ETC AZ954X-1C-12DM

AZ954
SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
•
Subminiature size for high density packaging
Coil sensitivity to 114 mW
Extremely low cost
Coils to 24 VDC
Epoxy sealed for automatic wave soldering
2 Amp contacts
Class B and F insulation available
Life expectancy to 10 million operations
UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
Ratings
Resistive load:
Light Duty
Medium Duty
Max. switched power: 30 W or 125 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 1 A at 125 VAC General Use
1 A at 30 VDC Resistive
Max. switched power: 30 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 2 A at 125 VAC General Use
1 A at 30 VDC Resistive.
Material
Silver alloy
Resistance
< 100 milliohms initially
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at rated load
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppressions)
Dielectric Strength
1250 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation Resistance
100 megohms min. at 20°C, 500 VDC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
0.45W: -25°C (-13°F) to 55°C (131°F)
0.36W: -25°C (-13°F) to 65°C (167°F)
0.2W:
-25°C (-13°F) to 75°C (167°F)
COIL
Storage
-25°C (-13°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55Hz
0.45W coil: 253 mW
0.36W coil: 203 mW
0.2W coil: 114 mw
Shock
15 g
Enclosure
P.B.T. polyester
Max Continuous
Dissipation
0.8 W at 20°C (68°F) ambient
0.6 W at 40°C (104°F) ambient
Terminals
Tinned copper alloy
Temperature Rise
At nominal coil voltage:
0.45W: 54°C (97°F)
0.36W: 44°C (79°F)
0.2W: 30°C (54°F)
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
105°C (221°F)
Max. Immersion Time
30 seconds
Weight
3.5 grams
Power
At Pickup Voltage
(typical)
Max. Temperature
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
ZETTLER
electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-06-06
AZ954
RELAY ORDERING DATA
MEDIUM DUTY RELAYS – 0.45 W COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Max. Continuous
VDC
4.0
Coil Resistance
±10%
20
Must Operate
VDC
2.25
ORDER NUMBER*
AZ954X–1C–3D
AZ954Y–1C–3D
5
6.7
56
3.75
AZ954X–1C–5D
AZ954Y–1C–5D
6
8.0
80
4.50
AZ954X–1C–6D
AZ954Y–1C–6D
9
12.0
180
6.75
AZ954X–1C–9D
AZ954Y–1C–9D
12
16.0
320
9.0
AZ954X–1C–12D
AZ954Y–1C–12D
24
32.0
1280
18.0
AZ954X–1C–24D
AZ954Y–1C–24D
MEDIUM DUTY RELAYS – 0.36 W COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Max. Continuous
VDC
4.5
ORDER NUMBER*
Coil Resistance
±10%
25
Must Operate
VDC
2.25
AZ954X–1C–3DM
AZ954Y–1C–3DM
5
7.5
70
3.75
AZ954X–1C–5DM
AZ954Y–1C–5DM
6
8.9
100
4.50
AZ954X–1C–6DM
AZ954Y–1C–6DM
9
13.4
225
6.75
AZ954X–1C–9DM
AZ954Y–1C–9DM
12
17.8
400
9.0
AZ954X–1C–12DM
AZ954Y–1C–12DM
24
35.7
1600
18.0
AZ954X–1C–24DM
AZ954Y–1C–24DM
LIGHT DUTY RELAYS – 0.2 W COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
3
Max. Continuous
VDC
6.0
Coil Resistance
±10%
45
Must Operate
VDC
2.25
ORDER NUMBER*
AZ954X–1C–3DS
AZ954Y–1C–3DS
5
9.8
120
3.75
AZ954X–1C–5DS
AZ954Y–1C–5DS
6
12.0
180
4.50
AZ954X–1C–6DS
AZ954Y–1C–6DS
9
17.8
400
6.75
AZ954X–1C–9DS
AZ954Y–1C–9DS
12
23.6
700
9.0
AZ954X–1C–12DS
AZ954Y–1C–12DS
24
47.3
2800
18.0
AZ954X–1C–24DS
AZ954Y–1C–24DS
*Add suffix “E” for epoxy sealed version. Add suffix “B” for Class B or “F” for Class F insulation system.
MECHANICAL DATA
.620
[15.75]
AZ954X PC BOARD LAYOUT
.423
[10.75]
.400
[10.16]
.465
[11.81]
5x ø.039±.005
[ø1.0]
.060
[1.52]
.060
[1.52]
.100
[2.54]
.125
[3.18]
AZ954X WIRING DIAGRAM
1
.300
[7.62]
1
.300
[7.62]
.100
[2.54]
VIEWED TOWARD TERMINALS
AZ954Y PC BOARD LAYOUT
AZ954Y WIRING DIAGRAM
2
.062
[1.56]
.400
[10.16]
2
.062
[1.56]
6
6x ø.039±.005
[ø1.0]
7
7
12
11
12
VIEWED TOWARD TERMINALS
.300
[7.62]
11
VIEWED TOWARD TERMINALS
.060
[1.52]
.100
[2.54]
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
ZETTLER
electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-06-06