0
RW
RW
RW
RW
0
0
0
0
CardBus latency timer
Type
Default
Register:
Offset:
Type:
Default:
CardBus latency timer
1Bh (functions 0, 1)
Read/Write
00h
4.19 Memory Base Registers 0, 1
The memory base registers indicate the lower address of a PCI memory address range. These registers are used
by the PCI1520 to determine when to forward a memory transaction to the CardBus bus and when to forward a
CardBus cycle to PCI. Bits 31−12 of these registers are read/write and allow the memory base to be located anywhere
in the 32-bit PCI memory space on 4-Kbyte boundaries. Bits 11−0 are read-only and always return 0s. Write
transactions to these bits have no effect. Bits 8 and 9 of the bridge control register specify whether memory windows
0 and 1 are prefetchable or nonprefetchable. The memory base register or the memory limit register must be nonzero
for the PCI1520 to claim any memory transactions through CardBus memory windows (that is, these windows are
not enabled by default to pass the first 4 Kbytes of memory to CardBus).
Bit
31
30
29
28
27
26
Name
Type
25
24
23
22
21
20
19
18
17
16
Memory base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Memory base registers 0, 1
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
4−10
Memory base registers 0, 1
1Ch, 24h
Read-only, Read/Write
0000 0000h
4.20 Memory Limit Registers 0, 1
The memory limit registers indicate the upper address of a PCI memory address range. These registers are used
by the PCI1520 to determine when to forward a memory transaction to the CardBus bus and when to forward a
CardBus cycle to PCI. Bits 31−12 of these registers are read/write and allow the memory base to be located anywhere
in the 32-bit PCI memory space on 4-Kbyte boundaries. Bits 11−0 are read-only and always return 0s. Write
transactions to these bits have no effect. Bits 8 and 9 of the bridge control register specify whether memory windows
0 and 1 are prefetchable or nonprefetchable. The memory base register or the memory limit register must be nonzero
for the PCI1520 to claim any memory transactions through CardBus memory windows; that is, these windows are
not enabled by default to pass the first 4 Kbytes of memory to CardBus.
Bit
31
30
29
28
27
26
25
RW
RW
RW
RW
RW
RW
RW
RW
RW
Name
Type
24
23
22
21
20
19
18
17
16
RW
RW
RW
RW
RW
RW
RW
Memory limit registers 0, 1
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Type
Default
Memory limit registers 0, 1
Register:
Offset:
Type:
Default:
Memory limit registers 0, 1
20h, 28h
Read-only, Read/Write
0000 0000h
4.21 I/O Base Registers 0, 1
The I/O base registers indicate the lower address of a PCI I/O address range. These registers are used by the
PCI1520 to determine when to forward an I/O transaction to the CardBus bus and when to forward a CardBus cycle
to the PCI bus. The lower 16 bits of this register locate the bottom of the I/O window within a 64-Kbyte page, and the
upper 16 bits (31−16) are a page register which locates this 64-Kbyte page in 32-bit PCI I/O address space. Bits 31−2
are read/write. Bits 1 and 0 are read-only and always return 0s, forcing I/O windows to be aligned on a natural
doubleword boundary.
NOTE: Either the I/O base register or the I/O limit register must be nonzero to enable any I/O
transactions.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
I/O base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
I/O base registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
I/O base registers 0, 1
2Ch, 34h
Read-only, Read/Write
0000 0000h
4−11
4.22 I/O Limit Registers 0, 1
The I/O limit registers indicate the upper address of a PCI I/O address range. These registers are used by the PCI1520
to determine when to forward an I/O transaction to the CardBus bus and when to forward a CardBus cycle to PCI.
The lower 16 bits of this register locate the top of the I/O window within a 64-Kbyte page, and the upper 16 bits are
a page register that locates this 64-Kbyte page in 32-bit PCI I/O address space. Bits 15−2 are read/write and allow
the I/O limit address to be located anywhere in the 64-Kbyte page (indicated by bits 31−16 of the appropriate I/O base)
on doubleword boundaries.
Bits 31−16 are read-only and always return 0s when read. The page is set in the I/O base register. Bits 1 and 0 are
read-only and always return 0s, forcing I/O windows to be aligned on a natural doubleword boundary. Write
transactions to read-only bits have no effect. The PCI1520 assumes that the lower 2 bits of the limit address are 1s.
NOTE: The I/O base or the I/O limit register must be nonzero to enable an I/O transaction.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
I/O limit registers 0, 1
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
I/O limit registers 0, 1
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
I/O limit registers 0, 1
30h, 38h
Read-only, Read/Write
0000 0000h
4.23 Interrupt Line Register
The interrupt line register communicates interrupt line routing information. Each PCI1520 function has an interrupt
line register.
Bit
7
6
5
4
Name
Type
Default
2
1
0
RW
RW
RW
RW
RW
RW
RW
RW
1
1
1
1
1
1
1
1
Register:
Offset:
Type:
Default:
4−12
3
Interrupt line
Interrupt line
3Ch
Read/Write
FFh
4.24 Interrupt Pin Register
The value read from the interrupt pin register is function dependent and depends on the interrupt signaling mode,
selected through bits 2−1 (INTMODE field) of the device control register (PCI offset 92h, see Section 4.33) and the
state of bit 29 (INTRTIE) in the system control register (PCI offset 80h, see Section 4.29). When the INTRTIE bit is
set, this register reads 01h (INTA) for both functions. See Table 4−6 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
X
X
Name
Interrupt pin
Register:
Offset:
Type:
Default:
Interrupt pin
3Dh
Read-only
0Xh
Table 4−6. Interrupt Pin Register Cross Reference
INTPIN
INTRTIE BIT
FUNCTION 0
FUNCTION 1
0
01h
02h
1
01h
01h
4−13
4.25 Bridge Control Register
The bridge control register provides control over various PCI1520 bridging functions. Some bits in this register are
global and are accessed only through function 0. See Table 4−7 for a complete description of the register contents.
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Bridge control
Type
R
R
R
R
R
RW
RW
RW
RW
RW
RW
R
RW
RW
RW
RW
Default
0
0
0
0
0
0
1
1
0
1
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Bridge control
3Eh (functions 0, 1)
Read-only, Read/Write
0340h
Table 4−7. Bridge Control Register Description
BIT
SIGNAL
TYPE
15−11
RSVD
R
10
POSTEN
FUNCTION
Reserved. Bits 15−11 return 0s when read.
RW
Write posting enable. Enables write posting to and from the CardBus sockets. Write posting enables
posting of write data on burst cycles. Operating with write posting disabled inhibits performance on burst
cycles. Note that burst write data can be posted, but various write transactions may not. Bit 10 is socket
dependent and is not shared between functions 0 and 1.
9
PREFETCH1
RW
Memory window 1 type. Bit 9 specifies whether or not memory window 1 is prefetchable. This bit is socket
dependent. Bit 9 is encoded as:
0 = Memory window 1 is nonprefetchable.
1 = Memory window 1 is prefetchable (default).
8
PREFETCH0
RW
Memory window 0 type. Bit 8 specifies whether or not memory window 0 is prefetchable. This bit is
encoded as:
0 = Memory window 0 is nonprefetchable.
1 = Memory window 0 is prefetchable (default).
7
INTR
RW
PCI interrupt − IREQ routing enable. Bit 7 selects whether PC Card functional interrupts are routed to PCI
interrupts or the IRQ specified in the ExCA registers.
0 = Functional interrupts routed to PCI interrupts (default)
1 = Functional interrupts routed by ExCAs
RW
CardBus reset. When bit 6 is set, CRST is asserted on the CardBus interface. CRST can also be asserted
by passing a PRST assertion to CardBus.
0 = CRST deasserted
1 = CRST asserted (default)
Master abort mode. Bit 5 controls how the PCI1520 responds to a master abort when the PCI1520 is an
initiator on the CardBus interface. This bit is common between each socket.
0 = Master aborts not reported (default)
1 = Signal target abort on PCI and SERR (if enabled)
6
CRST
5†
MABTMODE
RW
4
RSVD
R
3
VGAEN
RW
VGA enable. Bit 3 affects how the PCI1520 responds to VGA addresses. When this bit is set, accesses
to VGA addresses are forwarded.
2
ISAEN
RW
ISA mode enable. Bit 2 affects how the PCI1520 passes I/O cycles within the 64-Kbyte ISA range. This
bit is not common between sockets. When this bit is set, the PCI1520 does not forward the last 768 bytes
of each 1K I/O range to CardBus.
Reserved. Bit 4 returns 0 when read.
1†
CSERREN
RW
CSERR enable. Bit 1 controls the response of the PCI1520 to CSERR signals on the CardBus bus. This
bit is common between the two sockets.
0 = CSERR is not forwarded to PCI SERR.
1 = CSERR is forwarded to PCI SERR.
0†
CPERREN
RW
CardBus parity error response enable. Bit 0 controls the response of the PCI1520 to CardBus parity errors.
This bit is common between the two sockets.
0 = CardBus parity errors are ignored.
1 = CardBus parity errors are reported using CPERR.
† This bit is global and is accessed only through function 0.
4−14
4.26 Subsystem Vendor ID Register
The subsystem vendor ID register is used for system and option-card identification purposes and may be required
for certain operating systems. This register is read-only or read/write, depending on the setting of bit 5 (SUBSYSRW)
in the system control register (PCI offset 80h, see Section 4.29).
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Subsystem vendor ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem vendor ID
40h (functions 0, 1)
Read-only (Read/Write if enabled by SUBSYSRW)
0000h
4.27 Subsystem ID Register
The subsystem ID register is used for system and option-card identification purposes and may be required for certain
operating systems. This register is read-only or read/write, depending on the setting of bit 5 (SUBSYSRW) in the
system control register (PCI offset 80h, see Section 4.29).
Bit
15
14
13
12
11
10
9
Name
8
7
6
5
4
3
2
1
0
Subsystem ID
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Subsystem ID
42h (functions 0, 1)
Read-only (Read/Write if enabled by SUBSYSRW)
0000h
4.28 PC Card 16-Bit I/F Legacy-Mode Base Address Register
The PCI1520 supports the index/data scheme of accessing the ExCA registers, which are mapped by this register.
An address written to this register is the address for the index register and the address + 1 is the data address. Using
this access method, applications requiring index/data ExCA access can be supported. The base address can be
mapped anywhere in 32-bit I/O space on a word boundary; hence, bit 0 is read-only, returning 1 when read. As
specified in the PCI to PCMCIA CardBus Bridge Register Description (Yenta), this register is shared by functions 0
and 1. See Section 5, ExCA Compatibility Registers, for register offsets.
Bit
31
30
29
28
27
Name
Type
26
25
24
23
22
21
20
19
18
17
16
PC Card 16-bit I/F legacy-mode base address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
PC Card 16-bit I/F legacy-mode base address
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Register:
Offset:
Type:
Default:
PC Card 16-bit I/F legacy-mode base address
44h (functions 0, 1)
Read-only, Read/Write
0000 0001h
4−15
4.29 System Control Register
System-level initializations are performed by programming this doubleword register. Some of the bits are global and
are written only through function 0. See Table 4−8 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
Type
24
23
22
21
20
19
18
17
16
System control
RW
RW
RW
R
RW
RW
RC
RW
R
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
1
0
0
0
1
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
System control
RW
RW
R
R
R
R
R
R
R
RW
RW
RW
RW
RW
RW
RW
1
0
0
1
0
0
0
0
0
1
1
0
0
0
0
0
Register:
Offset:
Type:
Default:
4−16
System control
80h (functions 0, 1)
Read-only, Read/Write, Read/Clear
0044 9060h
Table 4−8. System Control Register Description
BIT
31−30†
SIGNAL
SER_STEP
TYPE
FUNCTION
RW
Serialized PCI interrupt routing step. Bits 31 and 30 configure the serialized PCI interrupt stream signaling
and accomplish an even distribution of interrupts signaled on the four PCI interrupt slots. Bits 31 and 30 are
global to all PCI1520 functions.
00 = INTA/INTB signal in INTA/INTB IRQSER slots
01 = INTA/INTB signal in INTB/INTC IRQSER slots
10 = INTA/INTB signal in INTC/INTD IRQSER slots
11 = INTA/INTB signal in INTD/INTA IRQSER slots
Tie internal PCI interrupts. When this bit is set, the INTA and INTB signals are tied together internally and are
signaled as INTA. INTA can then be shifted by using bits 31−30 (SER_STEP). This bit is global to all PCI1520
functions.
When configuring the PCI1520 functions to share PCI interrupts, multifunction terminal MFUNC3 must be
configured as IRQSER prior to setting the INTRTIE bit.
29†
INTRTIE
RW
28
RSVD
R
27†
P2CCLK
Reserved. Bit 28 returns 0 when read.
RW
P2C power switch clock. The PCI1520 CLOCK signal is used to clock the serial interface power switch and
the internal state machine. The default state for bit 27 is 0, requiring an external clock source provided to the
CLOCK terminal (terminal number F15 for the GHK package or terminal number 154 for the PDV package).
Bit 27 can be set to 1, allowing the internal oscillator to provide the clock signal.
0 = CLOCK provided externally, input to PCI1520 (default)
1 = CLOCK generated by internal oscillator and driven by PCI1520.
26
SMIROUTE
RW
SMI interrupt routing. Bit 26 is shared between functions 0 and 1, and selects whether IRQ2 or CSC is signaled
when a write occurs to power a PC Card socket.
0 = PC Card power change interrupts routed to IRQ2 (default)
1 = A CSC interrupt is generated on PC Card power changes.
25
SMISTATUS
RC
SMI interrupt status. This socket-dependent bit is set when bit 24 (SMIENB) is set and a write occurs to set
the socket power. Writing a 1 to bit 25 clears the status.
0 = SMI interrupt signaled (default)
1 = SMI interrupt not signaled
24†
SMIENB
RW
SMI interrupt mode enable. When bit 24 is set and a write to the socket power control occurs, the SMI interrupt
signaling is enabled and generates an interrupt. This bit is shared and defaults to 0 (disabled).
23
RSVD
R
Reserved. Bit 23 returns 0 when read.
CardBus reserved terminals signaling. When a CardBus card is inserted and bit 22 is set, the RSVD CardBus
terminals are driven low. When this bit is 0, these terminals are placed in a high-impedance state.
0 = Place CardBus RSVD terminals in a high-impedance state.
1 = Drive Cardbus RSVD terminals low (default).
22
CBRSVD
RW
21
VCCPROT
RW
20
REDUCEZV
RW
19−16
RSVD
RW
Reserved. Do not change the default value.
15†
MRBURSTD
N
RW
Memory read burst enable downstream. When bit 15 is set, memory read transactions are allowed to burst
downstream.
0 = Downstream memory read burst is disabled.
1 = Downstream memory read burst is enabled (default).
14†
MRBURSTU
P
RW
Memory read burst enable upstream. When bit 14 is set, the PCI1520 allows memory read transactions to
burst upstream.
0 = Upstream memory read burst is disabled (default).
1 = Upstream memory read burst is enabled.
13
SOCACTIV
E
R
Socket activity status. When set, bit 13 indicates access has been performed to or from a PC card and is
cleared upon read of this status bit. This bit is socket-dependent.
0 = No socket activity (default)
1 = Socket activity
12
RSVD
R
Reserved. Bit 12 returns 1 when read.
VCC protection enable. Bit 21 is socket dependent.
0 = VCC protection enabled for 16-bit cards (default)
1 = VCC protection disabled for 16-bit cards
Reduced zoomed video enable. When this bit is enabled, terminals A25−A22 of the card interface for PC
Card-16 cards are placed in the high-impedance state. This bit should not be set for normal ZV operation. This
bit is encoded as:
0 = Reduced zoomed video disabled (default)
1 = Reduced zoomed video enabled
† This bit is global and is accessed only through function 0.
4−17
Table 4−8. System Control Register Description (Continued)
BIT
SIGNAL
TYPE
FUNCTION
11†
PWRSTREAM
R
Power stream in progress status bit. When set, bit 11 indicates that a power stream to the power switch
is in progress and a powering change has been requested. This bit is cleared when the power stream is
complete.
