Solid State Relay OCMOS FET PS7206-1A 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET DESCRIPTION The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. FEATURES • Low on-state resistance (Ron = 0.6 Ω TYP.) • Large continuous load current (IL = 600 mA) • 1 channel type (1 a output) • Designed for AC/DC switching line changer • Small and thin package (4-pin SOP, Height = 2.1 mm) • High isolation voltage (BV = 1 500 Vr.m.s.) • Low offset voltage • Ordering number of taping product: PS7206-1A-E3, E4, F3, F4 APPLICATIONS • Measurement equipment • FA equipment Document No. PN10297EJ01V0DS (1st edition) (Previous No. P14496EJ5V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7206-1A PACKAGE DIMENSIONS in millimeters 4.0±0.5 TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 1 2 0.05+0.08 –0.05 2.05+0.08 –0.05 0.15+0.10 –0.05 7.0±0.3 4.4 2 0.5±0.3 2.54 0.40+0.10 –0.05 0.25 M Data Sheet PN10297EJ01V0DS PS7206-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7206-1A Package Packing Style 4-pin SOP Magazine case 100 pcs PS7206-1A-E3 Application Part Number *1 PS7206-1A Embossed Tape 900 pcs/reel PS7206-1A-E4 PS7206-1A-F3 Embossed Tape 3 500 pcs/reel PS7206-1A-F4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7206-1A-A Package Packing Style 4-pin SOP Magazine case 100 pcs PS7206-1A-E3-A Application Part Number *1 PS7206-1A Embossed Tape 900 pcs/reel PS7206-1A-E4-A PS7206-1A-F3-A Embossed Tape 3 500 pcs/reel PS7206-1A-F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V Power Dissipation PD 50 mW IFP 1 A Break Down Voltage VL 60 V Continuous Load Current IL 600 mA ILP 1.2 A PD 300 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 350 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C Diode Peak Forward Current MOS FET Pulse Load Current *1 *2 (AC/DC Connection) Power Dissipation Isolation Voltage *3 *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10297EJ01V0DS 3 PS7206-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V 5.0 µA Off-state Leakage ILoff VD = 60 V 1.0 µA Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 600 mA On-state Resistance Ron IF = 10 mA, IL = 600 mA, t ≤ 10 ms Turn-on Time ton Turn-off Time toff Current Coupled 70 pF 2.0 mA 0.6 0.8 Ω IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.4 2.0 ms PW ≥ 10 ms 0.08 0.5 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 Ω 9 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton 4 Data Sheet PN10297EJ01V0DS toff PS7206-1A TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 900 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 50 75 85 600 300 0 –25 100 0 25 75 85 50 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.8 100 200 1.4 1.2 1.0 0.8 –25 10 Off-state Leakage Current ILoff (A) Output Capacitance Cout (pF) 1.6 0 25 50 75 100 150 100 50 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE –6 900 IF = 10 mA, IL = 600 mA VD = 60 V 600 10–7 Load Current IL (mA) Forward Voltage VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 10–8 10–9 300 –0.8 –0.4 0 0.4 0.8 –300 –10 10 10–11 0 –600 20 40 60 80 –900 Load Voltage VL (V) Ambient Temperature TA (˚C) Data Sheet PN10297EJ01V0DS 5 PS7206-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 600 mA 2.5 2.0 1.5 1.0 n = 50 pcs, IF = 10 mA, IL = 600 mA t 10 ms 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0.5 0.0 –25 0 25 50 75 0 100 0.4 TURN-OFF TIME vs. FORWARD CURRENT TURN-ON TIME vs. FORWARD CURRENT 3.0 0.30 VO = 5 V, RL = 500 Ω 2.0 1.5 1.0 0.20 0.15 0.10 0.05 0.5 5 10 15 20 25 0 30 Forward Current IF (mA) 15 10 15 20 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 20 15 10 5 5 0.4 0.6 25 TURN-OFF TIME DISTRIBUTION Number (pcs) Number (pcs) 20 10 30 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 5 Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 0 0.08 0.12 Turn-off Time toff (ms) Turn-on Time ton (ms) 6 VO = 5 V, RL = 500 Ω 0.25 Turn-off Time toff (ms) Turn-on Time ton (ms) 2.5 0 0.8 On-state Resistance Ron (Ω) Ambient Temperature TA (˚C) 0 0.6 Data Sheet PN10297EJ01V0DS 30 PS7206-1A NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 3.0 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10297EJ01V0DS 7 PS7206-1A TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.9 MAX. 12.0±0.2 5.5±0.05 1.5+0.1 –0 7.4±0.1 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.4±0.1 4.6±0.1 0.3 8.0±0.1 Tape Direction PS7206-1A-E3 PS7206-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 φ 60 +1 –0 R 1.0 φ 180+0 –1.5 2.0±0.5 φ13.0±0.2 φ 21.0±0.8 13.5±1.0 17.5±1.0 Packing: 900 pcs/reel 8 Data Sheet PN10297EJ01V0DS 11.9 to 15.4 Outer edge of flange PS7206-1A 1.55±0.1 2.9 MAX. 7.4±0.1 5.5±0.05 1.5+0.1 –0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.4±0.1 4.6±0.1 0.3 8.0±0.1 Tape Direction PS7206-1A-F4 PS7206-1A-F3 Outline and Dimensions (Reel) φ 21.0±0.8 φ 100±1.0 R 1.0 φ 13.0±0.2 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel Data Sheet PN10297EJ01V0DS 11.9 to 15.4 Outer edge of flange 9 PS7206-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10297EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.