PM070WM3 Version: 2.0 TECHNICAL SPECIFICATION MODEL NO. : PM070WM3 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PM070WM3 Revision History Rev. 0.1 Issued Date Mar 24, 2009 1.0 Apr 27, 2009 2.0 Sep 18, 2009 Revised Contents Preliminary Modify Page 5 4. Mechanical Drawing of TFT-LCD module Modify Page 22 16. Reliability Test Modify Page 9 6-2) Electrical Performances: Operation Force from 50g to 80g Modify Page5~6 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PM070WM3 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input Terminals Touch Panel Characteristics Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing Diagram 1 2 3 4 4 4 5 7 9 10 11 12 13 14 15 18 18 21 22 23 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PM070WM3 1. Application This data sheet applies to a color TFT LCD module, PM070WM3. The applications of panel are OA product, which requires high quality flat panel display. Prime View assumes no responsibility for any damage resulting from the use of the device which does not complies with the instructions and the precautions in these specification sheets. 2. Features . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with LED back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors . +3.3V LVDS interface standard: THC63LVDF64A as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Wide viewing angle . LVDS transmission interface . Module with resistive type touch panel. 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Surface treatment of Touch Panel Display mode Gray scale inversion direction Specifications 7.0(diagonal) 800×(R, G, B)×480 262,144 152.4(H)×91.44(V) 0.1905(H)×0.1905(V) Stripe 166.3(W)×105.5 (H)×11.5(D) (typ.) 300+15 33-LED Anti-glare and EWV Film 3H Normally white 6 o’clock Unit inch dot mm mm mm g Note 14-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PM070WM3 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PM070WM3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PM070WM3 5. Input Terminals 5-1) TFT-LCD Panel Driving Connector type: DF19K-20P-1H (56)(HRS) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol Vcc Vcc GND GND INOINO+ GND IN1IN1+ GND IN2IN2+ GND CLKCLK+ GND NC NC GND GND Function +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS receiver signal channel 0 LVDS receiver signal channel 0 Ground LVDS receiver signal channel 1 LVDS receiver signal channel 1 Ground LVDS receiver signal channel 2 LVDS receiver signal channel 2 Ground LVDS receiver signal clock LVDS receiver signal clock Ground No connection No connection Ground Ground Remark LVDS Interface Block Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PM070WM3 Recommended Transmitter (THC63LVDM63A THINE) to PM070WM3 interface Assignment DENB input signal. If customer wanted to off the DENB mode, you must keep the DENB always High or Low. 1 0 5 6 tc 8 0 0 tc DENB (tc: the period of sampling clock) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PM070WM3 6. Touch Panel Characteristics 6-1) Pin assignment Pin No. 1 2 3 4 Symbol YU XR YD XL Function Upper electrode Y(Upper side) Lower electrode X(Right side) Upper electrode Y(Down side) Lower electrode X(Left side) Remark 6-2) Electrical Performances Parameters Terminal Resistance Input Voltage Linearity(X ,Y direction) Insulation Impedance Response Time Operation Force Symbol X Y VT MIN. 550 200 20 - Typ. 800 300 5.0 - MAX. 1025 420 7.0 ±1.5 15 80 Unit Ω Ω V % MΩ ms g Remark DC=25V Note 6 - 1 Note 6-1: Input through 0.8R stylus or R8.0mm finger. 6-3) Durability Performances 1. Hitting Durability: At least 1,000,000 times with R8.0mm silicon rubber, 250g, 3times/sec. 2. Sliding Durability: At least 100,000 times with R0.8mm placental stylus, 250g, 60mm/sec. 6-4) Integration Design Guide Avoid the design that Front-case overlap and press on the active area of the touch-panel. Give enough gap (over 0.5mm at compressed) between the front case and touch-panel to protect wrong operating. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PM070WM3 Use a buffer material (Gasket) between the touch-panel and front-case to protect damage and wrong operating. Avoid the design that buffer material overlap and press on the inside of touch-panel viewing area. Note: We strongly suggest to follow above design guide to avoid the linear defect happened on the touch panel. 7. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Storage Temperature Operation Temperature Note 7-1: LVDS signal. Symbol VCC VIN Tst Top MIN. -0.3 -0.3 -30 -20 MAX. +4.0 VCC +0.3 +80 +70 GND=0V, Ta=25℃ Unit Remark V V Note 7-1 ℃ ℃ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:10 PM070WM3 8. Electrical Characteristics GND = 0V，Ta = 25℃ 8-1) Recommended Operating Conditions: Item Symbol Min. Typ. Max. Unit Remark V Supply Voltage 3.0 3.3 3.6 V CC Current Dissipation ICC 130 195 mA Note8-1 429 643.5 mW Vcc= 3.3 V Total power consumption Pcc LVDS Differential input high threshold VTH 100 mV Note 8-2 LVDS Differential input low threshold VTL -100 mV Note 8-1: To test the current dissipation of VCC, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black ICC current dissipation testing pattern Note8-2: Please refer to THC63LVDF64A specification by THINE Corporation. This LCD module conforms to LVDS standard. 