Solid State Relay OCMOS FET PS7141-1B,-2B,PS7141L-1B,-2B 6, 8-PIN DIP, 400 V BREAK DOWN VOLTAGE, NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7141-1B, -2B and PS7141L-1B, -2B are solid state relays containing GaAs LEDs on the light emitting side (input side) and normally close (N.C.) contact MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7141L-1B, -2B have a surface mount type lead. FEATURES • 1 channel type (1 b output) or 2 channel type (1 b + 1 b output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (6, 8-pin DIP) • Low offset voltage • PS7141L-1B, -2B: Surface mount type • UL approved: File No. E72422 (S) (PS7141-1B, PS7141L-1B only) • BSI approved: No. 8245/8246 • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment Document No. PN10279EJ01V1DS (1st edition) (Previous No. P12814EJ5V0DS00) The mark shows major revised points. PS7141-1B,-2B,PS7141L-1B,-2B PACKAGE DIMENSIONS (in millimeters) PS7141-1B PS7141L-1B TOP VIEW 9.25±0.5 1. 2. 3. 4. 5. 6. 6 5 4 1 2 3 TOP VIEW 9.25±0.5 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 1. 2. 3. 4. 5. 6. 6 5 4 1 2 3 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 7.62 6.5±0.5 0.10+0.10 –0.05 3.5±0.3 3.5±0.3 3.3±0.3 4.15±0.3 6.5±0.5 0.5±0.1 1.34±0.1 0.25 M 0.9±0.25 2.54 1.34±0.1 0.25 M 9.60±0.4 0 to 15˚ 2.54 PS7141L-2B PS7141-2B TOP VIEW 9.25±0.5 TOP VIEW 8 7 6 5 1 2 3 4 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 9.25±0.5 8 7 6 5 1 2 3 4 1. LED Anode 5. MOS FET 2. LED Cathode 6. MOS FET 3. LED Anode 7. MOS FET 4. LED Cathode 8. MOS FET 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 7.62 2 0.10+0.10 –0.05 1.34±0.1 0.25 M 0 to 15˚ 0.5±0.1 1.34±0.1 0.25 M 6.5±0.5 3.5±0.3 3.3±0.3 4.15±0.3 3.5±0.3 6.5±0.5 2.54 Data Sheet PN10279EJ01V1DS 2.54 0.9±0.25 9.60±0.4 PS7141-1B,-2B,PS7141L-1B,-2B ORDERING INFORMATION (Solder Contains Lead) Part Number PS7141-1B Package 6-pin DIP Packing Style Magazine case 50 pcs PS7141L-1B Application Part Number *1 PS7141-1B PS7141L-1B PS7141L-1B-E3 Embossed Tape 1 000 pcs/reel PS7141L-1B-E4 PS7141-2B 8-pin DIP Magazine case 50 pcs PS7141L-2B PS7141-2B PS7141L-2B PS7141L-2B-E3 Embossed Tape 1 000 pcs/reel PS7141L-2B-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7141-1B-A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7141L-1B-A Application Part Number *1 PS7141-1B PS7141L-1B PS7141L-1B-E3-A Embossed Tape 1 000 pcs/reel PS7141L-1B-E4-A PS7141-2B-A 8-pin DIP Magazine case 50 pcs PS7141L-2B-A PS7141L-2B-E3-A PS7141-2B PS7141L-2B Embossed Tape 1 000 pcs/reel PS7141L-2B-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10279EJ01V1DS 3 PS7141-1B,-2B,PS7141L-1B,-2B ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Ratings Parameter Diode Symbol PS7141-2B, PS7141L-1B PS7141L-2B Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW/ch IFP 1 A VL 400 V IL 150 mA Power Dissipation Peak Forward Current MOS FET PS7141-1B, *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 200 − Connection C 300 − *3 ILP 300 mA (AC/DC Connection) Power Dissipation Isolation Voltage PD *4 560 375 BV mW/ch 1 500 610 Vr.m.s. Total Power Dissipation PT 850 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) – 4 6 5 4 6 5 IL 4 IL IL L L IL + I L – + VL (DC) + VL (DC) – *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet PN10279EJ01V1DS PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Conditions Parameter Diode MOS FET Symbol PS7141-1B, PS7141-2B, PS7141L-1B PS7141L-2B MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 µA 1.0 µA Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff IF = 10 mA, VD = 400 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz, IF = 10 mA 185 LED Off-state Current IFoff IL = 150 mA On-state Resistance Ron1 IF = 0 mA, IL = 10 mA Ron2 IF = 0 mA, IL = 150 mA, t ≤ 10 ms Current Coupled Turn-on Time *1 Turn-off Time *1 ton toff IF = 10 mA, IF = 10 mA, VO = 5 V, VO = 5 V, RL = 1.5 kΩ, RL = 500 Ω, PW ≥ 10 ms PW ≥ 10 ms Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 pF/ch 2.0 mA 20 30 Ω 16 25 0.02 0.2 0.2 1.0 ms Ω 9 1.1 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % toff Data Sheet PN10279EJ01V1DS ton 5 PS7141-1B,-2B,PS7141L-1B,-2B TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 7585 50 200 100 0 –25 100 0 25 75 85 50 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.6 100 200 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1.2 1.0 1 mA 0.8 –25 0 25 50 75 Output Capacitance Cout (pF) Forward Voltage VF (V) f = 1 MHz 150 100 50 0 100 20 40 100 120 Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 10 mA IF = 0 mA TA = 85 ˚C 10–6 Load Current IL (mA) Off-state Leakage Current ILoff (A) 80 Ambient Temperature TA (˚C) 10–5 10–7 25 ˚C 10–8 10–9 0 100 200 300 400 100 –4.0 500 –2.0 0 –100 –200 Load Voltage VL (V) Applied Voltage VD (V) 6 60 Data Sheet PN10279EJ01V1DS 2.0 4.0 PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 ˚C, IF = 0 mA, IL = 10 mA 2.5 2.0 1.5 1.0 n = 50 pcs, IF = 0 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0.5 0.0 –25 0 25 50 75 0 100 18 22 Ambient Temperature TA (˚C) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 1.2 1.2 VO = 5 V VO = 5 V 1.0 Turn-off Time toff (ms) Turn-on Time ton (ms) 1.0 0.8 0.6 0.4 0.6 0.4 0.2 0.2 0 0.8 5 10 15 20 25 30 0 Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 15 20 25 30 TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 5 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 10 Forward Current IF (mA) 30 0 5 20 15 10 5 0.02 0.04 0 Turn-on Time ton (ms) 0.2 0.3 Turn-off Time toff (ms) Data Sheet PN10279EJ01V1DS 7 PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 3.0 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 8 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V Data Sheet PN10279EJ01V1DS 100 PS7141-1B,-2B,PS7141L-1B,-2B TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.3±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 10.4±0.1 1.55±0.1 12.0±0.1 0.3 Tape Direction PS7141L-1B-E3 PS7141L-2B-E3 PS7141L-1B-E4 PS7141L-2B-E4 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 21.0±0.8 100±1.0 330±2.0 2.0±0.5 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel Data Sheet PN10279EJ01V1DS 15.9 to 19.4 Outer edge of flange 9 PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10279EJ01V1DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.