CEL PS2701A-1-F4

PHOTOCOUPLER
PS2701A-1
HIGH ISOLATION VOLTAGE
SOP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS2701A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor to realize an excellent cost performance.
This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.
It is designed for high density mounting applications.
PIN CONNECTION
FEATURES
(Top View)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• SOP (Small Outline Package) type
4
3
• Ordering number of taping product: PS2701A-1-F3, F4
• Pb-Free product
1
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• Hybrid IC
• Measuring instruments
• Power supply
• Programmable logic controllers
Document No. PN10396EJ02V0DS (2nd edition)
Date Published December 2004 CP(K)
The mark  shows major revised points.
2
1. Anode
2. Cathode
3. Emitter
4. Collector
PS2701A-1
PACKAGE DIMENSIONS (in millimeters)
PS2701A-1
4.0±0.5
3
4
0.1±0.1
2.0
0.15 +0.10
–0.05
2
1
2.1±0.2
7.0±0.3
4.4
2.54
0.5±0.3
0.4 +0.10
–0.05
0.25 M
MARKING EXAMPLE
No. 1 pin
Mark
701A
N301
Assembly Lot
*1
N
3
01
Week Assembled
Year Assembled
(Last 1 Digit)
CTR Rank Code
*1 Bar : Pb-Free
Remark "PS2" and "-1" are omitted from original type number
2
Data Sheet PN10396EJ02V0DS
PS2701A-1
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
PS2701A-1
PS2701A-1
Solder
Magazine case 100 pcs
Standard products
PS2701A-1-F3
PS2701A-1-F3
contains lead
Embossed Tape 3 500 pcs/reel
(UL approved)
PS2701A-1-F4
PS2701A-1-F4
PS2701A-1-V
PS2701A-1-V
Magazine case 100 pcs
DIN EN60747-5-2
PS2701A-1-V-F3
PS2701A-1-V-F3
Embossed Tape 3 500 pcs/reel
(VDE0884 Part2)
PS2701A-1-V-F4
PS2701A-1-V-F4
PS2701A-1
PS2701A-1-A
PS2701A-1-F3
PS2701A-1-F3-A
PS2701A-1-F4
PS2701A-1-F4-A
PS2701A-1-V
Application Part
*1
Number
PS2701A-1
Approved (Option)
Pb-Free
Magazine case 100 pcs
Standard products
Embossed Tape 3 500 pcs/reel
(UL approved)
PS2701A-1-V-A
Magazine case 100 pcs
DIN EN60747-5-2
PS2701A-1-V-F3
PS2701A-1-V-F3-A
Embossed Tape 3 500 pcs/reel
(VDE0884 Part2)
PS2701A-1-V-F4
PS2701A-1-V-F4-A
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10396EJ02V0DS
3
PS2701A-1
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
30
mA
Reverse Voltage
VR
6
V
∆PD/°C
0.8
mW/°C
PD
80
mW
IFP
0.5
A
Collector to Emitter Voltage
VCEO
70
V
Emitter to Collector Voltage
VECO
5
V
IC
30
mA
∆PC/°C
1.5
mW/°C
PC
150
mW
BV
3 750
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +100
°C
Storage Temperature
Tstg
–55 to +150
°C
Diode
Power Dissipation Derating
Power Dissipation
Peak Forward Current
Transistor
*1
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
*2
*1 PW = 100 µs, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
4
Data Sheet PN10396EJ02V0DS
PS2701A-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
Symbol
Conditions
Forward Voltage
VF
IF = 5 mA
Reverse Current
IR
VR = 5 V
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
Transistor
Collector to Emitter Dark
Current
ICEO
IF = 0 mA, VCE = 70 V
Coupled
Current Transfer Ratio
CTR
IF = 5 mA, VCE = 5 V
Collector Saturation
Voltage
VCE (sat)
IF = 10 mA, IC = 2 mA
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
MIN.
TYP.
MAX.