0 = Power stream is complete and delay has expired.
1 = Power stream is in progress.
10†
DELAYUP
R
Power-up delay in progress status. When set, bit 10 indicates that a power-up stream has been sent to
the power switch and proper power may not yet be stable. This bit is cleared when the power-up delay has
expired.
9†
DELAYDOWN
R
Power-down delay in progress status. When set, bit 9 indicates that a power-down stream has been sent
to the power switch and proper power may not yet be stable. This bit is cleared when the power-down delay
has expired.
8
INTERROGATE
R
Interrogation in progress. When set, bit 8 indicates an interrogation is in progress and clears when
interrogation completes. This bit is socket dependent.
0 = Interrogation not in progress (default)
1 = Interrogation in progress
7
RSVD
R
Reserved. Bit 7 returns 0 when read.
6
PWRSAVINGS
RW
Power savings mode enable. When this bit is set, if a CB card is inserted, idle, and without a CB clock,
then the applicable CB state machine will not be clocked.
5†
SUBSYSRW
RW
Subsystem ID (PCI offset 42h, see Section 4.27), subsystem vendor ID (PCI offset 40H, see
Section 4.26), ExCA identification and revision (ExCA offset 00h/40h/800h, see Section 5.1) registers
read/write enable. Bit 5 is shared by functions 0 and 1.
0 = Subsystem ID, subsystem vendor ID, ExCA identification and revision registers are read/write.
1 = Subsystem ID, subsystem vendor ID, ExCA identification and revision registers are read-only
(default).
4†
CB_DPAR
RW
CardBus data parity SERR signaling enable
0 = CardBus data parity not signaled on PCI SERR
1 = CardBus data parity signaled on PCI SERR
3
RSVD
RW
Reserved. Do not change the default value.
2
EXCAPOWER
RW
ExCA power-control bit.
0 = Enables 3.3 V
1 = Enables 5 V
1†
KEEPCLK
RW
Keep clock. This bit works with PCI and CB CLKRUN protocols.
0 = Allows normal functioning of both CLKRUN protocols (default)
1 = Does not allow CB clock or PCI clock to be stopped using the CLKRUN protocols
RW
RI_OUT/PME multiplex enable.
0 = RI_OUT and PME are both routed to the RI_OUT/PME terminal. If both functions are are enabled
at the same time, the terminal becomes RI_OUT only and PME assertions are not seen.
1 = Only PME is routed to the RI_OUT/PME terminal.
0
RIMUX
† This bit is global and is accessed only through function 0.
4−18
4.30 Multifunction Routing Register
The multifunction routing register is used to configure the MFUNC0−MFUNC6 terminals. These terminals may be
configured for various functions. All multifunction terminals default to the general-purpose input configuration. This
register is intended to be programmed once at power-on initialization. The default value for this register can also be
loaded through a serial bus EEPROM. See Table 4−9 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
Name
24
23
22
21
20
19
18
17
16
Multifunction routing
Type
R
R
R
R
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Multifunction routing
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
Multifunction routing
8Ch (functions 0, 1)
Read-only, Read/Write
0000 1000h
Table 4−9. Multifunction Routing Register Description
BIT
SIGNAL
TYPE
31−28
RSVD
R
27−24
23−20
MFUNC6
MFUNC5
FUNCTION
Bits 31−28 return 0s when read.
RW
Multifunction terminal 6 configuration. These bits control the internal signal mapped to the MFUNC6 terminal
as follows:
0000 = RSVD†
0100 = IRQ4
1000 = IRQ8
1100 = IRQ12
0001 = CLKRUN
0101 = IRQ5
1001 = IRQ9
1101 = IRQ13
0010 = IRQ2
0110 = IRQ6
1010 = IRQ10
1110 = IRQ14
0011 = IRQ3
0111 = IRQ7
1011 = IRQ11
1111 = IRQ15
RW
Multifunction terminal 5 configuration. These bits control the internal signal mapped to the MFUNC5 terminal
as follows:
0000 = GPI4†
0100 = IRQ4
1000 = CAUDPWM
1100 = LEDA1
0001 = GPO4
0101 = IRQ5
1001 = D3_STAT
1101 = LED_SKT
0010 = PCGNT
0110 = ZVSTAT
1010 = IRQ10
1110 = GPE
0011 = IRQ3
0111 = ZVSEL1
1011 = IRQ11
1111 = IRQ15
Multifunction terminal 4 configuration. These bits control the internal signal mapped to the MFUNC4 terminal
as follows:
19−16
MFUNC4
RW
NOTE: When the serial bus mode is implemented by pulling down the LATCH terminal, the MFUNC4 terminal
provides the SCL signaling.
0000 = GPI3†
0001 = GPO3
0010 = LOCK PCI
0011 = IRQ3
15−12
11−8
MFUNC3
MFUNC2
0100 = IRQ4
0101 = IRQ5
0110 = ZVSTAT
0111 = ZVSEL1
1000 = CAUDPWM
1001 = IRQ9
1010 = IRQ10
1011 = IRQ11
1100 = RI_OUT
1101 = LED_SKT
1110 = GPE
1111 = D3_STAT
RW
Multifunction terminal 3 configuration. These bits control the internal signal mapped to the MFUNC3 terminal
as follows:
0000 = RSVD
0100 = IRQ4
1000 = IRQ8
1100 = IRQ12
0001 = IRQSER†
0101 = IRQ5
1001 = IRQ9
1101 = IRQ13
0010 = IRQ2
0110 = IRQ6
1010 = IRQ10
1110 = IRQ14
0011 = IRQ3
0111 = IRQ7
1011 = IRQ11
1111 = IRQ15
RW
Multifunction terminal 2 configuration. These bits control the internal signal mapped to the MFUNC2 terminal
as follows:
0000 = GPI2†
0100 = IRQ4
1000 = CAUDPWM
1100 = RI_OUT
0001 = GPO2
0101 = IRQ5
1001 = IRQ9
1101 = LEDA2
0010 = PCREQ
0110 = ZVSTAT
1010 = IRQ10
1110 = GPE
0011 = IRQ3
0111 = ZVSEL0
1011 = D3_STAT
1111 = IRQ7
4−19
Table 4−9. Multifunction Routing Register Description (Continued)
BIT
SIGNAL
TYPE
FUNCTION
Multifunction terminal 1 configuration. These bits control the internal signal mapped to the MFUNC1 terminal
as follows:
7−4
MFUNC1
RW
NOTE: When the serial bus mode is implemented by pulling down the LATCH terminal, the MFUNC1 terminal
provides the SDA signaling.
0000 = GPI1†
0001 = GPO1
0010 = INTB
0011 = IRQ3
3−0
MFUNC0
† Default value
4−20
RW
0100 = IRQ4
0101 = IRQ5
0110 = ZVSTAT
0111 = ZVSEL0
1000 = CAUDPWM
1001 = IRQ9
1010 = IRQ10
1011 = IRQ11
1100 = LEDA1
1101 = LEDA2
1110 = GPE
1111 = IRQ15
Multifunction terminal 0 configuration. These bits control the internal signal mapped to the MFUNC0 terminal
as follows:
0000 = GPI0†
0100 = IRQ4
1000 = CAUDPWM
1100 = LEDA1
0001 = GPO0
0101 = IRQ5
1001 = IRQ9
1101 = LEDA2
0010 = INTA
0110 = ZVSTAT
1010 = IRQ10
1110 = GPE
0011 = IRQ3
0111 = ZVSEL0
1011 = IRQ11
1111 = IRQ15
4.31 Retry Status Register
The retry status register enables the retry timeout counters and displays the retry expiration status. The flags are set
when the PCI1520 retries a PCI or CardBus master request and the master does not return within 215 PCI clock
cycles. The flags are cleared by writing a 1 to the bit. These bits are expected to be incorporated into the PCI
command, PCI status, and bridge control registers by the PCI SIG. Access this register only through function 0. See
Table 4−10 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
RW
RC
R
RC
R
RC
R
1
1
0
0
0
0
0
0
Name
Type
Default
Retry status
Register:
Offset:
Type:
Default:
Retry status
90h (functions 0, 1)
Read-only, Read/Write, Read/Clear
C0h
Table 4−10. Retry Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
7
PCIRETRY
RW
PCI retry timeout counter enable. Bit 7 is encoded:
0 = PCI retry counter disabled
1 = PCI retry counter enabled (default)
6†
CBRETRY
RW
CardBus retry timeout counter enable. Bit 6 is encoded:
0 = CardBus retry counter disabled
1 = CardBus retry counter enabled (default)
5
TEXP_CBB
RC
CardBus target B retry expired. Write a 1 to clear bit 5.
0 = Inactive (default)
1 = Retry has expired
4
RSVD
R
3†
TEXP_CBA
RC
2
RSVD
R
1
TEXP_PCI
RC
Reserved. Bit 4 returns 0 when read.
CardBus target A retry expired. Write a 1 to clear bit 3.
0 = Inactive (default)
1 = Retry has expired.
Reserved. Bit 2 returns 0 when read.
PCI target retry expired. Write a 1 to clear bit 1.
0 = Inactive (default)
1 = Retry has expired.
0
RSVD
R
Reserved. Bit 0 returns 0 when read.
† This bit is global and is accessed only through function 0.
4−21
4.32 Card Control Register
The card control register is provided for PCI1130 compatibility. RI_OUT is enabled through this register, and the
enable bit is shared between functions 0 and 1. See Table 4−11 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
RW
RW
R
R
RW
RW
RC
0
0
0
0
0
0
0
0
Name
Type
Default
Card control
Register:
Offset:
Type:
Default:
Card control
91h
Read-only, Read/Write, Read/Clear
00h
Table 4−11. Card Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
7†
RIENB
RW
Ring indicate output enable.
0 = Disables any routing of RI_OUT signal (default)
1 = Enables RI_OUT signal for routing to the RI_OUT/PME terminal, when RIMUX is set to 0,
and for routing to MFUNC2 or MFUNC4
6
ZVENABLE
RW
Compatibility ZV mode enable. When set, the corresponding PC Card socket interface ZV terminals enter
a high-impedance state. This bit defaults to 0.
Port select. This bit controls the priority for the ZVSEL0 and ZVSEL1 signaling if bit 6 (ZVENABLE) is set
in both functions.
0 = Socket 0 takes priority, as signaled through ZVSEL0, when both sockets are in ZV mode.
1 = Socket 1 takes priority, as signaled through ZVSEL1, when both sockets are in ZV mode.
5
PORT_SEL
RW
4−3
RSVD
R
2
AUD2MUX
RW
CardBus audio-to-IRQMUX. When set, the CAUDIO CardBus signal is routed to the corresponding
multifunction terminal which may be configured for CAUDPWM. When both socket 0 and 1 functions have
AUD2MUX set, socket 0 takes precedence.
RW
Speaker out enable. When bit 1 is set, SPKR on the PC Card is enabled and is routed to SPKROUT. The
SPKR signal from socket 0 is XORed with the SPKR signal from socket 1 and sent to SPKROUT. The
SPKROUT terminal drives data only when the SPKROUTEN bit of either function is set. This bit is encoded
as:
0 = SPKR to SPKROUT not enabled
1 = SPKR to SPKROUT enabled
RC
Interrupt flag. Bit 0 is the interrupt flag for 16-bit I/O PC Cards and for CardBus cards. Bit 0 is set when a
functional interrupt is signaled from a PC Card interface and is socket dependent (that is, not global). Write
back a 1 to clear this bit.
0 = No PC Card functional interrupt detected (default).
1 = PC Card functional interrupt detected.
1
0
SPKROUTEN
IFG
Reserved. Bits 4 and 3 return 0 when read.
† This bit is global and is accessed only through function 0.
4−22
4.33 Device Control Register
The device control register is provided for PCI1130 compatibility and contains bits that are shared between functions
0 and 1. The interrupt mode select is programmed through this register which is composed of PCI1520 global bits.
The socket-capable force bits are also programmed through this register. See Table 4−12 for a complete description
of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
RW
RW
R
RW
RW
RW
RW
0
1
1
0
0
1
1
0
Name
Type
Default
Device control
Register:
Offset:
Type:
Default:
Device control
92h (functions 0, 1)
Read-only, Read/Write
66h
Table 4−12. Device Control Register Description
BIT
SIGNAL
TYPE
FUNCTION
7
SKTPWR_LOCK
RW
Socket power lock bit. When this bit is set to 1, software cannot power down the PC Card socket while
in D3. This may be necessary to support wake on LAN or RING if the operating system is programmed
to power down a socket when the CardBus controller is placed in the D3 state.
6†
3VCAPABLE
RW
3-V socket capable force
0 = Not 3-V capable
1 = 3-V capable (default)
5
IO16V2
RW
Diagnostic bit. This bit defaults to 1.
4
3†
RSVD
R
Reserved. Bit 4 returns 0 when read.
TEST
RW
TI test. Only a 0 should be written to bit 3.
RW
Interrupt signaling mode. Bits 2 and 1 select the interrupt signaling mode. The interrupt signaling
mode bits are encoded:
00 = Parallel PCI interrupts only
01 = Parallel IRQ and parallel PCI interrupts
10 = IRQ serialized interrupts and parallel PCI interrupt
11 = IRQ and PCI serialized interrupts (default)
2−1
INTMODE
0†
RSVD
RW
Reserved. Bit 0 is reserved for test purposes. Only 0 should be written to this bit.
† This bit is global and is accessed only through function 0.
4−23
4.34 Diagnostic Register
The diagnostic register is provided for internal TI test purposes. It is a read/write register, but only 0s should be written
to it. See Table 4−13 for a complete description of the register contents.
Bit
7
6
5
4
3
2
1
0
RW
R
RW
RW
RW
RW
RW
RW
0
1
1
0
0
0
0
0
Name
Type
Default
Diagnostic
Register:
Offset:
Type:
Default:
Diagnostic
93h (functions 0, 1)
Read/Write
60h
Table 4−13. Diagnostic Register Description
BIT
SIGNAL
TYPE
7†
TRUE_VAL
RW
6
RSVD
R
FUNCTION
This bit defaults to 0. This bit is encoded as:
0 = Reads true values in PCI vendor ID and PCI device ID registers (default)
1 = Reads all 1s in reads from the PCI vendor ID and PCI device ID registers
Reserved. Bit 6 returns 1 when read.
5
CSC
RW
CSC interrupt routing control
0 = CSC interrupts routed to PCI if ExCA 803 bit 4 = 1
1 = CSC interrupts routed to PCI if ExCA 805 bits 7−4 = 0000b (default)
In this case, the setting of ExCA 803 bit 4 is a don’t care.
4†
3†
DIAG4
RW
Diagnostic RETRY_DIS. Delayed transaction disable.
DIAG3
RW
2†
1†
DIAG2
RW
Diagnostic RETRY_EXT. Extends the latency from 16 to 64.
Diagnostic DISCARD_TIM_SEL_CB. Set = 210, reset = 215.
DIAG1
RW
Diagnostic DISCARD_TIM_SEL_PCI. Set = 210, reset = 215.
0
STDZVEN
RW
Standardized zoomed video register model enable.
0 = Enable the standardized zoomed video register model (default).
1 = Disable the standardized zoomed video register model.
† This bit is global and is accessed only through function 0.
4−24
4.35 Capability ID Register
The capability ID register identifies the linked list item as the register for PCI power management. The register returns
01h when read, which is the unique ID assigned by the PCI SIG for the PCI location of the capabilities pointer and
the value.
Bit
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
1
Name
Capability ID
Register:
Offset:
Type:
Default:
Capability ID
A0h
Read-only
01h
4.36 Next-Item Pointer Register
The next-item pointer register indicates the next item in the linked list of the PCI power-management capabilities.
Because the PCI1520 functions include only one capabilities item, this register returns 0s when read.
