4 PIN SOP, 0.9 Ω, LOW ON-STATE RESISTANCE 80 V BREAK DOWN VOLTAGE, 500 mA CONTINUOUS LOAD CURRENT 1-CH OPTICAL COUPLED MOSFET FEATURES PS7205B-1A DESCRIPTION The PS7205B-1A is a low on-state resistance solid state relay containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. • LOW ON-STATE RESISTANCE: Ron = 0.9 Ω TYP • LARGE CONTINUOUS LOAD CURRENT: IL = 500 mA • HIGH-SPEED SWITCHING TIME: ton, toff = 0.5 ms MAX APPLICATIONS • 1 CHANNEL TYPE 1 a output • MEASUREMENT EQUIPMENT • FA EQUIPMENT • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE: 4-pin SOP, Height = 2.1 mm • HIGH ISOLATION VOLTAGE: BV = 1 500 Vr.m.s. • LOW OFFSET VOLTAGE • AVAILABLE IN TAPE AND REEL: PS7205B-1A-E3, E4, F3, F4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER Coupled MOSFET Diode SYMBOLS PS7205B-1A PARAMETERS UNITS MIN TYP MAX 1.1 1.4 VF Forward Voltage IF = 5 mA V IR Reverse Current VR = 5 V µA ILoff Off-state Leakage Current VD = 80 V nA 0.15 Cout Output Capacitance VD = 0 V, f = 1 MHz pF 30 IFon LED On-state Current IL = 500 mA mA Ron On-state Resistance IF = 5 mA, IL = 500 mA, t ≤ 10 ms Ω 0.9 1.2 ton Turn-on Time1, 2 IF = 5 mA, VO = 5 V, RL = 500 Ω, ms 0.18 0.5 toff Turn-off Time1, 2 PW ≥ 10 ms 0.04 0.5 RI-O Isolation Resistance VI-O = 1.0 kVDC Ω CI-O Isolation Capacitance V = 0 V, f = 1 MHz pF 5.0 5.0 2.0 109 0.5 Notes: 1.Test Circuit for Switching Time: IF Pulse Input VL 50% Input 0 Input monitor VO monitor VO = 5 V 90% Output Rin RL 10% ton toff 2. The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. California Eastern Laboratories PS7205B-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current2 mA V mW A 50 5.0 50 1 Break Down Voltage Continuous Load Current Pulse Load Current (AC/DC Connection) V mA A 80 500 1 Power Dissipation mW 300 RECOMMENDED OPERATING CONDITIONS (TA = 25°°C) Diode IF VR PD IFP MOS FET VL IL ILP PD PARAMETER IF LED Operating Current VF LED Off Voltage PART NUMBER PS7205B-1A Voltage4 BV Isolation PT TA Total Power Dissipation Operating Ambient Temperature Storage Temperature Vr.m.s. 1 500 mW °C 350 −40 to +85 °C −40 to +100 UNITS MIN mA 2 V 0 TYP MAX 5 ORDERING INFORMATION Coupled Tstg SYMBOLS PACKAGE 4-pin SOP PS7205B-1A-E3 PACKING STYLE Magazine case 100 pcs Embossed Tape 900 pcs/reel PS7205B-1A-E4 PS7205B-1A-F3 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Embossed Tape 3 500 pcs/reel PS7205B-1A-F4 MARKING 205B 001 Type Number*1 Assembly Lot No.1 pin Mark *1 Applicable type numbers are underlined below OUTLINE DIMENSIONS (Units in mm) PS7205B-1A 4.0±0.5 TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 1 2 0.05+0.08 -0.05 2.05+0.08 -0.05 0.15+0.10 -0.05 7.0±0.3 4.4 0.5±0.3 2.54 0.40+0.10 -0.05 0.25 M 001 Week Assembled Year Assembled (Last 1 Digit) Rank Code Nothing Ink marking N Laser marking 20 0.5 PS7205B-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) MAXIMUM LOAD CURRENT vs AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs AMBIENT TEMPERATURE 600 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 0 25 400 300 