8-2) Recommended Driving Condition for Back Light Ta = 25℃ Remark Note 8-3 Note 8-4 Note 8-3 /Note 8-5 Parameter Symbol Min TYP MAX Unit Supply voltage of LED backlight VLED1~11 (11) V Supply current of LED backlight ILED1~11 16 mA Backlight Power Consumption PLED 1.94 W Note 8-3: ILED= 16mA, constant current Note 8-4: The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 16mA * 11 = 176mA Note 8-5: PLED = VLED1 * ILED1 + VLED2 * ILED2…. + VLED10 * ILED10+VLED11 * ILED11 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:11 PM070WM3 8-3) Backlight driving Connector type: JST BHSR-02VS-1N, PIN No 2 pin Pin No 1 2 Symbol + - Description Input terminal (Anode) Input terminal (Cathode) Remark Wire color : Red Wire Color : Black 9. Pixel Arrangement R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 478 th Line RGB RGB RGB 479 th Line RGB RGB RGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:12 PM070WM3 10. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:13 PM070WM3 11. Block Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:14 PM070WM3 12. Interface Timing 12-1) Timing Parameters Power supply CLK Frequency Symbol VCC 1/tc tc Hp Min. 3.0 10 0 - Typ. 3.3 32 31.25 33 1056 800 128 88 40 216 0 17.325 525 480 2 33 10 35 Max. 3.6 Tc-10 200 - Unit V MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp T1 860 1056 1064 tc T2 - 800 - tc T3 - 480 - T1 T4 490 525 590 T1 Dcd Ddc 10 8 - - ns ns HSYNC Period Hdp Hpw Hbp Hfp VSYNC Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync Period Display period Pulse width Back-porch Front-porch Vpw+Vbp Horizontal scanning period Horizontal display period Vertical display period Frame cycling period CLK-DATA DATA-CLK Vdp Vpw Vbp Vfp DENB R,G,B Hhc Hvh Vp Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:15 PM070WM3 12-2) The Timing Diagram (A) Input signal range tc Dcd R05-R00 G05-G00 B05-B00 Ddc DENB (B) HSYNC timing Hp Hpw HSYNC Hdp Hbp Hfp R,G,B Valid data (C) CLK,HSYNC relationship CLK Hhc HSYNC (D) HSYNC, VSYNC relationship The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:16 PM070WM3 (E) VSYNC timing DENB (F) DENB timing Line 1 Line 480 Line 1 Line 2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:17 PM070WM3 13. Power on Sequence Vcc Logic Signal Backlight ON OFF >10ms OFF >10ms 1. 0＜t1≦20ms 2. 0＜t2≦50ms 3. 0＜t3≦1s 14. Optical Characteristics 14-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Rise Response time Fall Brightness LED Life Time Luminance Uniformity White Chromaticity Cross Talk Symbol θ22.21 θ12 θ11 CR Tr Tf L U x y - Condition CR≧10 θ=0° θ=0° θ=0°/φ=0° 25℃ θ=0°/φ=0° θ=0° MIN. ±75 55 65 400 300 20000 70 0.27 0.29 - TYP. MAX. ±80 60 70 600 5 10 15 20 330 30000 75 0.31 0.35 0.33 0.37 3.5 Unit deg deg deg ms ms cd/㎡ hrs % % Ta=25℃ Remarks Note 14-1 Note 14-2 Note 14-3 Note 14-4 Note 14-5 Note 14-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:18 PM070WM3 Note 14-1: The definitions of viewing angles are as follow. Note 14-2: The definition of contrast ratio CR = Note 14-3: Luminance when Testing point is White Luminance when Testing point is Black Definition of Response Time Tr and Tf White Black White 100% 90% Brightness 10% 0% Tr Tf Note 14-4: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25℃ and ILED =176mA The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:19 PM070WM3 Note 14-5: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white. U= 1/6 2/6 2/6 1/6 1/6 2/6 Note 14-6 : Cross Talk (CTK) = 2/6 1/6 ⏐YA-YB⏐ ×100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:20 PM070WM3 15. Handling Cautions 15-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt’s. d) Please following the tear off direction as figure15-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 15-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 15-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 15-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 15-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:21 PM070WM3 16. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (Operating) Test Condition Ta = +80℃, 240 hrs Ta = -30℃, 240 hrs Ta = +70℃, 240 hrs Ta = -20℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs (No Condensation) -30℃Æ+80℃, 100 Cycles 30min 30min Frequency：10 ~ 55 HZ , Amplitude：1 mm Sweep time: 11 min Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times C=150pF. R=330Ω. Contact=+8KV ; Air=+15KV 10times/point, 5 points/panel face Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect ,no image), All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:22 PM070WM3 17. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:23