Bit
7
6
5
4
Type
R
R
R
R
Default
0
0
0
0
Name
3
2
1
0
R
R
R
R
0
0
0
0
Next-item pointer
Register:
Offset:
Type:
Default:
Next-item pointer
A1h
Read-only
00h
4−25
4.37 Power-Management Capabilities Register
This register contains information on the capabilities of the PC Card function related to power management. Both
PCI1520 CardBus bridge functions support D0, D1, D2, and D3 power states. See Table 4−14 for a complete
description of the register contents.
Bit
15
14
13
12
11
10
RW
R
R
R
R
R
R
R
R
1
1
1
1
1
1
1
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
0
0
1
0
0
1
0
Power-management capabilities
Register:
Offset:
Type:
Default:
Power-management capabilities
A2h
Read/Write, Read-only
FE12h
Table 4−14. Power-Management Capabilities Register Description
BIT
SIGNAL
TYPE
FUNCTION
PME support. This 5-bit field indicates the power states from which the PCI1520 device functions may
assert PME. A 0 (zero) for any bit indicates that the function cannot assert the PME signal while in that
power state. These five bits return 11111b when read. Each of these bits is described below:
15
PME_Support
RW
14−11
PME_Support
R
10
D2_Support
R
D2 support. Bit 10 returns a 1 when read, indicating that the CardBus function supports the D2 device
power state.
9
D1_Support
R
D1 support. Bit 9 returns a 1 when read, indicating that the CardBus function supports the D1 device
power state.
8−6
RSVD
R
Reserved. Bits 8−6 return 0s when read.
5
DSI
R
Device-specific initialization. Bit 5 returns 1 when read, indicating that the CardBus controller function
requires special initialization (beyond the standard PCI configuration header) before the generic-class
device driver is able to use it.
4−26
Bit 15 defaults to the value 1 indicating the PME signal can be asserted from the D3cold state. This bit is
R/W because wake-up support from D3cold is contingent on the system providing an auxiliary power source
to the VCC terminals. If the system designer chooses not to provide an auxiliary power source to the VCC
terminals for D3cold wake-up support, then BIOS should write a 0 to this bit.
Bit 14 contains the value 1, indicating that the PME signal can be asserted from D3hot state.
Bit 13 contains the value 1, indicating that the PME signal can be asserted from D2 state.
Bit 12 contains the value 1, indicating that the PME signal can be asserted from D1 state.
Bit 11 contains the value 1, indicating that the PME signal can be asserted from the D0 state.
4
AUX_PWR
R
Auxiliary power source. Bit 4 is meaningful only if bit 15 (PME_Support, D3cold) is set. When bit 4 is set,
it indicates that support for PME in D3cold requires auxiliary power supplied by the system by way of a
proprietary delivery vehicle. When bit 4 is 0, it indicates that the function supplies its own auxiliary power
source.
3
PMECLK
R
PME clock. Bit 3 returns 0 when read, indicating that no host bus clock is required for the PCI1520 to
generate PME.
2−0
VERSION
R
Version. Bits 2−0 return 010b when read, indicating that the power-management registers (PCI offsets
A4h−A7h, see Sections 4.38−4.40) are defined in the PCI Bus Power Management Interface Specification
version 1.1.
4.38 Power-Management Control/Status Register
The power-management control/status register determines and changes the current power state of the PCI1520
CardBus function. The contents of this register are not affected by the internally-generated reset caused by the
transition from D3hot to D0 state. All PCI, ExCA, and CardBus registers are reset as a result of a D3hot to D0 state
transition. TI-specific registers, PCI power-management registers, and the PC Card 16-bit legacy-mode base
address register (PCI offset 44h, see Section 4.28) are not reset. See Table 4−15 for a complete description of the
register contents.
Bit
15
14
13
12
11
10
RC
R
R
R
R
R
R
RW
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
R
R
R
R
R
RW
RW
0
0
0
0
0
0
0
Power-management control/status
Register:
Offset:
Type:
Default:
Power-management control/status
A4h (functions 0, 1)
Read-only, Read/Write, Read/Clear
0000h
Table 4−15. Power-Management Control/Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
15
PMESTAT
RC
PME status. Bit 15 is set when the CardBus function would normally assert PME, independent
of the state of bit 8 (PME_EN). Bit 15 is cleared by a writeback of 1, and this also clears the PME
signal if PME was asserted by this function. Writing a 0 to this bit has no effect.
14−13
DATASCALE
R
Data scale. This 2-bit field returns 0s when read. The CardBus function does not return any
dynamic data.
12−9
DATASEL
R
Data select. This 4-bit field returns 0s when read. The CardBus function does not return any
dynamic data.
8
PME_EN
RW
PME enable. Bit 8 enables the function to assert PME. If this bit is cleared, then assertion of PME
is disabled.
7−2
RSVD
R
1−0
PWR_STATE
RW
Reserved. Bits 7−2 return 0s when read.
Power state. This 2-bit field is used both to determine the current power state of a function and
to set the function into a new power state. This field is encoded as:
00 = D0
01 = D1
10 = D2
11 = D3hot
4−27
4.39 Power-Management Control/Status Register Bridge Support Extensions
The power-management control/status register bridge support extensions support PCI bridge specific functionality.
See Table 4−16 for a complete description of the register contents.
Bit
7
6
Type
R
R
R
R
R
Default
1
1
0
0
0
Name
5
4
3
2
1
0
R
R
R
0
0
0
Power-management control/status register bridge support extensions
Register:
Offset:
Type:
Default:
Power-management control/status register bridge support extensions
A6h (functions 0, 1)
Read-only
C0h
Table 4−16. Power-Management Control/Status Register Bridge Support Extensions Description
BIT
7
SIGNAL
BPCC_EN
TYPE
FUNCTION
R
BPCC_Enable. Bus power/clock control enable. This bit returns 1 when read.
This bit is encoded as:
0 = Bus power/clock control is disabled.
1 = Bus power/clock control is enabled (default).
A 0 indicates that the bus power/clock control policies defined in the PCI Bus Power Management
Interface Specification are disabled. When the bus power/clock control enable mechanism is disabled,
the bridge power-management control/status register power state field (see Section 4.38, bits 1−0)
cannot be used by the system software to control the power or the clock of the bridge secondary bus. A
1 indicates that the bus power/clock control mechanism is enabled.
6
B2_B3
R
B2/B3 support for D3hot. The state of this bit determines the action that is to occur as a direct result of
programming the function to D3hot. This bit is only meaningful if bit 7 (BPCC_EN) is a 1. This bit is encoded
as:
0 = When the bridge is programmed to D3hot, its secondary bus has its power removed (B3).
1 = When the bridge function is programmed to D3hot, its secondary bus PCI clock is
stopped (B2) (default).
5−0
RSVD
R
Reserved. Bits 5−0 return 0s when read.
4.40 Power-Management Data Register
The power-management data register returns 0s when read, because the CardBus functions do not report dynamic
data.
Bit
7
6
5
Type
R
R
R
R
Default
0
0
0
0
Name
3
2
1
0
R
R
R
R
0
0
0
0
Power-management data
Register:
Offset:
Type:
Default:
4−28
4
Power-management data
A7h (functions 0, 1)
Read-only
00h
4.41 General-Purpose Event Status Register
The general-purpose event status register contains status bits that are set when events occur that are controlled by
the general-purpose control register. The bits in this register and the corresponding GPE are cleared by writing a 1
to the corresponding bit location. The status bits in this register do not depend upon the states of corresponding bits
in the general-purpose enable register. Access this register only through function 0. See Table 4−17 for a complete
description of the register contents.
Bit
15
14
13
12
11
10
RC
RC
R
R
RC
R
R
RC
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
R
R
RC
RC
RC
RC
RC
0
0
0
0
0
0
0
General-purpose event status
Register:
Offset:
Type:
Default:
General-purpose event status
A8h (function 0)
Read-only, Read/Clear
0000h
Table 4−17. General-Purpose Event Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
15
ZV0_STS
RC
PC Card socket 0 ZV status. Bit 15 is set on a change in status of bit 6 (ZVENABLE) in the function 0 card
control register (PCI offset 91h, see Section 4.32).
14
ZV1_STS
RC
PC Card socket 1 ZV status. Bit 14 is set on a change in status of bit 6 (ZVENABLE) in the function 1 card
control register (PCI offset 91h, see Section 4.32).
13−12
RSVD
R
11
PWR_STS
RC
10−9
RSVD
R
8
VPP12_STS
RC
Reserved. Bits 13 and 12 return 0s when read.
Power-change status. Bit 11 is set when software has changed the power state of either socket. A change
in either VCC or VPP for either socket causes this bit to be set.
Reserved. Bits 10 and 9 return 0s when read.
12-V VPP request status. Bit 8 is set when software has changed the requested VPP level to or from 12 V
for either of the two PC Card sockets.
7−5
RSVD
R
4
GP4_STS
RC
Reserved. Bits 7−5 return 0s when read.
GPI4 Status. Bit 4 is set on a change in status of the MFUNC5 terminal input level.
3
GP3_STS
RC
GPI3 Status. Bit 3 is set on a change in status of the MFUNC4 terminal input level .
2
GP2_STS
RC
GPI2 Status. Bit 2 is set on a change in status of the MFUNC2 terminal input level.
1
GP1_STS
RC
GPI1 Status. Bit 1 is set on a change in status of the MFUNC1 terminal input level.
0
GP0_STS
RC
GPI0 Status. Bit 0 is set on a change in status of the MFUNC0 terminal input level.
4−29
4.42 General-Purpose Event Enable Register
The general-purpose event enable register contains bits that are set to enable a GPE signal. The GPE signal is driven
until the corresponding status bit is cleared and the event is serviced. The GPE can only be signaled if one of the
multifunction terminals, MFUNC6−MFUNC0, is configured for GPE signaling. Access this register only through
function 0. See Table 4−18 for a complete description of the register contents.
Bit
15
14
13
12
11
10
RW
RW
R
R
RW
R
R
RW
R
0
0
0
0
0
0
0
0
0
Name
Type
Default
9
8
7
6
5
4
3
2
1
0
R
R
RW
RW
RW
RW
RW
0
0
0
0
0
0
0
General-purpose event enable
Register:
Offset:
Type:
Default:
General-purpose event enable
AAh (function 0)
Read-only, Read/Write
0000h
Table 4−18. General-Purpose Event Enable Register Description
BIT
SIGNAL
TYPE
FUNCTION
15
ZV0_EN
RW
PC Card socket 0 ZV enable. When bit 15 is set, a GPE is signaled on a change in status of bit 6
(ZVENABLE) in the function 0 card control register (PCI offset 91h, see Section 4.32).
14
ZV1_EN
RW
PC Card socket 1 ZV enable. When bit 14 is set, a GPE is signaled on a change in status of bit 6
(ZVENABLE) in the function 1 card control register (PCI offset 91h, see Section 4.32).
13−12
RSVD
R
11
PWR_EN
RW
10−9
RSVD
R
8
VPP12_EN
RW
7−5
RSVD
R
4
GP4_EN
RW
GPI4 enable. When bit 4 is set, a GPE is signaled when there has been a change in status of the MFUNC5
terminal input level if configured as GPI4.
3
GP3_EN
RW
GPI3 enable. When bit 3 is set, a GPE is signaled when there has been a change in status of the MFUNC4
terminal input level if configured as GPI3.
2
GP2_EN
RW
GPI2 enable. When bit 2 is set, a GPE is signaled when there has been a change in status of the MFUNC2
terminal input if configured as GPI2.
1
GP1_EN
RW
GPI1 enable. When bit 1 is set, a GPE is signaled when there has been a change in status of the MFUNC1
terminal input if configured as GPI1.
0
GP0_EN
RW
GPI0 enable. When bit 0 is set, a GPE is signaled when there has been a change in status of the MFUNC0
terminal input if configured as GPI0.
4−30
Reserved. Bits 13 and 12 return 0s when read.
Power change enable. When bit 11 is set, a GPE is signaled on when software has changed the power
state of either socket.
Reserved. Bits 10 and 9 return 0s when read.
12-V VPP request enable. When bit 8 is set, a GPE is signaled when software has changed the requested
VPP level to or from 12 V for either card socket.
Reserved. Bits 7−5 return 0s when read.
4.43 General-Purpose Input Register
The general-purpose input register provides the logical value of the data input from the GPI terminals, MFUNC5,
MFUNC4, and MFUNC2−MFUNC0. Access this register only through function 0. See Table 4−19 for a complete
description of the register contents.
Bit
15
14
13
12
11
10
9
Type
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
Name
8
7
6
5
4
3
2
1
0
R
R
R
R
R
R
R
R
0
0
0
X
X
X
X
X
General-purpose input
Register:
Offset:
Type:
Default:
General-purpose input
ACh (function 0)
Read-only
00XXh
Table 4−19. General-Purpose Input Register Description
BIT
SIGNAL
TYPE
15−5
RSVD
R
Reserved. Bits 15−5 return 0s when read.
FUNCTION
4
GPI4_DATA
R
GPI4 data bit. The value read from bit 4 represents the logical value of the data input from the MFUNC5 terminal.
3
GPI3_DATA
R
GPI3 data bit. The value read from bit 3 represents the logical value of the data input from the MFUNC4 terminal.
2
GPI2_DATA
R
GPI2 data bit. The value read from bit 2 represents the logical value of the data input from the MFUNC2 terminal.
1
GPI1_DATA
R
GPI1 data bit. The value read from bit 1 represents the logical value of the data input from the MFUNC1 terminal.
0
GPI0_DATA
R
GPI0 data bit. The value read from bit 0 represents the logical value of the data input from the MFUNC0 terminal.
4−31
4.44 General-Purpose Output Register
The general-purpose output register is used for control of the general-purpose outputs. Access this register only
through function 0. See Table 4−20 for a complete description of the register contents.
Bit
15
14
13
12
11
10
Name
9
8
7
6
5
4
3
2
1
0
General-purpose output
Type
R
R
R
R
R
R
R
R
R
R
R
RW
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Register:
Offset:
Type:
Default:
General-purpose output
AEh (function 0)
Read-only, Read/Write
0000h
Table 4−20. General-Purpose Output Register Description
BIT
SIGNAL
TYPE
15−5
RSVD
R
FUNCTION
4
GPO4_DATA
RW
GPO4 data bit. The value written to bit 4 represents the logical value of the data driven to the MFUNC5
terminal if configured as GPO4. Read transactions return the last data value written.
3
GPO3_DATA
RW
GPIO3 data bit. The value written to bit 3 represents the logical value of the data driven to the MFUNC4
terminal if configured as GPO3. Read transactions return the last data value written.
2
GPO2_DATA
RW
GPO2 data bit. The value written to bit 2 represents the logical value of the data driven to the MFUNC2
terminal if configured as GPO2. Read transactions return the last data value written.
1
GPO1_DATA
RW
GPO1 data bit. The value written to bit 1 represents the logical value of the data driven to the MFUNC1
terminal if configured as GPO1. Read transactions return the last data value written.
0
GPO0_DATA
RW
GPO0 data bit. The value written to bit 0 represents the logical value of the data driven to the MFUNC0
terminal if configured as GPO0. Read transactions return the last data value written.
Reserved. Bits 15−5 return 0s when read.
4.45 Serial-Bus Data Register
The serial-bus data register is for programmable serial-bus byte reads and writes. This register represents the data
when generating cycles on the serial bus interface. To write a byte, this register must be programmed with the data,
the serial bus index register must be programmed with the byte address, the serial-bus slave address must be
programmed with the 7-bit slave address, and the read/write indicator bit must be reset.
On byte reads, the byte address is programmed into the serial-bus index register, the serial bus slave address register
must be programmed with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the
serial bus control and status register (PCI offset B3h, see Section 4.48) must be polled until clear. Then the contents
of this register are valid read data from the serial bus interface. See Table 4−21 for a complete description of the
register contents.
Bit
7
6
5
4
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
0
0
0
0
Serial-bus data
Register:
Offset:
Type:
Default:
Serial-bus data
B0h (function 0)
Read/Write
00h
Table 4−21. Serial-Bus Data Register Description
BIT
7−0
4−32
SIGNAL
SBDATA
TYPE
FUNCTION
RW
Serial-bus data. This bit field represents the data byte in a read or write transaction on the serial interface.
