Cascadable Silicon Bipolar MMIC␣ Amplifier Technical Data MSA-0711 Features Description • Cascadable 50 Ω Gain Block The MSA-0711 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface mount plastic SOT-143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. • 3 dB Bandwidth: DC to 1.9 GHz • 12.0 dB Typical Gain at 1.0␣ GHz • Unconditionally Stable (k>1) • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available[1] Note: 1. Refer to PACKAGING section “Tapeand-Reel Packaging for Surface Mount Semiconductors”. The MSA-series is fabricated using HP’s 10 GHz fT, 25␣ GHz f MAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metalli- Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block IN C block OUT MSA Vd = 3.8 V 5965-9590E 6-390 SOT-143 Package zation to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. MSA-0711 Absolute Maximum Ratings Absolute Maximum[1] 50 mA 175 mW +13 dBm 150°C –65 to 150°C Parameter Device Current Power Dissipation[2,3] RF Input Power Junction Temperature Storage Temperature Electrical Specifications[1], TA = 25°C Symbol GP Parameters and Test Conditions: Id = 22 mA, ZO = 50 Ω Power Gain (|S21| 2) ∆GP Gain Flatness f3 dB 3 dB Bandwidth VSWR f = 0.1 GHz f = 1.0 GHz f = 0.1 to 1.3 GHz Thermal Resistance[2,4]: θjc = 505°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 62°C. 4. See MEASUREMENTS section “Thermal Resistance” for more information. Units Min. Typ. 10.0 13.0 12.0 dB dB ± 0.8 GHz 3.2 Input VSWR f = 0.1 to 2.0 GHz 1.5:1 Output VSWR f = 0.1 to 2.0 GHz 1.5:1 NF 50 Ω Noise Figure f = 1.0 GHz dB 5.0 P1 dB Output Power at 1 dB Gain Compression f = 1.0 GHz dBm 5.5 IP3 Third Order Intercept Point f = 1.0 GHz dBm 18.0 tD Group Delay f = 1.0 GHz psec 145 Vd Device Voltage TC = 25°C dV/dT Device Voltage Temperature Coefficient V mV/°C 3.0 3.8 Max. 4.6 –7.0 Note: 1. The recommended operating current range for this device is 15 to 30 mA. Typical performance as a function of current is on the following page. Part Number Ordering Information Part Number MSA-0711-TR1 MSA-0711-BLK No. of Devices 3000 100 Container 7" Reel Antistatic Bag For more information, see “Tape and Reel Packaging for Semiconductor Devices”. 6-391 MSA-0711 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 22 mA) S21 S11 Freq. GHz Mag 0.1 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .03 .04 .04 .05 .07 .08 .13 .18 .25 .32 .38 .42 S12 S22 Ang dB Mag Ang dB Mag Ang Mag Ang 1 1 –4 –19 –32 –44 –88 –130 –155 –178 165 152 13.0 12.9 12.8 12.6 12.3 12.0 10.9 9.8 8.6 7.2 5.8 4.5 4.47 4.42 4.38 4.28 4.14 3.99 3.52 3.08 2.68 2.30 1.96 1.68 174 168 157 146 135 123 98 75 61 42 26 12 –18.6 –18.5 –18.4 –18.1 –17.7 –17.4 –16.1 –15.2 –14.7 –14.7 –14.8 –14.7 .118 .119 .120 .125 .130 .135 .157 .173 .184 .185 .181 .184 1 2 4 9 10 12 13 8 9 5 3 1 .19 .19 .19 .19 .20 .19 .19 .18 .18 .17 .17 .20 –8 –18 –36 –52 –68 –82 –113 –138 –151 –158 –150 –142 A model for this device is available in the DEVICE MODELS section. Typical Performance, TA = 25°C (unless otherwise noted) 14 Gain Flat to DC G p (dB) 12 8 6 2.0 GHz 10 2 4 3 6 0 0.1 0.3 0.5 1.0 3.0 6.0 FREQUENCY (GHz) Figure 1. Power Gain vs. Frequency, Id = 22 mA. 4 10 20 30 0.3 0.5 1.0 2.0 Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 22 mA. 5.0 1.0 0.2 Figure 2. Power Gain vs. Current. 5.5 0.5 2 0.1 FREQUENCY (GHz) 6.0 0.2 0.3 40 I d (mA) 6.5 NF (dB) 5 8 4 4.5 0.1 6 1.0 GHz 10 G p (dB) 0.1 GHz 14 P1 dB (dBm) 12 7 16 2.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 22 mA. 6-392 SOT-143 Package Dimensions 0.92 (0.036) 0.78 (0.031) PACKAGE MARKING CODE GROUND XXX A07 RF INPUT 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) RF OUTPUT AND BIAS 1.40 (0.055) 1.20 (0.047) 2.65 (0.104) 2.10 (0.083) GROUND 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 3.06 (0.120) 2.80 (0.110) 1.02 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) 0.69 (0.027) 0.45 (0.018) DIMENSIONS ARE IN MILLIMETERS (INCHES) 6-393