Cascadable Silicon Bipolar MMIC␣ Amplifier Technical Data MSA-2111 Features Description • Cascadable 50␣ Ω Gain Block The MSA-2111 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. • Medium Power: 10 dBm at 900 MHz • High Gain: 16.5 dB Typical at 900 MHz • Low Noise Figure: 3.3␣ dB Typical at 900 MHz • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available[1] Note: 1. Refer to PACKAGING section “Tapeand-Reel Packaging for Semiconductor Devices.” The MSA-series is fabricated using HP’s 10 GHz fT, 25␣ GHz f MAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block IN C block OUT MSA Vd = 3.6 V 5965-9663E 6-478 SOT-143 Package MSA-2111 Absolute Maximum Ratings Absolute Maximum[1] 40 mA 125 mW +13 dBm 150°C –65°C to 150°C Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Thermal Resistance[2]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 85°C. Electrical Specifications[1], TA = 25°C Symbol Parameters and Test Conditions: Id = 29 mA, ZO = 50 Ω GP Power Gain (|S21| 2) f = 900 MHz ∆GP Gain Flatness f = 0.1 to 0.3 GHz f3 dB 3 dB Bandwidth Units Min. Typ. dB 16.0 17.5 dB ± 0.5 GHz 0.5 Input VSWR f = 0.1 to 2.5 GHz 1.8:1 Output VSWR f = 0.1 to 2.5 GHz 1.8:1 NF 50 Ω Noise Figure f = 900 MHz dB 3.3 P1 dB Output Power at 1 dB Gain Compression f = 900 MHz dBm 10 IP3 Third Order Intercept Point f = 900 MHz dBm 20 tD Group Delay f = 900 MHz psec 158 VSWR Vd Device Voltage dV/dT Device Voltage Temperature Coefficient V mV/°C 2.9 3.6 Max. 4.3 –8.0 Notes: 1. The recommended operating current range for this device is 12 to 35 mA. Typical gain performance as a function of current is on the following page. Part Number Ordering Information Part Number MSA-2111-TR1 MSA-2111-BLK No. of Devices 3000 100 Container 7" Reel Antistatic Bag For more information, see “Tape and Reel Packaging for Semiconductor Devices”. 6-479 MSA-2111 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 29 mA) S11 S21 S12 S22 Freq. GHz Mag Ang dB Mag Ang dB Mag Ang Mag Ang k 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .28 .26 .24 .21 .18 .15 .13 .11 .09 .07 .08 .11 .15 .27 .38 .46 171 163 156 152 149 148 148 152 158 169 –123 –124 –167 158 145 135 23.0 22.5 21.9 21.2 20.5 19.7 19.0 18.3 17.6 16.9 14.0 11.8 10.1 8.3 6.8 5.6 14.1 13.4 12.5 11.5 10.6 9.7 8.9 8.2 7.6 7.0 5.0 3.9 3.2 2.6 2.2 1.9 167 156 145 136 128 120 114 108 102 98 79 63 56 43 32 21 –26.0 –25.5 –24.9 –24.0 –23.4 –22.6 –21.8 –21.1 –20.4 –19.9 –17.3 –15.5 –14.3 –13.5 –13.1 –12.6 .050 .053 .057 .063 .068 .074 .081 .088 .095 .101 .136 .167 .193 .211 .222 .234 9 18 25 30 35 38 40 42 43 44 45 42 43 38 34 30 .27 .27 .26 .26 .24 .24 .22 .21 .20 .19 .10 .06 .06 .12 .16 .17 177 175 173 171 170 169 169 169 168 169 179 –147 –177 149 145 144 1.03 1.03 1.03 1.03 1.03 1.03 1.04 1.04 1.04 1.05 1.06 1.08 1.10 1.13 1.14 1.14 Typical Performance, TA = 25°C (unless otherwise noted) 25 14 25 22 0.1 GHz 0.5 GHz 20 12 16 13 15 2.0 GHz 10 10 P1 dB (dBm) 0.9 GHz GP (dB) GP (dB) 19 Gain Flat to DC 10 8 5 7 4 0 0.1 0.3 0.5 1.0 3.0 6.0 10 15 20 25 I d (mA) FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, Id = 29 mA. Figure 2. Power Gain vs. Current. 4.0 NF (dB) 3.5 3.0 2.5 0.1 0.2 0.3 0.5 1.0 30 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 29 mA. 6-480 6 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 29 mA. SOT-143 Package Dimensions 0.92 (0.036) 0.78 (0.031) PACKAGE MARKING CODE GROUND XXX A06 RF INPUT 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) RF OUTPUT AND BIAS 1.40 (0.055) 1.20 (0.047) 2.65 (0.104) 2.10 (0.083) GROUND 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 3.06 (0.120) 2.80 (0.110) 1.02 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) 0.69 (0.027) 0.45 (0.018) DIMENSIONS ARE IN MILLIMETERS (INCHES) 6-481