On reads, the REQBUSY bit must be polled to verify that the contents of this register are valid.
4.46 Serial-Bus Index Register
The serial-bus index register is for programmable serial-bus byte reads and writes. This register represents the byte
address when generating cycles on the serial-bus interface. To write a byte, the serial-bus data register must be
programmed with the data, this register must be programmed with the byte address, and the serial-bus slave address
register must be programmed with both the 7-bit slave address and the read/write indicator bit.
On byte reads, the word address is programmed into this register, the serial-bus slave address must be programmed
with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the serial-bus control and
status register (see Section 4.48) must be polled until clear. Then the contents of the serial-bus data register are valid
read data from the serial-bus interface. See Table 4−22 for a complete description of the register contents.
Bit
7
6
5
4
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
0
0
0
0
Serial-bus index
Register:
Offset:
Type:
Default:
Serial-bus index
B1h (function 0)
Read/Write
00h
Table 4−22. Serial-Bus Index Register Description
BIT
SIGNAL
TYPE
FUNCTION
7−0
SBINDEX
RW
Serial-bus index. This bit field represents the byte address in a read or write transaction on the serial interface.
4.47 Serial-Bus Slave Address Register
The serial-bus slave address register is for programmable serial-bus byte read and write transactions. To write a byte,
the serial-bus data register must be programmed with the data, the serial-bus index register must be programmed
with the byte address, and this register must be programmed with both the 7-bit slave address and the read/write
indicator bit.
On byte reads, the byte address is programmed into the serial bus index register, this register must be programmed
with both the 7-bit slave address and the read/write indicator bit, and bit 5 (REQBUSY) in the serial-bus control and
status register (PCI offset B3h, see Section 4.48) must be polled until clear. Then the contents of the serial-bus data
register are valid read data from the serial-bus interface. See Table 4−23 for a complete description of the register
contents.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
Serial-bus slave address
Register:
Offset:
Type:
Default:
Serial-bus slave address
B2h (function 0)
Read/Write
00h
Table 4−23. Serial-Bus Slave Address Register Description
BIT
SIGNAL
TYPE
FUNCTION
7−1
SLAVADDR
RW
Serial-bus slave address. This bit field represents the slave address of a read or write transaction on the
serial interface.
0
RWCMD
RW
Read/write command. Bit 0 indicates the read/write command bit presented to the serial bus on byte read
and write accesses.
0 = A byte write access is requested to the serial bus interface.
1 = A byte read access is requested to the serial bus interface.
4−33
4.48 Serial-Bus Control and Status Register
The serial-bus control and status register communicates serial-bus status information and selects the quick
command protocol. Bit 5 (REQBUSY) in this register must be polled during serial-bus byte reads to indicate when
data is valid in the serial-bus data register. See Table 4−24 for a complete description of the register contents.
Bit
7
6
5
RW
R
R
R
0
0
0
0
Name
Type
Default
4
3
2
1
0
RC
RW
RC
RC
0
0
0
0
Serial-bus control and status
Register:
Offset:
Type:
Default:
Serial-bus control and status
B3h (function 0)
Read-only, Read/Write, Read/Clear
00h
Table 4−24. Serial-Bus Control and Status Register Description
BIT
TYPE
FUNCTION
Protocol select. When bit 7 is set, the send-byte protocol is used on write requests and the receive-byte
protocol is used on read commands. The word-address byte in the serial-bus index register (PCI offset B1h,
see Section 4.46) is not output by the PCI1520 when bit 7 is set.
7
PROT_SEL
RW
6
RSVD
R
Reserved. Bit 6 returns 0 when read.
5
REQBUSY
R
Requested serial-bus access busy. Bit 5 indicates that a requested serial-bus access (byte read or write)
is in progress. A request is made, and bit 5 is set, by writing to the serial-bus slave address register (PCI
offset B2h, see Section 4.47). Bit 5 must be polled on reads from the serial interface. After the byte read
access has been requested, the read data is valid in the serial-bus data register.
4
ROMBUSY
R
Serial EEPROM busy status. Bit 4 indicates the status of the PCI1520 serial EEPROM circuitry. Bit 4 is set
during the loading of the subsystem ID and other default values from the serial-bus EEPROM.
0 = Serial EEPROM circuitry is not busy
1 = Serial EEPROM circuitry is busy
3
SBDETECT
RC
Serial-bus detect. When bit 3 is set, it indicates that the serial-bus interface is detected. A pulldown resistor
must be implemented on the LATCH terminal for bit 3 to be set. If bit 3 is reset, then the MFUNC4 and
MFUNC1 terminals can be used for alternate functions such as general-purpose inputs and outputs.
0 = Serial-bus interface not detected
1 = Serial-bus interface detected
2
SBTEST
RW
Serial-bus test. When bit 2 is set, the serial-bus clock frequency is increased for test purposes.
0 = Serial-bus clock at normal operating frequency, 100 kHz (default)
1 = Serial-bus clock frequency increased for test purposes
RC
Requested serial-bus access error. Bit 1 indicates when a data error occurs on the serial interface during
a requested cycle, and can be set due to a missing acknowledge. Bit 1 is cleared by a writeback of 1.
0 = No error detected during user-requested byte read or write cycle
1 = Data error detected during user-requested byte read or write cycle
RC
EEPROM data-error status. Bit 0 indicates when a data error occurs on the serial interface during the
auto-load from the serial-bus EEPROM, and can be set due to a missing acknowledge. Bit 0 is also set on
invalid EEPROM data formats. See Section 3.6.1, Serial Bus Interface Implementation, for details on
EEPROM data format. Bit 0 is cleared by a writeback of 1.
0 = No error detected during auto-load from serial-bus EEPROM
1 = Data error detected during auto-load from serial-bus EEPROM
1
0
4−34
SIGNAL
REQ_ERR
ROM_ERR
5 ExCA Compatibility Registers (Functions 0 and 1)
The ExCA registers implemented in the PCI1520 are register-compatible with the Intel 82365SL−DF PCMCIA
controller. ExCA registers are identified by an offset value that is compatible with the legacy I/O index/data scheme
used on the Intel 82365 ISA controller. The ExCA registers are accessed through this scheme by writing the register
offset value into the index register (I/O base) and reading or writing the data register (I/O base + 1). The I/O base
address used in the index/data scheme is programmed in the PC Card 16-bit I/F legacy-mode base address register
(PCI offset 44h, see Section 4.28), which is shared by both card sockets. The offsets from this base address run
contiguously from 00h to 3Fh for socket A, and from 40h to 7Fh for socket B. See Figure 5−1 for an ExCA I/O mapping
illustration.
PCI1520 Configuration Registers
Host I/O Space
Offset
Offset
CardBus Socket/ExCA Base Address
10h
Index
PC Card A
ExCA
Registers
Data
16-Bit Legacy-Mode Base Address
44h
PC Card B
ExCA
Registers
00h
3Fh
40h
7Fh
NOTE: The 16-bit legacy mode base address register is shared by functions 0 and 1 as indicated by the shading.
Figure 5−1. ExCA Register Access Through I/O
The TI PCI1520 also provides a memory-mapped alias of the ExCA registers by directly mapping them into PCI
memory space. They are located through the CardBus socket/ExCA base-address register (PCI offset 10h, see
Section 4.12) at memory offset 800h. Each socket has a separate base address programmable by function. See
Figure 5−2 for an ExCA memory mapping illustration. Note that memory offsets are 800h−844h for both functions
0 and 1. This illustration also identifies the CardBus socket register mapping, which is mapped into the same 4-K
window at memory offset 00h.
5−1
PCI1520 Configuration Registers
Offset
Host
Memory Space
Offset
Host
Memory Space
Offset
00h
CardBus Socket/ExCA Base Address
10h
CardBus
Socket A
Registers
00h
20h
800h
16-Bit Legacy-Mode Base Address
44h
CardBus
Socket B
Registers
20h
ExCA
Registers
Card A
800h
844h
ExCA
Registers
Card B
844h
NOTE: The CardBus socket/ExCA base address mode register is separate for functions 0 and 1.
Figure 5−2. ExCA Register Access Through Memory
The interrupt registers in the ExCA register set, as defined by the 82365SL−DL specification, control such card
functions as reset, type, interrupt routing, and interrupt enables. Special attention must be paid to the interrupt routing
registers and the host interrupt signaling method selected for the PCI1520 to ensure that all possible PCI1520
interrupts can potentially be routed to the programmable interrupt controller. The ExCA registers that are critical to
the interrupt signaling are the ExCA interrupt and general control register (ExCA offset 03h/43h/803h, see
Section 5.4) and the ExCA card status-change interrupt configuration register (05h/45h/805h, see Section 5.6).
Access to I/O mapped 16-bit PC cards is available to the host system via two ExCA I/O windows. These are regions
of host I/O address space into which the card I/O space is mapped. These windows are defined by start, end, and
offset addresses programmed in the ExCA registers described in this section. I/O windows have byte granularity.
Access to memory mapped 16-bit PC Cards is available to the host system via five ExCA memory windows. These
are regions of host memory space into which the card memory space is mapped. These windows are defined by start,
end, and offset addresses programmed in the ExCA registers described in this section. Table 5−1 identifies each
ExCA register and its respective ExCA offset. Memory windows have 4-Kbyte granularity.
5−2
Table 5−1. ExCA Registers and Offsets
ExCA OFFSET (HEX)
PCI MEMORY ADDRESS
OFFSET (HEX)
CARD A
CARD B
Identification and revision
800
00
40
Interface status
801
01
41
Power control
802
02
42
Interrupt and general control
803
03
43
Card status change
804
04
44
Card status-change interrupt configuration
805
05
45
Address window enable
806
06
46
I / O window control
807
07
47
I / O window 0 start-address low byte
808
08
48
I / O window 0 start-address high byte
809
09
49
I / O window 0 end-address low byte
80A
0A
4A
I / O window 0 end-address high byte
80B
0B
4B
I / O window 1 start-address low byte
80C
0C
4C
I / O window 1 start-address high byte
80D
0D
4D
I / O window 1 end-address low byte
80E
0E
4E
I / O window 1 end-address high byte
80F
0F
4F
Memory window 0 start-address low byte
810
10
50
EXCA REGISTER NAME
Memory window 0 start-address high byte
811
11
51
Memory window 0 end-address low byte
812
12
52
Memory window 0 end-address high byte
813
13
53
Memory window 0 offset-address low byte
814
14
54
Memory window 0 offset-address high byte
815
15
55
Card detect and general control
816
16
56
Reserved
817
17
57
Memory window 1 start-address low byte
818
18
58
Memory window 1 start-address high byte
819
19
59
Memory window 1 end-address low byte
81A
1A
5A
Memory window 1 end-address high byte
81B
1B
5B
Memory window 1 offset-address low byte
81C
1C
5C
Memory window 1 offset-address high byte
81D
1D
5D
Global control
81E
1E
5E
Reserved
81F
1F
5F
Memory window 2 start-address low byte
820
20
60
Memory window 2 start-address high byte
821
21
61
Memory window 2 end-address low byte
822
22
62
Memory window 2 end-address high byte
823
23
63
Memory window 2 offset-address low byte
824
24
64
Memory window 2 offset-address high byte
825
25
65
Reserved
826
26
66
Reserved
827
27
67
Memory window 3 start-address low byte
828
28
68
Memory window 3 start-address high byte
829
29
69
Memory window 3 end-address low byte
82A
2A
6A
5−3
Table 5−1. ExCA Registers and Offsets (Continued)
ExCA OFFSET (HEX)
PCI MEMORY ADDRESS
OFFSET (HEX)
CARD A
CARD B
Memory window 3 end-address high byte
82B
2B
6B
Memory window 3 offset-address low byte
82C
2C
6C
Memory window 3 offset-address high byte
82D
2D
6D
Reserved
82E
2E
6E
Reserved
82F
2F
6F
Memory window 4 start-address low byte
830
30
70
Memory window 4 start-address high byte
831
31
71
Memory window 4 end-address low byte
832
32
72
Memory window 4 end-address high byte
833
33
73
Memory window 4 offset-address low byte
834
34
74
Memory window 4 offset-address high byte
835
35
75
I/O window 0 offset-address low byte
836
36
76
I/O window 0 offset-address high byte
837
37
77
I/O window 1 offset-address low byte
838
38
78
EXCA REGISTER NAME
I/O window 1 offset-address high byte
839
39
79
Reserved
83A
3A
7A
Reserved
83B
3B
7B
Reserved
83C
3C
7C
Reserved
83D
3D
7D
Reserved
83E
3E
7E
Reserved
83F
3F
7F
Memory window page 0
840
−
−
Memory window page 1
841
−
−
Memory window page 2
842
−
−
Memory window page 3
843
−
−
Memory window page 4
844
−
−
A bit description table, typically included when a register contains bits of more than one type or purpose, indicates
bit field names, which appear in the signal column; a detailed field description, which appears in the function column;
and field access tags, which appear in the type column of the bit description table. Table 4−2 describes the field
access tags.
5−4
5.1 ExCA Identification and Revision Register
The ExCA identification and revision register provides host software with information on 16-bit PC Card support and
Intel 82365SL-DF compatibility. This register is read-only or read/write, depending on the setting of bit 5
(SUBSYSRW) in the system control register (PCI offset 80h, see Section 4.29). See Table 5−2 for a complete
description of the register contents.
Bit
7
6
5
Type
R
R
RW
RW
Default
1
0
0
0
Name
4
3
2
1
0
RW
RW
RW
RW
0
1
0
0
ExCA identification and revision
Register:
Offset:
Type:
Default:
ExCA identification and revision
CardBus socket address + 800h; Card A ExCA offset 00h
Card B ExCA offset 40h
Read-only, Read/Write
84h
Table 5−2. ExCA Identification and Revision Register Description
BIT
SIGNAL
TYPE
FUNCTION
Interface type. These bits, which are hardwired as 10b, identify the 16-bit PC Card support provided by the
PCI1520. The PCI1520 supports both I/O and memory 16-bit PC cards.
7−6
IFTYPE
R
5−4
RSVD
RW
Reserved. Bits 5 and 4 can be used for Intel 82365SL-DF emulation.
3−0
365REV
RW
Intel 82365SL-DF revision. This field stores the Intel 82365SL-DF revision supported by the PCI1520. Host
software can read this field to determine compatibility to the Intel 82365SL-DF register set. Writing 0010b to
this field puts the controller in 82365SL mode.
5−5
5.2 ExCA Interface Status Register
The ExCA interface status register provides information on the current status of the PC Card interface. An X in the
default bit value indicates that the value of the bit after reset depends on the state of the PC Card interface. See
Table 5−3 for a complete description of the register contents.
Bit
7
6
5
Type
R
R
R
R
Default
0
0
X
X
Name
4
3
2
1
0
R
R
R
R
X
X
X
X
ExCA interface status
Register:
Offset:
Type:
Default:
ExCA interface status
CardBus socket address + 801h; Card A ExCA offset 01h
Card B ExCA offset 41h
Read-only
00XX XXXXb
Table 5−3. ExCA Interface Status Register Description
BIT
SIGNAL
TYPE
7
RSVD
R
Reserved. Bit 7 returns 0 when read.
FUNCTION
6
CARDPWR
R
Card Power. Bit 6 indicates the current power status of the PC Card socket. This bit reflects how the ExCA
power control register (ExCA offset 02h/42h/802h, see Section 5.3) is programmed. Bit 6 is encoded as:
0 = VCC and VPP to the socket turned off (default)
1 = VCC and VPP to the socket turned on
5
READY
R
Ready. Bit 5 indicates the current status of the READY signal at the PC Card interface.
0 = PC Card not ready for data transfer
1 = PC Card ready for data transfer
4
CARDWP
R
Card write protect (WP). Bit 4 indicates the current status of WP at the PC Card interface. This signal reports
to the PCI1520 whether or not the memory card is write protected. Furthermore, write protection for an entire
PCI1520 16-bit memory window is available by setting the appropriate bit in the memory window
offset-address high-byte register.