200 100 0 -25 75 85 100 50 500 Ambient Temperature TA (°C) 0 25 50 75 85 100 Ambient Temperature TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 35 1.8 1.6 1.4 Output Capacitance Cout (pF) Forward Voltage VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 -25 0 25 50 75 30 25 20 15 10 5 0 100 10 Ambient Temperature TA (°C) 40 LOAD CURRENT vs. LOAD VOLTAGE 10-6 750 IF = 5 mA, IL = 500 mA VD = 80 V 10-7 Load Current IL (mA) Off-state Leakage Current ILoff (A) 30 Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10-8 10-9 10-10 10-11 0 20 500 250 -0.8 -0.4 0 0.4 -250 -500 20 40 60 80 100 Ambient Temperature TA (°C) 120 -750 Load Voltage VL (V) 0.8 PS7205B-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 60 Normalized to 1.0 at TA = 25°C, IF = 5 mA, IL = 500 mA 2.5 2.0 1.5 1.0 40 30 20 10 0.5 0.0 -25 0 25 50 75 0 100 1.8 0.95 1.0 1.05 0.10 VO = 5 V, RL = 500 Ω 1.6 VO = 5 V, RL = 500 Ω 0.09 1.4 Turn-off Time toff (ms) Turn-on Time ton (ms) 0.90 TURN-OFF TIME vs. FORWARD CURRENT TURN-ON TIME vs. FORWARD CURRENT 1.2 1.0 0.8 0.6 0.4 0.2 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 5 10 15 0 20 Forward Current IF (mA) 5 10 15 20 Forward Current IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 60 60 n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω 50 40 50 Number (pcs) Number (pcs) 0.85 On-state Resistance Ron (Ω) Ambient Temperature TA (°C) 30 20 n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω 40 30 20 10 10 0 n = 50 pcs, IF = 5 mA, IL = 500 mA, t 10 ms 50 Number (pcs) Normalized On-state Resistance Ron 3.0 ON-STATE RESISTANCE DISTRIBUTION 0.16 0.18 0.20 0.22 Turn-on Time ton (ms) 0.24 0 0.03 0.04 0.05 0.06 0.07 Turn-off Time toff (ms) PS7205B-1A TYPICAL PERFORMANCE CURVES (TA = 25 °C, unless otherwise specified) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V RL = 500 Ω 2.5 2.0 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature TA (°C) 100 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VO = 5 V RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature TA (°C) 100 PS7205B-1A TAPING SPECIFICATIONS (Units in mm) 1.55±0.1 7.4±0.1 5.5±0.05 φ1.5+0.1 -0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Tape Outline and Dimensions 2.9 MAX. 2.4±0.1 4.6±0.1 8.0±0.1 0.3 Tape Direction PS7205B-1A-E3 PS7205B-1A-E4 Reel Outline and Dimensions 2.0 2.0±0.5 13.0±0.5 60 15° 15° 180 13.0±0.5 21.0±0.8 13.0±1.0 Packing: 900 pcs/reel PS7205B-1A TAPING SPECIFICATIONS (Units in mm) 1.55±0.1 7.4±0.1 5.5±0.05 φ1.5+0.1 -0 12.0±0.2 2.0±0.05 4.0±0.1 1.75±0.1 Tape Outline and Dimensions 2.9 MAX. 2.4±0.1 4.6±0.1 8.0±0.1 0.3 Tape Direction PS7205B-1A-F4 PS7205B-1A-F3 Reel Outline and Dimensions φ 330 2.0±0.5 1.5±0.5 60 ° φ 13.0±0.5 120 ° φ 80±5.0 φ 21.0±0.8 1.5 6.0±1 12.4+2.0 -0.0 Packing: 3 500 pcs/reel PS7205B-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220 °C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260 °C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (°C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 03/04/2002