Unit
1.2
1.4
V
5
µA
10
50
pF
100
nA
300
%
0.3
V
*1
(IC/IF)
Rise Time
Fall Time
*2
tr
*2
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tf
0.13
10
Ω
11
0.4
pF
5
µs
7
*1 CTR rank
N: 50 to 300 (%)
P: 150 to 300 (%)
L: 100 to 300 (%)
M: 50 to 150 (%)
*2 Test circuit for switching time
Pulse input
VCC
PW = 100 µs,
Duty cycle = 1/10
IF
50 Ω
VOUT
RL = 100 Ω
Data Sheet PN10396EJ02V0DS
5
PS2701A-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
TRANSISTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
100
0.8 mW/˚C
80
60
40
20
0
0
25
50
75
100
150
100
50
0
0
25
50
75
100
Ambient Temperature TA (˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
30
TA = +100˚C
+60˚C
+25˚C
10
5
0˚C
–25˚C
–55˚C
1
0.5
IF = 10 mA
25
20
15
5 mA
10
2 mA
5
1 mA
0.1
0.05
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
0
0
1.5
Forward Voltage VF (V)
4
6
8
10
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
10 000
10
IF = 10 mA
5 mA
Collector Current IC (mA)
Collector to Emitter Dark Current ICEO (nA)
2
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
VCE = 24 V
1 000
VCE = 70 V
100
10
1
0
25
50
75
100
2 mA
Remark
1 mA
1
0.1
Ambient Temperature TA (˚C)
6
125
Ambient Temperature TA (˚C)
Collector Current IC (mA)
Forward Current IF (mA)
1.5 mW/˚C
125
100
50
200
0
0.2
0.4
0.6
0.8
Collector Saturation Voltage VCE (sat) (V)
The graphs indicate nominal characteristics.
Data Sheet PN10396EJ02V0DS
1.0
PS2701A-1
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
1.2
Current Transfer Ratio CTR (%)
1.0
0.8
0.6
0.4 Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VCE = 5 V
0.2
90%
300%
0
–75 –50 –25
0
100
Switching Time t ( µ s)
300
25
50
75
250
VCE = 5 V,
n=3
200
Sample A
B
C
150
100
50
0
0.01
100
0.1
1
10
Ambient Temperature TA (˚C)
Forward Current IF (mA)
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
100
1 000
IC = 2 mA, VCC = 5 V,
CTR = 236 %
IF = 5 mA, VCC = 5 V,
CTR = 236 %
tf
tr
Switching Time t ( µ s)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
10
td
ts
1
tf
100
ts
10
tr
0.1
10
100
1 000
td
1
1
10 000
Load Resistance RL (Ω)
10
100
Load Resistance RL (kΩ)
LONG TERM CTR DEGRADATION
FREQUENCY RESPONSE
5
1.2
0
1.0
–5
100 Ω
–10
300 Ω
–15
RL = 1 kΩ
–20
1
10
0.8
TA = 25˚C
0.6
100
1 000
0
10
Frequency f (kHz)
Remark
TA = 60˚C
0.4
0.2
IF = 5 mA,
VCE = 5 V
–25
0.1
CTR (Relative Value)
Normalized Gain GV
IF = 5 mA (TYP.)
102
103
104
105
Time (Hr)
The graphs indicate nominal characteristics.
Data Sheet PN10396EJ02V0DS
7
PS2701A-1
TAPING SPECIFICATIONS (in millimeters)
1.55±0.1
2.9 MAX.
7.4±0.1
5.5±0.05
1.5+0.1
–0
12.0±0.2
2.0±0.05
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.4±0.1
4.6±0.1
0.3
8.0±0.1
Tape Direction
PS2701A-1-F3
PS2701A-1-F4
Outline and Dimensions (Reel)
φ 21.0±0.8
φ 13.0±0.2
R 1.0
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
13.5±1.0
17.5±1.0
11.9 to 15.4
Outer edge of
flange
Packing: 3 500 pcs/reel
8
Data Sheet PN10396EJ02V0DS
PS2701A-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10396EJ02V0DS
9
PS2701A-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
10
Data Sheet PN10396EJ02V0DS
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.