0 = WP is 0. PC Card is read/write.
1 = WP is 1. PC Card is read-only.
3
CDETECT2
R
Card detect 2. Bit 3 indicates the status of CD2 at the PC Card interface. Software may use this and bit 2
(CDETECT1) to determine if a PC Card is fully seated in the socket.
0 = CD2 is 1. No PC Card is inserted.
1 = CD2 is 0. PC Card is at least partially inserted.
R
Card detect 1. Bit 2 indicates the status of CD1 at the PC Card interface. Software may use this and bit 3
(CDETECT2) to determine if a PC Card is fully seated in the socket.
0 = CD1 is 1. No PC Card is inserted.
1 = CD1 is 0. PC Card is at least partially inserted.
2
1−0
CDETECT1
BVDSTAT
R
Battery voltage detect. When a 16-bit memory card is inserted, the field indicates the status of the battery
voltage detect signals (BVD1, BVD2) at the PC Card interface, where bit 1 reflects the BVD2 status and bit 0
reflects BVD1.
00 = Battery dead
01 = Battery dead
10 = Battery low; warning
11 = Battery good
When a 16-bit I/O card is inserted, this field indicates the status of SPKR (bit 1) and STSCHG (bit 0) at the
PC Card interface. In this case, the two bits in this field directly reflect the current state of these card outputs.
5−6
5.3 ExCA Power Control Register
The ExCA power control register provides PC Card power control. Bit 7 (COE) of this register controls the 16-bit output
enables on the socket interface, and can be used for power management in 16-bit PC Card applications. See
Table 5−4 and Table 5−5 for a complete description of the register contents.
Bit
7
6
5
Name
Type
Default
4
3
2
1
0
ExCA power control
RW
R
R
RW
RW
R
RW
RW
0
0
0
0
0
0
0
0
Register:
Offset:
ExCA power control
CardBus socket address + 802h; Card A ExCA offset 02h
Card B ExCA offset 42h
Read-only, Read/Write
00h
Type:
Default:
Table 5−4. ExCA Power Control Register Description—82365SL Support
BIT
SIGNAL
TYPE
FUNCTION
Card output enable. Bit 7 controls the state of all of the 16-bit outputs on the PCI1520. This bit is
encoded as:
0 = 16-bit PC Card outputs disabled (default)
1 = 16-bit PC Card outputs enabled
7
COE
RW
6
RSVD
R
5
AUTOPWRSWEN
RW
Auto power switch enable.
0 = Automatic socket power switching based on card detects is disabled.
1 = Automatic socket power switching based on card detects is enabled.
PC Card power enable.
0 = VCC = No connection
1 = VCC is enabled and controlled by bit 2 (EXCAPOWER) of the system control register
(PCI offset 80h, see Section 4.29).
4
CAPWREN
RW
3−2
RSVD
R
RW
Reserved. Bit 6 returns 0 when read.
Reserved. Bits 3 and 2 return 0s when read.
PC Card VPP power control. Bits 1 and 0 are used to request changes to card VPP. The PCI1520 ignores
this field unless VCC to the socket is enabled. This field is encoded as:
00 = No connection (default)
01 = VCC
10 = 12 V
11 = Reserved
1−0
EXCAVPP
BIT
SIGNAL
TYPE
FUNCTION
7
COE
RW
Card output enable. Bit 7 controls the state of all of the 16-bit outputs on the PCI1520. This bit is encoded as:
0 = 16-bit PC Card outputs disabled (default)
1 = 16-bit PC Card outputs enabled
6−5
RSVD
R
Table 5−5. ExCA Power Control Register Description—82365SL-DF Support
4−3
EXCAVCC
RW
2
RSVD
R
1−0
EXCAVPP
RW
Reserved. Bits 6 and 5 return 0s when read.
VCC. Bits 4 and 3 are used to request changes to card VCC. This field is encoded as:
00 = 0 V (default)
01 = 0 V reserved
10 = 5 V
11 = 3.3 V
Reserved. Bit 2 returns 0 when read.
VPP. Bits 1 and 0 are used to request changes to card VPP. The PCI1520 ignores this field unless VCC to
the socket is enabled. This field is encoded as:
00 = No connection (default)
01 = VCC
10 = 12 V
11 = Reserved
5−7
5.4 ExCA Interrupt and General Control Register
The ExCA interrupt and general control register controls interrupt routing for I/O interrupts, as well as other critical
16-bit PC Card functions. See Table 5−6 for a complete description of the register contents.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA interrupt and general control
Register:
Offset:
Type:
Default:
ExCA interrupt and general control
CardBus socket address + 803h; Card A ExCA offset 03h
Card B ExCA offset 43h
Read/Write
00h
Table 5−6. ExCA Interrupt and General Control Register Description
BIT
TYPE
FUNCTION
7
RINGEN
RW
Card ring indicate enable. Bit 7 enables the ring indicate function of BVD1/RI. This bit is encoded as:
0 = Ring indicate disabled (default)
1 = Ring indicate enabled
6
RESET
RW
Card reset. Bit 6 controls the 16-bit PC Card RESET, and allows host software to force a card reset. Bit 6
affects 16-bit cards only. This bit is encoded as:
0 = RESET signal asserted (default)
1 = RESET signal deasserted
5
CARDTYPE
RW
Card type. Bit 5 indicates the PC card type. This bit is encoded as:
0 = Memory PC Card installed (default)
1 = I/O PC Card installed
RW
PCI interrupt CSC routing enable bit. When bit 4 is set (high), the card status change interrupts are routed
to PCI interrupts. When low, the card status change interrupts are routed using bits 7−4 (CSCSELECT field)
in the ExCA card status-change interrupt configuration register (ExCA offset 05h/45h/805h, see
Section 5.6). This bit is encoded as:
0 = CSC interrupts are routed by ExCA registers (default).
1 = CSC interrupts are routed to PCI interrupts.
RW
Card interrupt select for I/O PC Card functional interrupts. Bits 3−0 select the interrupt routing for I/O
PC Card functional interrupts. This field is encoded as:
0000 = No interrupt routing (default). CSC interrupts are routed to PCI interrupts. This bit setting is
ORed with bit 4 (CSCROUTE) for backward compatibility.
0001 = IRQ1 enabled
0010 = SMI enabled
0011 = IRQ3 enabled
0100 = IRQ4 enabled
0101 = IRQ5 enabled
0100 = IRQ6 enabled
0111 = IRQ7 enabled
1000 = IRQ8 enabled
1001 = IRQ9 enabled
1010 = IRQ10 enabled
1011 = IRQ11 enabled
1100 = IRQ12 enabled
1101 = IRQ13 enabled
1110 = IRQ14 enabled
1111 = IRQ15 enabled
4
3−0
5−8
SIGNAL
CSCROUTE
INTSELECT
5.5 ExCA Card Status-Change Register
The ExCA card status-change register controls interrupt routing for I/O interrupts as well as other critical 16-bit PC
Card functions. The register enables these interrupt sources to generate an interrupt to the host. When the interrupt
source is disabled, the corresponding bit in this register always reads 0. When an interrupt source is enabled, the
corresponding bit in this register is set to indicate that the interrupt source is active. After generating the interrupt to
the host, the interrupt service routine must read this register to determine the source of the interrupt. The interrupt
service routine is responsible for resetting the bits in this register as well. Resetting a bit is accomplished by one of
two methods: a read of this register or an explicit write back of 1 to the status bit. The choice of these two methods
is based on bit 2 (interrupt flag clear mode select) in the ExCA global control register (ExCA offset 1E/5E/81E, see
Section 5.20). See Table 5−7 for a complete description of the register contents.
Bit
7
6
5
Type
R
R
R
R
Default
0
0
0
0
Name
4
3
2
1
0
R
R
R
R
0
0
0
0
ExCA card status-change
Register:
Offset:
Type:
Default:
ExCA card status-change
CardBus socket address + 804h; Card A ExCA offset 04h
Card B ExCA offset 44h
Read-only
00h
Table 5−7. ExCA Card Status-Change Register Description
BIT
SIGNAL
TYPE
7−4
RSVD
R
Reserved. Bits 7−4 return 0s when read.
R
Card detect change. Bit 3 indicates whether a change on CD1 or CD2 occurred at the PC Card
interface. This bit is encoded as:
0 = No change detected on either CD1 or CD2
1 = Change detected on either CD1 or CD2
3
2
CDCHANGE
READYCHANGE
R
FUNCTION
Ready change. When a 16-bit memory is installed in the socket, bit 2 includes whether the source of
a PCI1520 interrupt was due to a change on READY at the PC Card interface, indicating that the
PC Card is now ready to accept new data. This bit is encoded as:
0 = No low-to-high transition detected on READY (default)
1 = Detected low-to-high transition on READY
When a 16-bit I/O card is installed, bit 2 is always 0.
1
BATWARN
R
Battery warning change. When a 16-bit memory card is installed in the socket, bit 1 indicates whether
the source of a PCI1520 interrupt was due to a battery-low warning condition. This bit is encoded as:
0 = No battery warning condition (default)
1 = Detected battery warning condition
When a 16-bit I/O card is installed, bit 1 is always 0.
0
BATDEAD
R
Battery dead or status change. When a 16-bit memory card is installed in the socket, bit 0 indicates
whether the source of a PCI1520 interrupt was due to a battery dead condition. This bit is encoded as:
0 = STSCHG deasserted (default)
1 = STSCHG asserted
Ring indicate. When the PCI1520 is configured for ring indicate operation, bit 0 indicates the status of
RI.
5−9
5.6 ExCA Card Status-Change Interrupt Configuration Register
The ExCA card status-change interrupt configuration register controls interrupt routing for card status-change
interrupts, as well as masking CSC interrupt sources. See Table 5−8 for a complete description of the register
contents.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA status-change-interrupt configuration
Register:
Offset:
Type:
Default:
ExCA card status-change interrupt configuration
CardBus socket address + 805h; Card A ExCA offset 05h
Card B ExCA offset 45h
Read/Write
00h
Table 5−8. ExCA Card Status-Change Interrupt Configuration Register Description
BIT
SIGNAL
TYPE
FUNCTION
Interrupt select for card status change. Bits 7−4 select the interrupt routing for card status-change
interrupts.
0000 = CSC interrupts routed to PCI interrupts if bit 5 (CSC) of the diagnostic register (PCI offset 93h, see
Section 4.34) is set to 1. In this case bit 4 (CSCROUTE) of the ExCA interrupt and general control register
(ExCA offset 03h/43h/803h, see Section 5.4) is a don’t care. This is the default setting.
0000 = No ISA interrupt routing if bit 5 (CSC) of the diagnostic register is set to 0 (see Section 4.34). In
this case, CSC interrupts are routed to PCI interrupts by setting bit 4 (CSCROUTE) of the ExCA interrupt
and general control register (ExCA offset 03h/43h/803h, see Section 5.4) to 1.
7−4
3
2
1
0
5−10
CSCSELECT
CDEN
READYEN
BATWARNEN
BATDEADEN
RW
This field is encoded as:
0000 = No interrupt routing (default)
0001 = IRQ1 enabled
0010 = SMI enabled
0011 = IRQ3 enabled
0100 = IRQ4 enabled
0101 = IRQ5 enabled
0110 = IRQ6 enabled
0111 = IRQ7 enabled
1000 = IRQ8 enabled
1001 = IRQ9 enabled
1010 = IRQ10 enabled
1011 = IRQ11 enabled
1100 = IRQ12 enabled
1101 = IRQ13 enabled
1110 = IRQ14 enabled
1111 = IRQ15 enabled
RW
Card detect enable. Bit 3 enables interrupts on CD1 or CD2 changes. This bit is encoded as:
0 = Disables interrupts on CD1 or CD2 line changes (default)
1 = Enables interrupts on CD1 or CD2 line changes
RW
Ready enable. Bit 2 enables/disables a low-to-high transition on PC Card READY to generate a host
interrupt. This interrupt source is considered a card status change. This bit is encoded as:
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
RW
Battery warning enable. Bit 1 enables/disables a battery warning condition to generate a CSC interrupt.
This bit is encoded as:
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
RW
Battery dead enable. Bit 0 enables/disables a battery dead condition on a memory PC Card or assertion
of the STSCHG I/O PC Card signal to generate a CSC interrupt.
0 = Disables host interrupt generation (default)
1 = Enables host interrupt generation
5.7 ExCA Address Window Enable Register
The ExCA address window enable register enables/disables the memory and I/O windows to the 16-bit PC Card. By
default, all windows to the card are disabled. The PCI1520 does not acknowledge PCI memory or I/O cycles to the
card if the corresponding enable bit in this register is 0, regardless of the programming of the memory or I/O window
start/end/offset address registers. See Table 5−9 for a complete description of the register contents.
Bit
7
6
5
RW
RW
R
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA address window enable
Register:
Offset:
Type:
Default:
ExCA address window enable
CardBus socket address + 806h; Card A ExCA offset 06h
Card B ExCA offset 46h
Read-only, Read/Write
00h
Table 5−9. ExCA Address Window Enable Register Description
BIT
SIGNAL
TYPE
FUNCTION
7
IOWIN1EN
RW
I/O window 1 enable. Bit 7 enables/disables I/O window 1 for the PC Card. This bit is encoded as:
0 = I/O window 1 disabled (default)
1 = I/O window 1 enabled
6
IOWIN0EN
RW
I/O window 0 enable. Bit 6 enables/disables I/O window 0 for the PC Card. This bit is encoded as:
0 = I/O window 0 disabled (default)
1 = I/O window 0 enabled
5
RSVD
R
4
3
2
MEMWIN4EN
MEMWIN3EN
MEMWIN2EN
Reserved. Bit 5 returns 0 when read.
RW
Memory window 4 enable. Bit 4 enables/disables memory window 4 for the PC Card. This bit is
encoded as:
0 = Memory window 4 disabled (default)
1 = Memory window 4 enabled
RW
Memory window 3 enable. Bit 3 enables/disables memory window 3 for the PC Card. This bit is
encoded as:
0 = Memory window 3 disabled (default)
1 = Memory window 3 enabled
RW
Memory window 2 enable. Bit 2 enables/disables memory window 2 for the PC Card. This bit is
encoded as:
0 = Memory window 2 disabled (default)
1 = Memory window 2 enabled
1
MEMWIN1EN
RW
Memory window 1 enable. Bit 1 enables/disables memory window 1 for the PC Card. This bit is
encoded as:
0 = Memory window 1 disabled (default)
1 = Memory window 1 enabled
0
MEMWIN0EN
RW
Memory window 0 enable. Bit 0 enables/disables memory window 0 for the PC Card. This bit is
encoded as:
0 = Memory window 0 disabled (default)
1 = Memory window 0 enabled
5−11
5.8 ExCA I/O Window Control Register
The ExCA I/O window control register contains parameters related to I/O window sizing and cycle timing. See
Table 5−10 for a complete description of the register contents.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA I/O window control
Register:
Offset:
Type:
Default:
ExCA I/O window control
CardBus socket address + 807h; Card A ExCA offset 07h
Card B ExCA offset 47h
Read/Write
00h
Table 5−10. ExCA I/O Window Control Register Description
BIT
7
6
5
4
3
2
1
0
5−12
SIGNAL
WAITSTATE1
ZEROWS1
IOIS16W1
DATASIZE1
WAITSTATE0
ZEROWS0
IOIS16W0
DATASIZE0
TYPE
FUNCTION
RW
I/O window 1 wait state. Bit 7 controls the I/O window 1 wait state for 16-bit I/O accesses. Bit 7 has no effect
on 8-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel 82365SL-DF. This
bit is encoded as:
0 = 16-bit cycles have standard length (default).
1 = 16-bit cycles are extended by one equivalent ISA wait state.
RW
I/O window 1 zero wait state. Bit 6 controls the I/O window 1 wait state for 8-bit I/O accesses. Bit 6 has
no effect on 16-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel
82365SL-DF. This bit is encoded as:
0 = 8-bit cycles have standard length (default).
