AVAGO MSA-0711-TR2

MSA-0711
Cascadable Silicon Bipolar MMIC Amplifier
Data Sheet
Description
Features
The MSA-0711 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface
mount plastic SOT‑143 package. This MMIC is designed
for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications.
• Cascadable 50 Ω Gain Block
The MSA-series is fabricated using Avago’s 10 GHz fT,
25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and
reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility.
SOT-143 Package
• 3 dB Bandwidth: DC to 1.9 GHz
• 12.0 dB Typical Gain at 1.0 GHz
• Unconditionally Stable (k>1)
• Low Cost Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
• Lead-free Option Available
Typical Biasing Configuration
R bias
VCC > 5 V
RFC (Optional)
C block
Pin Connections and Package Marking
A07x
Notes:
Top View. Package Marking provides orientation and identification.
"x" is the date code.
IN
C block
OUT
MSA
Vd = 3.8 V
MSA-0711 Absolute Maximum Ratings
Thermal Resistance[2]:
θjc = 505°C/W
Absolute Maximum[1]
50 mA
Parameter
Device Current
Power Dissipation[2,3]
175 mW
RF Input Power
+13 dBm
Junction Temperature
150°C
Storage Temperature
–65 to 150°C
Notes:
1. Permanent damage may occur if any
of these limits are exceeded.
2. TCASE = 25°C.
3. Derate at 2.0 mW/°C for TC > 62°C.
Electrical Specifications[1], TA = 25°C
Symbol
Parameters and Test Conditions: Id = 22 mA, ZO = 50 Ω
GP
Power Gain (|S21| 2)
∆GP
Gain Flatness
f = 0.1 to 1.3 GHz
f3 dB
3 dB Bandwidth
VSWR
f = 0.1 GHz
f = 1.0 GHz
Units
Min.
Typ.
dB
10.0
13.0
12.0
dB
±0.8
GHz
3.2
Input VSWR
f = 0.1 to 2.0 GHz
1.5:1
Output VSWR
f = 0.1 to 2.0 GHz
1.5:1
NF
50 Ω Noise Figure
f = 1.0 GHz
dB
5.0
P1 dB
Output Power at 1 dB Gain Compression
f = 1.0 GHz
dBm
5.5
IP3
Third Order Intercept Point
f = 1.0 GHz
dBm
18.0
tD
Group Delay
f = 1.0 GHz
psec
145
Vd
Device Voltage
TC = 25°C
V
3.0
3.8
dV/dT
Device Voltage Temperature Coefficient
mV/°C
–7.0
Max.
4.6
Note:
1. The recommended operating current range for this device is 15 to 30 mA. Typical performance as a function of current is on the following
page.
Ordering Information
Part Numbers
No. of Devices
Comments
MSA-0711-BLK
100
Bulk
MSA-0711-BLKG
100
Bulk
MSA-0711-TR1
3000
7" Reel
MSA-0711-TR1G
3000
7" Reel
MSA-0711-TR2
10000
13" Reel
MSA-0711-TR2G
10000
13" Reel
Note:
Order part number with a “G” suffix if lead-free option is desired.
MSA-0711 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 22 mA)
Freq.
GHz
0.1
0.2
0.4
0.6
0.8
1.0
1.5
2.0
2.5
3.0
3.5
4.0
S11
S21
Mag
Ang
.03
.04
.04
.05
.07
.08
.13
.18
.25
.32
.38
.42
1
1
–4
–19
–32
–44
–88
–130
–155
–178
165
152
S12
S22
dB
Mag
Ang
dB
Mag
Ang
Mag
Ang
13.0
12.9
12.8
12.6
12.3
12.0
10.9
9.8
8.6
7.2
5.8
4.5
4.47
4.42
4.38
4.28
4.14
3.99
3.52
3.08
2.68
2.30
1.96
1.68
174
168
157
146
135
123
98
75
61
42
26
12
–18.6
–18.5
–18.4
–18.1
–17.7
–17.4
–16.1
–15.2
–14.7
–14.7
–14.8
–14.7
.118
.119
.120
.125
.130
.135
.157
.173
.184
.185
.181
.184
1
2
4
9
10
12
13
8
9
5
3
1
.19
.19
.19
.19
.20
.19
.19
.18
.18
.17
.17
.20
–8
–18
–36
–52
–68
–82
–113
–138
–151
–158
–150
–142
Typical Performance, TA = 25°C
(unless otherwise noted)
14
Gain Flat to DC
G p (dB)
G p (dB)
12
8
6
2
0.1
0.3 0.5
1.0
3.0
6.0
Figure 1. Power Gain vs. Frequency, Id = 22
mA.
6.5
6.0
NF (dB)
5
4
3
6
FREQUENCY (GHz)
5.5
5.0
0.2 0.3
0.5
1.0
FREQUENCY (GHz)
Figure 4. Noise Figure vs. Frequency,
Id = 22 mA.
2.0 GHz
10
8
4
4.5
0.1
6
1.0 GHz
10
0
0.1 GHz
14
P1 dB (dBm)
12
7
16
2.0
4
10
20
30
I d (mA)
40
Figure 2. Power Gain vs. Current.
2
0.1
0.2
0.3
0.5
1.0
2.0
FREQUENCY (GHz)
Figure 3. Output Power at 1 dB Gain
Compression vs. Frequency, Id = 22 mA.
SOT-143 Package Dimensions
e2
e1
RF OUTPUT AND BIAS
GROUND
B1
XXX
E
E1
L
GROUND
B
RF INPUT
e
C
DIMENSIONS (mm)
D
A
A1
Notes:
XXX-package marking
Drawings are not to scale
SYMBOL
A
A1
B
B1
C
D
E1
e
e1
e2
E
L
MIN.
0.79
0.013
0.36
0.76
0.086
2.80
1.20
0.89
1.78
0.45
2.10
0.45
For product information and a complete list of distributors, please go to our web site:
MAX.
1.097
0.10
0.54
0.92
0.152
3.06
1.40
1.02
2.04
0.60
2.65
0.69
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-4454EN
AV02-0790EN - October 31, 2007