AZ951/AZ952 SUBMINIATURE POWER RELAY FEATURES • • • • • • • • Subminiature size for high density packaging Coil sensitivity to 116 mW Extremely low cost Coils to 24 VDC Epoxy sealed for automatic wave soldering 1 Amp, 3 Amp & 5 Amp contacts Life expectancy to 10 million operations UL, CUR file E43203 GENERAL DATA CONTACTS Arrangement SPDT (1 Form C) Ratings Resistive load: Light Duty Medium Duty Heavy Duty Max. switched power: 30 W or 125 VA Max. switched current: 1 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 1 A at 30 VDC 1 A at 125 VAC Max. switched power: 90 W or 375 VA Max. switched current: 3 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 3 A at 30 VDC 3 A at 125 VAC Max. switched power: 150 W or 625 VA Max. switched current: 5 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 5 A at 30 VDC 5 A at 125 VAC 270 VA, 120 VAC Pilot Duty N.O. 30k cycles, N.C. 6k cycles Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 3 A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppressions) Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -25°C (-13°F) to 55°C (131°F) Sensitive: -25°C (-13°F) to 75°C (167°F) Storage Both: -25°C (-13°F) to 105°C (221°F) Vibration 0.062" DA at 10–55Hz Shock 15 g Material Light and Medium Duty: Silver, gold plated Heavy Duty: Silver nickel gold plated Enclosure P.B.T. polyester Resistance < 100 milliohms initially Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3.5 grams COIL Power At Pickup Voltage (typical) Standard Coil: 253 mW Sensitive coil: 116 mW Max Continuous Dissipation 0.8 W at 20°C (68°F) ambient 0.6 W at 40°C (104°F) ambient Temperature Rise At nominal coil voltage: Standard: 54°C (97°F) Sensitive: 30°C (54°F) 1. All values at 20°C (68°F). 105°C (221°F) 3. Other coil resistances and sensitivities available upon request. Max. Temperature NOTES 2. Relay may pull in with less than “Must Operate” value. 4. Specifications subject to change without notice. 2/20/08W AZ951/AZ952 RELAY ORDERING DATA STANDARD RELAYS — Light Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 6.7 Coil Resistance ±10% 56 Must Operate VDC 3.75 ORDER NUMBER AZ951–1C–5DE AZ952–1C–5DE 6 8.0 80 4.50 AZ951–1C–6DE AZ952–1C–6DE 12 16.0 320 9.00 AZ951–1C–12DE AZ952–1C–12DE 24 32.0 1280 18.00 AZ951–1C–24DE AZ952–1C–24DE SENSITIVE RELAYS — Light Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.5 Coil Resistance ±10% 120 Must Operate VDC 3.75 ORDER NUMBER AZ951–1C–5DSE AZ952–1C–5DSE 6 10.4 180 4.50 AZ951–1C–6DSE AZ952–1C–6DSE 9 15.3 400 6.75 AZ951–1C–9DSE AZ952–1C–9DSE 12 20.5 700 9.00 AZ951–1C–12DSE AZ952–1C–12DSE 24 41.0 2800 18.00 AZ951–1C–24DSE AZ952–1C–24DSE STANDARD RELAYS — Medium Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 6.7 Coil Resistance ±10% 56 80 ORDER NUMBER Must Operate VDC 3.75 AZ951–1CM–5DE AZ952–1CM–5DE 4.50 AZ951–1CM–6DE AZ952–1CM–6DE 6 8.0 12 16.0 320 9.00 AZ951–1CM–12DE AZ952–1CM–12DE 24 32.0 1280 18.00 AZ951–1CM–24DE AZ952–1CM–24DE SENSITIVE RELAYS — Medium Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8.5 Coil Resistance ±10% 120 Must Operate VDC 3.75 ORDER NUMBER AZ951–1CM–5DSE AZ952–1CM–5DSE 6 10.4 180 4.50 AZ951–1CM–6DSE AZ952–1CM–6DSE 9 15.3 400 6.75 AZ951–1CM–9DSE AZ952–1CM–9DSE 12 20.5 700 9.00 AZ951–1CM–12DSE AZ952–1CM–12DSE 15 25.6 1093 11.30 AZ951–1CM–15DSE AZ952–1CM–15DSE 18 30.8 1575 13.50 AZ951–1CM–18DSE AZ952–1CM–18DSE 24 41.0 2800 18.00 AZ951–1CM–24DSE AZ952–1CM–24DSE STANDARD RELAYS — Heavy Duty Type COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 6.7 Coil Resistance ±10% 56 Must Operate VDC 3.75 ORDER NUMBER AZ951–1CH–5DE AZ952–1CH–5DE 6 8.0 80 4.50 AZ951–1CH–6DE AZ952–1CH–6DE 12 16.0 320 9.00 AZ951–1CH–12DE AZ952–1CH–12DE 24 32.0 1280 18.00 AZ951–1CH–24DE AZ952–1CH–24DE 2/20/08W AZ951/AZ952 MECHANICAL DATA AZ951 PC Board Layout .620 Max [15.75] .423 Max [10.75] .400 [10.16] .465 Max [11.81] 5x .039 ± .005 [1.0] .060 [1.52] .100 [2.54] .125 [3.18] .062 [1.56] .300 [7.62] .100 [2.54] .300 [7.62] VIEWED TOWARD TERMINALS AZ952 PC Board Layout 1 2 1 2 .400 [10.16] 6 7 12 11 7 6x .039 ± .005 [1.0] .300 [7.62] 12 11 .060 [1.52] AZ951 Wiring Diagram VIEWED TOWARD TERMINALS .062 [1.56] AZ952 Wiring Diagram VIEWED TOWARD TERMINALS .100 [2.54] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 2/20/08W