1 = 8-bit cycles are reduced to equivalent of three ISA cycles.
RW
I/O window 1 IOIS16 source. Bit 5 controls the I/O window 1 automatic data sizing feature that uses IOIS16
from the PC Card to determine the data width of the I/O data transfer. This bit is encoded as:
0 = Window data width determined by DATASIZE1, bit 4 (default).
1 = Window data width determined by IOIS16.
RW
I/O window 1 data size. Bit 4 controls the I/O window 1 data size. Bit 4 is ignored if bit 5 (IOSIS16W1) is
set. This bit is encoded as:
0 = Window data width is 8 bits (default).
1 = Window data width is 16 bits.
RW
I/O window 0 wait state. Bit 3 controls the I/O window 0 wait state for 16-bit I/O accesses. Bit 3 has no effect
on 8-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel 82365SL-DF. This
bit is encoded as:
0 = 16-bit cycles have standard length (default).
1 = 16-bit cycles are extended by one equivalent ISA wait state.
RW
I/O window 0 zero wait state. Bit 2 controls the I/O window 0 wait state for 8-bit I/O accesses. Bit 2 has
no effect on 16-bit accesses. This wait-state timing emulates the ISA wait state used by the Intel
82365SL-DF. This bit is encoded as:
0 = 8-bit cycles have standard length (default).
1 = 8-bit cycles are reduced to equivalent of three ISA cycles.
RW
I/O window 0 IOIS16 source. Bit 1 controls the I/O window 0 automatic data sizing feature that uses IOIS16
from the PC Card to determine the data width of the I/O data transfer. This bit is encoded as:
0 = Window data width is determined by DATASIZE0, bit 0 (default).
1 = Window data width is determined by IOIS16.
RW
I/O window 0 data size. Bit 0 controls the I/O window 0 data size. Bit 0 is ignored if bit 1 (IOSIS16W0) is
set. This bit is encoded as:
0 = Window data width is 8 bits (default).
1 = Window data width is 16 bits.
5.9 ExCA I/O Windows 0 and 1 Start-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window start address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the lower 8 bits of the start address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 start-address low-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 start-address low-byte
CardBus socket address + 808h; Card A ExCA offset 08h
Card B ExCA offset 48h
ExCA I/O window 1 start-address low-byte
CardBus socket address + 80Ch; Card A ExCA offset 0Ch
Card B ExCA offset 4Ch
Read/Write
00h
5.10 ExCA I/O Windows 0 and 1 Start-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window start address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the upper 8 bits of the start address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 start-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 start-address high-byte
CardBus socket address + 809h; Card A ExCA offset 09h
Card B ExCA offset 49h
ExCA I/O window 1 start-address high-byte
CardBus socket address + 80Dh; Card A ExCA offset 0Dh
Card B ExCA offset 4Dh
Read/write
00h
5−13
5.11 ExCA I/O Windows 0 and 1 End-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window end address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the lower 8 bits of the end address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 end-address low-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 end-address low-byte
CardBus socket address + 80Ah; Card A ExCA offset 0Ah
Card B ExCA offset 4Ah
ExCA I/O window 1 end-address low-byte
CardBus socket address + 80Eh; Card A ExCA offset 0Eh
Card B ExCA offset 4Eh
Read/Write
00h
5.12 ExCA I/O Windows 0 and 1 End-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window end address for I/O windows 0 and 1. The 8 bits of these
registers correspond to the upper 8 bits of the end address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 end-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
5−14
4
ExCA I/O window 0 end-address high-byte
CardBus socket address + 80Bh; Card A ExCA offset 0Bh
Card B ExCA offset 4Bh
ExCA I/O window 1 end-address high-byte
CardBus socket address + 80Fh; Card A ExCA offset 0Fh
Card B ExCA offset 4Fh
Read/write
00h
5.13 ExCA Memory Windows 0−4 Start-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window start address for memory windows 0, 1, 2, 3, and
4. The 8 bits of these registers correspond to bits A19−A12 of the start address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 start-address low-byte
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 start-address low-byte
CardBus socket address + 810h; Card A ExCA offset 10h
Card B ExCA offset 50h
ExCA memory window 1 start-address low-byte
CardBus socket address + 818h; Card A ExCA offset 18h
Card B ExCA offset 58h
ExCA memory window 2 start-address low-byte
CardBus socket address + 820h; Card A ExCA offset 20h
Card B ExCA offset 60h
ExCA memory window 3 start-address low-byte
CardBus socket address + 828h; Card A ExCA offset 28h
Card B ExCA offset 68h
ExCA memory window 4 start-address low-byte
CardBus socket address + 830h; Card A ExCA offset 30h
Card B ExCA offset 70h
Read/Write
00h
5−15
5.14 ExCA Memory Windows 0−4 Start-Address High-Byte Registers
These registers contain the high nibble of the 16-bit memory window start address for memory windows 0, 1, 2, 3,
and 4. The lower 4 bits of these registers correspond to bits A23−A20 of the start address. In addition, the memory
window data width and wait states are set in this register. See Table 5−11 for a complete description of the register
contents.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 start-address high-byte
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 start-address high-byte
CardBus socket address + 811h; Card A ExCA offset 11h
Card B ExCA offset 51h
ExCA memory window 1 start-address high-byte
CardBus socket address + 819h; Card A ExCA offset 19h
Card B ExCA offset 59h
ExCA memory window 2 start-address high-byte
CardBus socket address + 821h; Card A ExCA offset 21h
Card B ExCA offset 61h
ExCA memory window 3 start-address high-byte
CardBus socket address + 829h; Card A ExCA offset 29h
Card B ExCA offset 69h
ExCA memory window 4 start-address high-byte
CardBus socket address + 831h; Card A ExCA offset 31h
Card B ExCA offset 71h
Read/Write
00h
Table 5−11. ExCA Memory Windows 0−4 Start-Address High-Byte Registers Description
BIT
7
5−16
SIGNAL
DATASIZE
TYPE
FUNCTION
RW
Data size. Bit 7 controls the memory window data width. This bit is encoded as:
0 = Window data width is 8 bits (default).
1 = Window data width is 16 bits.
6
ZEROWAIT
RW
Zero wait state. Bit 6 controls the memory window wait state for 8- and 16-bit accesses. This wait-state timing
emulates the ISA wait state used by the Intel 82365SL-DF. This bit is encoded as:
0 = 8- and 16-bit cycles have standard length (default).
1 = 8-bit cycles are reduced to equivalent of three ISA cycles.
16-bit cycles are reduced to equivalent of two ISA cycles.
5−4
SCRATCH
RW
Scratch pad bits. Bits 5 and 4 have no effect on memory window operation.
3−0
STAHN
RW
Start-address high nibble. Bits 3−0 represent the upper address bits A23−A20 of the memory window
start address.
5.15 ExCA Memory Windows 0−4 End-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window end address for memory windows 0, 1, 2, 3, and
4. The 8 bits of these registers correspond to bits A19−A12 of the end address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 end-address low-byte
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 end-address low-byte
CardBus socket address + 812h; Card A ExCA offset 12h
Card B ExCA offset 52h
ExCA memory window 1 end-address low-byte
CardBus socket address + 81Ah; Card A ExCA offset 1Ah
Card B ExCA offset 5Ah
ExCA memory window 2 end-address low-byte
CardBus socket address + 822h; Card A ExCA offset 22h
Card B ExCA offset 62h
ExCA memory window 3 end-address low-byte
CardBus socket address + 82Ah; Card A ExCA offset 2Ah
Card B ExCA offset 6Ah
ExCA memory window 4 end-address low-byte
CardBus socket address + 832h; Card A ExCA offset 32h
Card B ExCA offset 72h
Read/Write
00h
5−17
5.16 ExCA Memory Windows 0−4 End-Address High-Byte Registers
These registers contain the high nibble of the 16-bit memory window end address for memory windows 0, 1, 2, 3,
and 4. The lower 4 bits of these registers correspond to bits A23−A20 of the end address. In addition, the memory
window wait states are set in this register. See Table 5−12 for a complete description of the register contents.
Bit
7
6
RW
RW
R
R
RW
0
0
0
0
0
Name
Type
Default
5
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 end-address high-byte
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 end-address high-byte
CardBus socket address + 813h; Card A ExCA offset 13h
Card B ExCA offset 53h
ExCA memory window 1 end-address high-byte
CardBus socket address + 81Bh; Card A ExCA offset 1Bh
Card B ExCA offset 5Bh
ExCA memory window 2 end-address high-byte
CardBus socket address + 823h; Card A ExCA offset 23h
Card B ExCA offset 63h
ExCA memory window 3 end-address high-byte
CardBus socket address + 82Bh; Card A ExCA offset 2Bh
Card B ExCA offset 6Bh
ExCA memory window 4 end-address high-byte
CardBus socket address + 833h; Card A ExCA offset 33h
Card B ExCA offset 73h
Read-only, Read/Write
00h
Table 5−12. ExCA Memory Windows 0−4 End-Address High-Byte Registers Description
5−18
BIT
SIGNAL
TYPE
FUNCTION
7−6
MEMWS
RW
Wait state. Bits 7 and 6 specify the number of equivalent ISA wait states to be added to 16-bit memory
accesses. The number of wait states added is equal to the binary value of these two bits.
5−4
RSVD
R
3−0
ENDHN
RW
Reserved. Bits 5 and 4 return 0s when read.
End-address high nibble. Bits 3−0 represent the upper address bits A23−A20 of the memory window end
address.
5.17 ExCA Memory Windows 0−4 Offset-Address Low-Byte Registers
These registers contain the low byte of the 16-bit memory window offset address for memory windows 0, 1, 2, 3, and
4. The 8 bits of these registers correspond to bits A19−A12 of the offset address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 offset-address low-byte
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 offset-address low-byte
CardBus socket address + 814h; Card A ExCA offset 14h
Card B ExCA offset 54h
ExCA memory window 1 offset-address low-byte
CardBus socket address + 81Ch; Card A ExCA offset 1Ch
Card B ExCA offset 5Ch
ExCA memory window 2 offset-address low-byte
CardBus socket address + 824h; Card A ExCA offset 24h
Card B ExCA offset 64h
ExCA memory window 3 offset-address low-byte
CardBus socket address + 82Ch; Card A ExCA offset 2Ch
Card B ExCA offset 6Ch
ExCA memory window 4 offset-address low-byte
CardBus socket address + 834h; Card A ExCA offset 34h
Card B ExCA offset 74h
Read/Write
00h
5−19
5.18 ExCA Memory Windows 0−4 Offset-Address High-Byte Registers
These registers contain the high 6 bits of the 16-bit memory window offset address for memory windows 0, 1, 2, 3,
and 4. The lower 6 bits of these registers correspond to bits A25−A20 of the offset address. In addition, the write
protection and common/attribute memory configurations are set in this register. See Table 5−13 for a complete
description of the register contents.
Bit
7
6
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
5
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA memory windows 0−4 offset-address high-byte
Default
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA memory window 0 offset-address high-byte
CardBus socket address + 815h; Card A ExCA offset 15h
Card B ExCA offset 55h
ExCA memory window 1 offset-address high-byte
CardBus socket address + 81Dh; Card A ExCA offset 1Dh
Card B ExCA offset 5Dh
ExCA memory window 2 offset-address high-byte
CardBus socket address + 825h; Card A ExCA offset 25h
Card B ExCA offset 65h
ExCA memory window 3 offset-address high-byte
CardBus socket address + 82Dh; Card A ExCA offset 2Dh
Card B ExCA offset 6Dh
ExCA memory window 4 offset-address high-byte
CardBus socket address + 835h; Card A ExCA offset 35h
Card B ExCA offset 75h
Read/Write
00h
Table 5−13. ExCA Memory Windows 0−4 Offset-Address High-Byte Registers Description
BIT
5−20
SIGNAL
TYPE
FUNCTION
7
WINWP
RW
Write protect. Bit 7 specifies whether write operations to this memory window are enabled. This bit is
encoded as:
0 = Write operations are allowed (default).
1 = Write operations are not allowed.
6
REG
RW
Bit 6 specifies whether this memory window is mapped to card attribute or common memory. This bit is encoded
as:
0 = Memory window is mapped to common memory (default).
1 = Memory window is mapped to attribute memory.
5−0
OFFHB
RW
Offset-address high byte. Bits 5−0 represent the upper address bits A25−A20 of the memory window
offset address.
5.19 ExCA Card Detect and General Control Register
The ExCA card detect and general control register controls how the ExCA registers for the socket respond to card
removal, as well as reports the status of VS1 and VS2 at the PC Card interface. See Table 5−14 for a complete
description of the register contents.
Bit
7
6
5
Type
R
R
RW
RW
Default
X
X
0
0
Name
4
3
2
1
0
R
R
RW
R
0
0
0
0
ExCA I/O card detect and general control
Register:
Offset:
Type:
Default:
ExCA card detect and general control
CardBus socket address + 816h; Card A ExCA offset 16h
Card B ExCA offset 56h
Read-only, Read/Write
XX00 0000b
Table 5−14. ExCA Card Detect and General Control Register Description
BIT
7
6
5
SIGNAL
VS2STAT
VS1STAT
SWCSC
TYPE
FUNCTION
R
VS2 state. Bit 7 reports the current state of VS2 at the PC Card interface and, therefore, does not have
a default value.
0 = VS2 low
1 = VS2 high
R
VS1 state. Bit 6 reports the current state of VS1 at the PC Card interface and, therefore, does not have
a default value.
0 = VS1 low
1 = VS1 high
RW
Software card detect interrupt. If bit 3 (CDEN) in the ExCA card status-change interrupt configuration
register (ExCA offset 05h/45h/805, see Section 5.6) is set, then writing a 1 to bit 5 causes a card-detect
card-status change interrupt for the associated card socket. If bit 3 (CDEN) in the ExCA card
status-change-interrupt configuration register (ExCA offset 05h/45h/805, see Section 5.6) is cleared to 0,
then writing a 1 to bit 5 has no effect. A read operation of this bit always returns 0.
Card detect resume enable. If bit 4 is set to 1, then once a card detect change has been detected on CD1
and CD2 inputs, RI_OUT goes from high to low. RI_OUT remains low until bit 0 (card status change) in
the ExCA card status-change register is cleared (see Section 5.5). If this bit is a 0, then the card detect
resume functionality is disabled.
0 = Card detect resume disabled (default)
1 = Card detect resume enabled
4
CDRESUME
RW
3−2
RSVD
R
1
REGCONFIG
RW
0
RSVD
R
Reserved. Bits 3 and 2 return 0s when read.
Register configuration on card removal. Bit 1 controls how the ExCA registers for the socket react to a card
removal event. This bit is encoded as:
0 = No change to ExCA registers on card removal (default)
1 = Reset ExCA registers on card removal
Reserved. Bit 0 returns 0 when read.
5−21
5.20 ExCA Global Control Register
The ExCA global control register controls both PC Card sockets and is not duplicated for each socket. The host
interrupt mode bits in this register are retained for Intel 82365SL-DF compatibility. See Table 5−15 for a complete
description of the register contents.
Bit
7
6
5
4
Type
R
R
R
RW
Default
0
0
0
0
Name
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA global control
Register:
Offset:
Type:
Default:
ExCA global control
CardBus socket address + 81Eh; Card A ExCA offset 1Eh
Card B ExCA offset 5Eh
Read-only, Read/Write
00h
Table 5−15. ExCA Global Control Register Description
BIT
SIGNAL
TYPE
7−5
RSVD
R
4
3
2
1
0
5−22
INTMODEB
INTMODEA
IFCMODE
CSCMODE
PWRDWN
FUNCTION
Reserved. Bits 7−5 return 0s when read.
RW
Level/edge interrupt mode select − card B. Bit 4 selects the signaling mode for the PCI1520 host interrupt
for card B interrupts. This bit is encoded as:
0 = Host interrupt is edge mode (default).
1 = Host interrupt is level mode.
RW
Level/edge interrupt mode select − card A. Bit 3 selects the signaling mode for the PCI1520 host interrupt
for card A interrupts. This bit is encoded as:
0 = Host interrupt is edge mode (default).
1 = Host interrupt is level mode.
RW
Interrupt flag clear mode select. Bit 2 selects the interrupt flag clear mechanism for the flags in the ExCA
card status change register (ExCA offset 04h/44h/804h, see Section 5.5). This bit is encoded as:
0 = Interrupt flags are cleared by read of CSC register (default).
1 = Interrupt flags are cleared by explicit writeback of 1.
RW
Card status change level/edge mode select. Bit 1 selects the signaling mode for the PCI1520 host interrupt
for card status changes. This bit is encoded as:
0 = Host interrupt is edge mode (default).
1 = Host interrupt is level mode.
RW
Power-down mode select. When bit 0 is set to 1, the PCI1520 is in power-down mode. In power-down mode,
the PCI1520 card outputs are high-impedance until an active cycle is executed on the card interface.
Following an active cycle, the outputs are again high-impedance. The PCI1520 still receives functional
interrupts and/or card status-change interrupts; however, an actual card access is required to wake up the
interface. This bit is encoded as:
0 = Power-down mode is disabled (default).
1 = Power-down mode is enabled.
5.21 ExCA I/O Windows 0 and 1 Offset-Address Low-Byte Registers
These registers contain the low byte of the 16-bit I/O window offset address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the lower 8 bits of the offset address, and bit 0 is always 0.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
R
0
0
0
ExCA I/O windows 0 and 1 offset-address low-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 offset-address low-byte
CardBus socket address + 836h; Card A ExCA offset 36h
Card B ExCA offset 76h
ExCA I/O window 1 offset-address low-byte
CardBus socket address + 838h; Card A ExCA offset 38h
Card B ExCA offset 78h
Read-only, Read/Write
00h
5.22 ExCA I/O Windows 0 and 1 Offset-Address High-Byte Registers
These registers contain the high byte of the 16-bit I/O window offset address for I/O windows 0 and 1. The 8 bits of
these registers correspond to the upper 8 bits of the offset address.
Bit
7
6
5
RW
RW
RW
RW
RW
0
0
0
0
0
Name
Type
Default
4
3
2
1
0
RW
RW
RW
0
0
0
ExCA I/O windows 0 and 1 offset-address high-byte
Register:
Offset:
Register:
Offset:
Type:
Default:
ExCA I/O window 0 offset-address high-byte
CardBus socket address + 837h; Card A ExCA offset 37h
Card B ExCA offset 77h
ExCA I/O window 1 offset-address high-byte
CardBus socket address + 839h; Card A ExCA offset 39h
Card B ExCA offset 79h
Read/Write
00h
5−23
5.23 ExCA Memory Windows 0−4 Page Registers
The upper 8 bits of a 4-byte PCI memory address are compared to the contents of this register when decoding
addresses for 16-bit memory windows. Each window has its own page register, all of which default to 00h. By
programming this register to a nonzero value, host software can locate 16-bit memory windows in any 1 of 256
16-Mbyte regions in the 4-Gbyte PCI address space. These registers are only accessible when the ExCA registers
are memory-mapped; that is, these registers cannot be accessed using the index/data I/O scheme.
Bit
7
6
5
RW
RW
RW
RW
0
0
0
0
Name
Type
Default
3
2
1
0
RW
RW
RW
RW
0
0
0
0
ExCA memory windows 0−4 page
Register:
Offset:
Type:
Default:
5−24
4
ExCA memory windows 0−4 page
CardBus socket address + 840h, 841h, 842h, 843h, 844h
Read/Write
00h
6 CardBus Socket Registers (Functions 0 and 1)
The 1997 PC Card Standard requires a CardBus socket controller to provide five 32-bit registers that report and
control socket-specific functions. The PCI1520 provides the CardBus socket/ExCA base-address register (PCI offset
10h, see Section 4.12) to locate these CardBus socket registers in PCI memory address space. Each socket has a
separate base address register for accessing the CardBus socket registers (see Figure 6−1). Table 6−1 gives the
location of the socket registers in relation to the CardBus socket/ExCA base address.
The PCI1520 implements an additional register at offset 20h that provides power management control for the socket.
PCI1520 Configuration Registers
Offset
Host
Memory Space
Offset
Host
Memory Space
Offset
00h
10h
CardBus Socket/ExCA Base Address
CardBus
Socket A
Registers
00h
20h
800h
44h
16-Bit Legacy-Mode Base Address
CardBus
Socket B
Registers
20h
ExCA
Registers
Card A
800h
844h
ExCA
Registers
Card B
844h
NOTE: The CardBus socket/ExCA base address mode register is separate for functions 0 and 1.
Figure 6−1. Accessing CardBus Socket Registers Through PCI Memory
Table 6−1. CardBus Socket Registers
REGISTER NAME
OFFSET
Socket event
00h
Socket mask
04h
Socket present-state
08h
Socket force event
0Ch
Socket control
Reserved
Socket power-management
10h
14h−1Ch
20h
A bit description table, typically included when a register contains bits of more than one type or purpose, indicates
bit field names, which appear in the signal column; a detailed field description, which appears in the function column;
and field access tags, which appear in the type column of the bit description table. Table 4−2 describes the field
access tags.
6−1
6.1 Socket Event Register
The socket event register indicates a change in socket status has occurred. These bits do not indicate what the
change is, only that one has occurred. Software must read the socket present-state register (CB offset 08h, see
Section 6.3) for current status. Each bit in this register can be cleared by writing a 1 to that bit. The bits in this register
can be set to a 1 by software by writing a 1 to the corresponding bit in the socket force event register (CB offset 0Ch,
see Section 6.4). All bits in this register are cleared by PCI reset. They can be immediately set again, if, when coming
out of PC Card reset, the bridge finds the status unchanged (that is, CSTSCHG reasserted or card detect is still true).
Software must clear this register before enabling interrupts. If it is not cleared when interrupts are enabled, then an
interrupt is generated (but not masked) based on any bit set. See Table 6−2 for a complete description of the register
contents.
Bit
31
30
29
28
27
26
25
R
R
R
R
R
R
R
R
Name
Type
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
Socket event
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
R
R
R
R
R/C
R/C
R/C
R/C
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Socket event
Register:
Offset:
Type:
Default:
Socket event
CardBus socket address + 00h
Read-only, Read/Write, Read/Clear
0000 0000h
Table 6−2. Socket Event Register Description
BIT
SIGNAL
TYPE
31−4
RSVD
R
3
PWREVENT
R/C
Power cycle. Bit 3 is set when the PCI1520 detects that bit 3 (PWRCYCLE) in the socket present-state
register (CB offset 08h, see Section 6.3) has changed state. This bit is cleared by writing a 1.
2
CD2EVENT
R/C
CCD2. Bit 2 is set when the PCI1520 detects that bit 2 (CDETECT2) in the socket present-state register
(CB offset 08h, see Section 6.3) has changed state. This bit is cleared by writing a 1.
1
CD1EVENT
R/C
CCD1. Bit 1 is set when the PCI1520 detects that bit 1 (CDETECT1) in the socket present-state register
(CB offset 08h, see Section 6.3) has changed state. This bit is cleared by writing a 1.
0
CSTSEVENT
R/C
CSTSCHG. Bit 0 is set when bit 0 (CARDSTS) in the socket present-state register (CB offset 08h, see
Section 6.3) has changed state. For CardBus cards, bit 0 is set on the rising edge of CSTSCHG. For 16-bit
PC Cards, bit 0 is set on both transitions of CSTSCHG. This bit is reset by writing a 1.
6−2
FUNCTION
Reserved. Bits 31−4 return 0s when read.
6.2 Socket Mask Register
The socket mask register allows software to control the CardBus card events that generate a status change interrupt.
The state of these mask bits does not prevent the corresponding bits from reacting in the socket event register (CB
offset 00h, see Section 6.1). See Table 6−3 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
R
R
R
R
R
R
R
R
Name
Type
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
Socket mask
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
R
R
R
R
RW
RW
RW
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Socket mask
Register:
Offset:
Type:
Default:
Socket mask
CardBus socket address + 04h
Read-only, Read/Write
0000 0000h
Table 6−3. Socket Mask Register Description
BIT
SIGNAL
TYPE
31−4
RSVD
R
3
2−1
0
PWRMASK
CDMASK
CSTSMASK
FUNCTION
Reserved. Bits 31−4 return 0s when read.
RW
Power cycle. Bit 3 masks bit 3 (PWRCYCLE) in the socket present-state register (CB offset 08h, see
Section 6.3) from causing a status change interrupt.
0 = PWRCYCLE event does not cause CSC interrupt (default).
1 = PWRCYCLE event causes CSC interrupt.
RW
Card detect mask. Bits 2 and 1 mask bits 1 and 2 (CDETECT1 and CDETECT2) in the socket present-state
register (CB offset 08h, see Section 6.3) from causing a CSC interrupt.
00 = Insertion/removal does not cause CSC interrupt (default).
01 = Reserved (undefined)
10 = Reserved (undefined)
11 = Insertion/removal causes CSC interrupt.
RW
CSTSCHG mask. Bit 0 masks bit 0 (CARDSTS) in the socket present-state register (CB offset 08h, see
Section 6.3) from causing a CSC interrupt.
0 = CARDSTS event does not cause CSC interrupt (default).
1 = CARDSTS event causes CSC interrupt.
6−3
6.3 Socket Present-State Register
The socket present-state register reports information about the socket interface. Write transactions to the socket force
event register (CB offset 0Ch, see Section 6.4) are reflected here, as well as general socket interface status.
Information about PC Card VCC support and card type is only updated at each insertion. Also note that the PCI1520
uses CCD1 and CCD2 during card identification, and changes on these signals during this operation are not reflected
in this register. See Table 6−4 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
R
R
R
R
R
R
R
R
Name
Type
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
Socket present-state
Default
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Default
0
0
0
0
0
0
0
0
0
X
0
0
0
X
X
X
Name
Socket present-state
Register:
Offset:
Type:
Default:
Socket present-state
CardBus socket address + 08h
Read-only
3000 00XXh
Table 6−4. Socket Present-State Register Description
BIT
SIGNAL
TYPE
FUNCTION
31
YVSOCKET
R
YV socket. Bit 31 indicates whether or not the socket can supply VCC = Y.Y V to PC Cards. The PCI1520
does not support Y.Y-V VCC; therefore, this bit is always reset unless overridden by the socket force event
register (CB offset 0Ch, see Section 6.4). This bit is hardwired to 0.
30
XVSOCKET
R
XV socket. Bit 30 indicates whether or not the socket can supply VCC = X.X V to PC Cards. The PCI1520
does not support X.X-V VCC; therefore, this bit is always reset unless overridden by the socket force event
register (CB offset 0Ch, see Section 6.4). This bit is hardwired to 0.
29
3VSOCKET
R
3-V socket. Bit 29 indicates whether or not the socket can supply VCC = 3.3 V to PC Cards. The PCI1520
does support 3.3-V VCC; therefore, this bit is always set unless overridden by the socket force event
register (CB offset 0Ch, see Section 6.4).
28
5VSOCKET
R
5-V socket. Bit 28 indicates whether or not the socket can supply VCC = 5 V to PC Cards. The PCI1520
does support 5-V VCC; therefore, this bit is always set unless overridden by the socket force event register
(CB offset 0Ch, see Section 6.4).
27
ZVSUPPORT
R
Zoomed-video support. This bit indicates whether or not the socket has support for zoomed video.
0 = Zoomed video is not supported.
1 = Zoomed video is supported.
26−14
RSVD
R
Reserved. Bits 27−14 return 0s when read.
13
YVCARD
R
YV card. Bit 13 indicates whether or not the PC Card inserted in the socket supports VCC = Y.Y V.
0 = Y.Y-V VCC is not supported.
1 = Y.Y-V VCC is supported.
12
XVCARD
R
11
3VCARD
R
6−4
XV card. Bit 12 indicates whether or not the PC Card inserted in the socket supports VCC = X.X V.
0 = X.X-V VCC is not supported.
1 = X.X-V VCC is supported.
3-V card. Bit 11 indicates whether or not the PC Card inserted in the socket supports VCC = 3.3 V.
0 = 3.3-V VCC is not supported.
1 = 3.3-V VCC is supported.
Table 6−4. Socket Present-State Register (Continued)
BIT
SIGNAL
TYPE
10
5VCARD
R
5-V card. Bit 10 indicates whether or not the PC Card inserted in the socket supports VCC = 5 V.
0 = 5-V VCC is not supported.
1 = 5-V VCC is supported.
R
Bad VCC request. Bit 9 indicates that the host software has requested that the socket be powered at an
invalid voltage.
0 = Normal operation (default)
1 = Invalid VCC request by host software
R
Data lost. Bit 8 indicates that a PC Card removal event may have caused lost data because the cycle did
not terminate properly or because write data still resides in the PCI1520.
0 = Normal operation (default)
1 = Potential data loss due to card removal
9
8
BADVCCREQ
DATALOST
FUNCTION
7
NOTACARD
R
Not a card. Bit 7 indicates that an unrecognizable PC Card has been inserted in the socket. This bit is not
updated until a valid PC Card is inserted into the socket.
0 = Normal operation (default)
1 = Unrecognizable PC Card detected
6
IREQCINT
R
READY(IREQ)//CINT. Bit 6 indicates the current status of READY(IREQ)//CINT at the PC Card interface.
0 = READY(IREQ)//CINT low
1 = READY(IREQ)//CINT high
5
CBCARD
R
CardBus card detected. Bit 5 indicates that a CardBus PC Card is inserted in the socket. This bit is not
updated until another card interrogation sequence occurs (card insertion).
4
16BITCARD
R
16-bit card detected. Bit 4 indicates that a 16-bit PC Card is inserted in the socket. This bit is not updated
until another card interrogation sequence occurs (card insertion).
3
PWRCYCLE
R
Power cycle. Bit 3 indicates the status of each card powering request. This bit is encoded as:
0 = Socket powered down (default)
1 = Socket powered up
2
CDETECT2
R
CCD2. Bit 2 reflects the current status of CCD2 at the PC Card interface. Changes to this signal during
card interrogation are not reflected here.
0 = CCD2 low (PC Card may be present)
1 = CCD2 high (PC Card not present)
1
CDETECT1
R
CCD1. Bit 1 reflects the current status of CCD1 at the PC Card interface. Changes to this signal during
card interrogation are not reflected here.
0 = CCD1 low (PC Card may be present)
1 = CCD1 high (PC Card not present)
0
CARDSTS
R
CSTSCHG. Bit 0 reflects the current status of CSTSCHG at the PC Card interface.
0 = CSTSCHG low
1 = CSTSCHG high
6−5
6.4 Socket Force Event Register
The socket force event register is used to force changes to the socket event register (CB offset 00h, see Section 6.1)
and the socket present-state register (see Section 6.3). Bit 14 (CVSTEST) in this register must be written when
forcing changes that require card interrogation. See Table 6−5 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
R
R
R
R
W
R
R
R
Name
Type
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
Socket force event
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
W
W
W
W
W
W
W
W
R
W
W
W
W
W
W
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Socket force event
Register:
Offset:
Type:
Default:
6−6
Socket force event
CardBus socket address + 0Ch
Read-only, Write-only
0000 0000h
Table 6−5. Socket Force Event Register Description
BIT
SIGNAL
TYPE
FUNCTION
31−28
RSVD
R
Reserved. Bits 31−28 return 0s when read.
27
FZVSUPPORT
W
Zoomed-video support. This bit indicates whether or not the socket has support for zoomed video.
26−15
RSVD
R
Reserved. Bits 26−15 return 0s when read.
14
CVSTEST
W
Card VS test. When bit 14 is set, the PCI1520 re-interrogates the PC Card, updates the socket present-state
register (CB offset 08h, see Section 6.3), and enables the socket control register (CB offset 10h, see
Section 6.5).
13
FYVCARD
W
Force YV card. Write transactions to bit 13 cause bit 13 (YVCARD) in the socket present-state register (CB
offset 08h, see Section 6.3) to be written. When set, this bit disables the socket control register (CB offset
10h, see Section 6.5).
12
FXVCARD
W
Force XV card. Write transactions to bit 12 cause bit 12 (XVCARD) in the socket present-state register (CB
offset 08h, see Section 6.3) to be written. When set, this bit disables the socket control register (CB offset
10h, see Section 6.5).
11
F3VCARD
W
Force 3-V card. Write transactions to bit 11 cause bit 11 (3VCARD) in the socket present-state register (CB
offset 08h, see Section 6.3) to be written. When set, this bit disables the socket control register (CB offset
10h, see Section 6.5).
10
F5VCARD
W
Force 5-V card. Write transactions to bit 10 cause bit 10 (5VCARD) in the socket present-state register (CB
offset 08h, see Section 6.3) to be written. When set, this bit disables the socket control register (CB offset
10h, see Section 6.5).
9
FBADVCCREQ
W
Force bad VCC request. Changes to bit 9 (BADVCCREQ) in the socket present-state register (CB offset 08h,
see Section 6.3) can be made by writing to bit 9.
8
FDATALOST
W
Force data lost. Write transactions to bit 8 cause bit 8 (DATALOST) in the socket present-state register (CB
offset 08h, see Section 6.3) to be written.
7
FNOTACARD
W
Force not-a-card. Write transactions to bit 7 cause bit 7 (NOTACARD) in the socket present-state register
(CB offset 08h, see Section 6.3) to be written.
6
RSVD
R
Reserved. Bit 6 returns 0 when read.
5
FCBCARD
W
Force CardBus card. Write transactions to bit 5 cause bit 5 (CBCARD) in the socket present-state register
(CB offset 08h, see Section 6.3) to be written.
4
F16BITCARD
W
Force 16-bit card. Write transactions to bit 4 cause bit 4 (16BITCARD) in the socket present-state register
(CB offset 08h, see Section 6.3) to be written.
3
FPWRCYCLE
W
Force power cycle. Write transactions to bit 3 cause bit 3 (PWREVENT) in the socket event register (CB
offset 00h, see Section 6.1) to be written, and bit 3 (PWRCYCLE) in the socket present-state register (CB
offset 08h, see Section 6.3) is unaffected.
2
FCDETECT2
W
Force CCD2. Write transactions to bit 2 cause bit 2 (CD2EVENT) in the socket event register (CB offset 00h,
see Section 6.1) to be written, and bit 2 (CDETECT2) in the socket present-state register (CB offset 08h,
see Section 6.3) is unaffected.
1
FCDETECT1
W
Force CCD1. Write transactions to bit 1 cause bit 1 (CD1EVENT) in the socket event register (CB offset 00h,
see Section 6.1) to be written, and bit 1 (CDETECT1) in the socket present-state register (CB offset 08h,
see Section 6.3) is unaffected.
0
FCARDSTS
W
Force CSTSCHG. Write transactions to bit 0 cause bit 0 (CSTSEVENT) in the socket event register (CB
offset 00h, see Section 6.1) to be written, and bit 0 (CARDSTS) in the socket present-state register (CB
offset 08h, see Section 6.3) is unaffected.
6−7
6.5 Socket Control Register
The socket control register provides control of the voltages applied to the socket and instructions for the CB CLKRUN
protocol. The PCI1520 ensures that the socket is powered up only at acceptable voltages when a CardBus card is
inserted. See Table 6−6 for a complete description of the register contents.
Bit
31
30
29
28
27
26
25
R
R
R
R
R
R
R
R
Name
Type
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
R
R
Socket control
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
RW
R
RW
RW
RW
RW
R
RW
RW
RW
Default
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
Name
Socket control
Register:
Offset:
Type:
Default:
Socket control
CardBus socket address + 10h
Read-only, Read/Write
0000 0400h
Table 6−6. Socket Control Register Description
BIT
SIGNAL
TYPE
31−12
RSVD
R
Reserved. These bits return 0 when read. A write to these bits has no effect.
11
ZV_ACTIVITY
R
Zoomed video activity. This bit returns 0 when the ZVEN bits for both sockets are 0 (disabled). If either
ZVEN bit is set to 1, the ZV_ACTIVITY bit returns 1.
10
STDZVREG
R
Standardized zoomed video register model support. This bit returns 1 by default when the STDZVEN
bit (bit 0) in the diagnostic register is cleared (PCI offset 93h, see Section 4.34).
9
ZVEN
RW
8
RSVD
R
7
Reserved. ThIs bit returns 0 when read. A write to thIs bit has no effect.
RW
VCC control. Bits 6−4 request card VCC changes.
000 = Request power off (default)
100 = Request VCC = X.X V
001 = Reserved
101 = Request VCC = Y.Y V
010 = Request VCC = 5 V
110 = Reserved
011 = Request VCC = 3.3 V
111 = Reserved
VCCCTRL
RW
3
RSVD
R
VPPCTRL
Zoomed video enable. This bit enables zoomed video for this socket.
CB CLKRUN protocol instructions.
0 = CB CLKRUN protocol can only attempt to stop/slow the CB clock if the socket is idle and the
PCI CLKRUN protocol is preparing to stop/slow the PCI bus clock.
1 = CB CLKRUN protocol can attempt to stop/slow the CB clock if the socket is idle.
6−4
2−0
6−8
STOPCLK
FUNCTION
RW
Reserved. Bit 3 returns 0 when read.
VPP control. Bits 2−0 request card VPP changes.
000 = Request power off (default)
100 = Request VPP = X.X V
001 = Request VPP = 12 V
101 = Request VPP = Y.Y V
010 = Request VPP = 5 V
110 = Reserved
011 = Request VPP = 3.3 V
111 = Reserved
6.6 Socket Power-Management Register
This register provides power management control over the socket through a mechanism for slowing or stopping the
clock on the card interface when the card is idle. See Table 6−7 for a complete description of the register contents.
Bit
31
30
29
28
27
26
R
R
R
R
R
R
R
R
R
Name
Type
25
24
23
22
21
20
19
18
17
16
R
R
R
R
R
R
RW
Socket power-management
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Type
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
RW
Default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Name
Socket power-management
Register:
Type:
Offset:
Default:
Socket power-management
Read-only, Read/Write
CardBus socket address + 20h
0000 0000h
Table 6−7. Socket Power-Management Register Description
BIT
SIGNAL
TYPE
31−26
RSVD
R
Reserved. Bits 31−26 return 0s when read.
FUNCTION
25
SKTACCES
R
Socket access status. This bit provides information on when a socket access has occurred. This bit is
cleared by a read access.
0 = A PC card access has not occurred (default).
1 = A PC card access has occurred.
24
SKTMODE
R
Socket mode status. This bit provides clock mode information.
0 = Clock is operating normally.
1 = Clock frequency has changed.
23−17
RSVD
R
Reserved. Bits 23−17 return 0s when read.
16
CLKCTRLEN
RW
15−1
RSVD
R
0
CLKCTRL
RW
CardBus clock control enable. When bit 16 is set, bit 0 (CLKCTRL) is enabled.
0 = Clock control is disabled (default).
1 = Clock control is enabled.
Reserved. Bits 15−1 return 0s when read.
CardBus clock control. This bit determines whether the CB CLKRUN protocol stops or slows the CB clock
during idle states. Bit 16 (CLKCTRLEN) enables this bit.
0 = Allows CB CLKRUN protocol to stop the CB clock (default).
1 = Allows CB CLKRUN protocol to slow the CB clock by a factor of 16.
6−9
6−10
7 Electrical Characteristics
7.1 Absolute Maximum Ratings Over Operating Temperature Ranges†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.6 V
Clamping voltage range, VCCP, VCCA, VCCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 6 V
Input voltage range, VI: PCI, miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCCP + 0.5 V
Card A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VCCA + 0.5 V
Card B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VCCB + 0.5 V
Fail safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Output voltage range, VO: PCI, miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCCP + 0.5 V
Card A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VCCA + 0.5 V
Card B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VCCB + 0.5 V
Fail safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Applies for external input and bidirectional buffers. VI > VCC does not apply to fail-safe terminals. PCI terminals and miscellaneous
terminals are measured with respect to VCCP instead of VCC. PC Card terminals are measured with respect to VCCA or VCCB. The
limit specified applies for a dc condition.
2. Applies for external output and bidirectional buffers. VO > VCC does not apply to fail-safe terminals. PCI terminals and miscellaneous
terminals are measured with respect to VCCP instead of VCC. PC Card terminals are measured with respect to VCCA or VCCB. The
limit specified applies for a dc condition.
7−1
7.2 Recommended Operating Conditions (see Note 3)
OPERATION
VCC
Core voltage
Commercial
VCCP
PCI and miscellaneous I/O clamp
voltage
Commercial
VCCA
VCCB
PC Card I/O clamp voltage
Commercial
High-level input voltage
3
3.3
3.6
3
3.3
3.6
4.75
5
5.25
3
3.3
3.6
4.75
5
5.25
5V
5V
5V
3.3 V
PC Card
5V
Miscellaneous‡
PCI
VIL†
VI
VO§
Low-level input voltage
Input voltage
Output voltage
PC Card
MAX
3.3 V
3.3 V
VIH†
NOM
3.3 V
3.3 V
PCI
MIN
0.5 VCCP
0.475 VCC(A/B)
VCC(A/B)
VCC(A/B)
2.4
2
0
5V
0
3.3 V
0
5V
0
0.8
0
VCCP
PC Card
Miscellaneous‡
0
VCC(A/B)
VCC
PCI
0
PC Card
Miscellaneous‡
0
1
VCC
4
0
6
TA
Operating ambient temperature
range
PCI1520I
0
VCC
VCC
0
−40
V
V
0.8
PCI
PCI and PC Card
Miscellaneous‡
V
0.8
0.325 VCC(A/B)
0
Input transition time (tr and tf)
V
VCC
0.3 VCCP
Miscellaneous‡
tt
V
VCCP
VCCP
2
3.3 V
UNIT
25
85
V
V
ns
°C
† Applies to external inputs and bidirectional buffers without hysteresis
‡ Miscellaneous terminals are 15, 56, 68, 75, 83, 124, 137, 144, 158, and 177 for the PDV packaged device and C11, C15, G18, H05, J15, L18,
P07, P09, U08, and U11 for the GHK packaged device (SUSPEND, GRST, CDx, and VSx terminals).
§ Applies to external output buffers
NOTE 3: Unused terminals (input or I/O) must be held high or low to prevent them from floating.
7−2
7.3 Electrical Characteristics Over Recommended Operating Conditions (unless
otherwise noted)
PARAMETER
TERMINALS
PCI
OPERATION
VOH
High-level output voltage
PC Card
0.9 VCC
5V
IOH = −2 mA
IOH = −0.5 mA
2.4
0.9 VCC
3.3 V
IOH = −1 mA
IOH = −0.15 mA
0.9 VCC
5V
IOH = −0.15 mA
2.4
5V
IOH = −4 mA
Miscellaneous
VOL
Low-level output voltage
PC Card
High-impedance, low-level output
current
Output terminals
IOZH
High-impedance, high-level output
current
Output terminals
VCC−0.6
0.1 VCC
0.55
IOL = 0.7 mA
0.1 VCC
5V
IOL = 0.7 mA
0.55
5V
3.6 V
IOZL
V
3.3 V
3.3 V
5.25 V
3.6 V
5.25 V
IOL = 4 mA
0.5
IOL = 1 mA
IOL = 1 mA
0.1 VCC
−1
VI = VCC†
VI = VCC†
10
−1
25
VI = GND
−1
I/O terminals
VI = GND
−10
VI = GND
VI = VCC‡
−330
VI = VCC‡
VI = VCC‡
20
5.25 V
VI = VCC‡
† For PCI and miscellaneous terminals, VI = VCCP. For PC Card terminals, VI = VCC(A/B).
‡ For I/O terminals, input leakage (IIL and IIH) includes IOZ leakage of the disabled output.
25
Low-level input current
Pullup terminals
3.6 V
Input terminals
IIH
High-level input current
5.25 V
3.6 V
I/O terminals
V
0.55
VI = VCC
VI = VCC
Input terminals
IIL
UNIT
V
IOL = 6 mA
5V
Miscellaneous
SPKROUT
MAX
2.4
IOL = 1.5 mA
3.3 V
PCI
MIN
IOH = −0.5 mA
3.3 V
SPKROUT
TEST CONDITIONS
3.3 V
µA
A
µA
A
µA
10
10
µA
7.4 PCI Clock/Reset Timing Requirements Over Recommended Ranges of Supply
Voltage and Operating Free-Air Temperature
PARAMETER
tc
tw(H)
Cycle time, PCLK
tw(L)
tr, tf
tw
tsu
Pulse duration (width), PRST
ALTERNATE
SYMBOL
TEST CONDITIONS
MIN
MAX
UNIT
30
ns
11
ns
Pulse duration (width), PCLK low
tcyc
thigh
tlow
Slew rate, PCLK
∆v/∆t
1
trst
1
ms
100
ms
Pulse duration (width), PCLK high
Setup time, PCLK active at end of PRST
trst-clk
11
ns
4
V/ns
7−3
7.5 PCI Timing Requirements Over Recommended Ranges of Supply Voltage and
Operating Free-Air Temperature
This data manual uses the following conventions to describe time ( t ) intervals. The format is tA, where subscript A
indicates the type of dynamic parameter being represented. One of the following is used: tpd = propagation delay time,
td (ten, tdis) = delay time, tsu = setup time, and th = hold time.
ALTERNATE
SYMBOL
PARAMETER
tpd
Propagation delay time, See Note 4
PCLK-to-shared signal
valid delay time
tval
PCLK-to-shared signal
invalid delay time
tinv
ten
tdis
Enable time, high impedance-to-active delay time from PCLK
tsu
th
Setup time before PCLK valid
Disable time, active-to-high impedance delay time from PCLK
Hold time after PCLK high
TEST CONDITIONS
MIN
CL = 50 pF,
See Note 4
UNIT
11
ns
2
ton
toff
2
tsu
th
7
ns
0
ns
NOTE 4: PCI shared signals are AD31−AD0, C/BE3−C/BE0, FRAME, TRDY, IRDY, STOP, IDSEL, DEVSEL, and PAR.
7−4
MAX
ns
28
ns
8 Mechanical Information
The PCI1520 is packaged in either a 209-ball GHK BGA or a 208-pin PDV package. The following shows the
mechanical dimensions for the GHK and PDV packages.
GHK (S-PBGA-N209)
PLASTIC BALL GRID ARRAY
16,10
SQ
15,90
14,40 TYP
0,80
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
0,80
1
3
2
0,95
0,85
5
4
9
7
6
8
11
10
13
12
15
14
17
16
19
18
1,40 MAX
Seating Plane
0,12
0,08
0,55
0,45
0,08 M
0,45
0,35
0,10
4145273−2/B 12/98
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. MicroStar BGA configuration.
MicroStar BGA is a trademark of Texas Instruments.
8−1
PDV (S-PQFP-G208)
PLASTIC QUAD FLATPACK
156
105
157
104
0,27
0,17
0,08 M
0,50
0,13 NOM
208
53
1
52
Gage Plane
25,50 TYP
28,05 SQ
27,95
0,25
0,05 MIN
0°−ā 7°
30,10
SQ
29,90
0,75
0,45
1,45
1,35
Seating Plane
0,08
1,60 MAX
4087729/B 06/96
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MO-136
8−2
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
PCI1520IGHKEP
ACTIVE
PCI1520IPDVEP
ACTIVE
V62/04613-01XA
ACTIVE
V62/04613-01YE
ACTIVE
Package
Type
BGA MI
CROSTA
R
LQFP
BGA MI
CROSTA
R
LQFP
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
MSL Peak Temp (3)
GHK
209
90
TBD
SNPB
Level-3-220C-168 HR
PDV
208
36
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
GHK
209
90
TBD
SNPB
Level-3-220C-168 HR
PDV
208
36
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF PCI1520-EP :
• Catalog: PCI1520
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
Addendum-Page 1